No results were found for the filter!
Original Beta replacement brake caliper incl. mounting plate for the front axle. Technical data Distance of the mounting holes: 68 mm Piston diameter: 25 mm
Available
€205.90
*
Spring clutch lever Domino, universal
The return spring on the clutch lever guarantees that it always springs back to its original position. If the spring is worn out, it must be replaced as quickly as possible. We offer an inexpensive alternative for this. In plug & play...
Available
€2.49
*
Front wave brake disc from Galfer for KTM Duke or RC 125 from 2014 (vehicles with ABS). Galfer holds various patents on the wave design of brake discs. This design allows better air circulation and thus better heat exchange around the...
Almost gone
€199.90
*
;
€139.93
*
This item is an original spare part (OEM) of the brand KTM. OEM part number for comparison purposes 90142021000 Scope of delivery: 1 piece for rear
Out of Stock
€23.95
*
This item is an original spare part (OEM) of the brand Kawasaki. OEM part number for comparison purposes 210070588 Scope of delivery: 1 pc.
Almost gone
€34.95
*
;
€24.47
*
This item is an original spare part (OEM) of the brand Piaggio. OEM part number for comparison purposes 865801 Scope of delivery: 1 piece for front
Available
€179.90
*
This item is an original spare part (OEM) of the brand KTM. OEM part number for comparison purposes 90110060000 Scope of delivery: 1 piece for rear
Out of Stock
€113.96
*
This item is an original spare part (OEM) of the brand Piaggio. OEM part number for comparison purposes Piaggio: 863247 Scope of supply: 1 pc. for left side
Out of Stock
€13.99
*
This item is an original spare part (OEM) of the brand Piaggio. OEM part number for comparison purposes Piaggio: 863248 Scope of supply: 1 pc. for right side
Out of Stock
€14.99
*
Standard Rieju brake pads, Spanish quality product! - Made by Galfer. OEM part number for comparison purposes: Galfer OEM: FD094I200 Galfer: FD252 Rieju: 0/000.930.0093 Metis: FD0085
Available
€30.95
*
These bolts are usually used as brake disk or sprocket bolts. Although this is a Rieju original spare part, this bolt can of course also be used on all other vehicles and for every conceivable purpose. Technical data Thread: M6 Head:...
Available
€3.29
*
Brake hose, Rieju Marathon, L=1200mm, Front
Steel braided replacement brake hose for Rieju Marathon. Technical data Connections: Eye - Eye Angle: 1x 30°, 1x 70 Length: 120cm / 1,2m
Available
€30.95
*
The fork is of course one of the most important parts of the chassis. In an accident it can happen quickly that the handlebars or triple clamps bend and the handling of the moped is negatively affected. We can offer an original Rieju...
Available
€399.90
*
Footrests and their holders are parts that are often and gladly damaged in a fall. Bent or even broken footrests are uncomfortable and sometimes even dangerous when riding. They should therefore be replaced immediately. OEM part number...
Available
€24.95
*
Footrests and their holders are parts that are often and gladly damaged in a fall. Bent or even broken footrests are uncomfortable and sometimes even dangerous when riding. They should therefore be replaced immediately. OEM part number...
Available
€24.95
*
Original replacement brake disc for Rieju Marathon (MRT) 125 . Dimensions: 180x58x3.5mm. OEM part number for comparison purposes 0/001.090.0207
Available
€69.95
*
Pressure pin, which connects the brake pedal with the master brake cylinder. OEM part number for comparison purposes 0/000.240.5001
Available
€7.49
*
Throttle grip incl. grip rubber and bracket. Original Rieju spare part. OEM part number for comparison 0/000.530.5007
Available
€34.95
*
Available
€3.59
*
In case of damage such as stone chips, it is essential to replace the immersion tube. This is because even the strongest oil scraper ring will lose oil at some point due to unevenness in the bare sealing surface. As a result, the damping...
Available
€104.95
*
Replacement spring to preload the driver footrest. It is needed to ensure the footrest folds out automatically. OEM part number for comparison purposes 0/000.470.5002
Available
€4.49
*
Single pillion footrest from Rieju. Can be mounted on the right or left side. OEM part number for comparison purposes 0/000.740.0330
Available
€23.95
*
The swing arm bearing is exposed to high forces due to constant movement and can wear out quickly. The result is play in the swing arm, which can contribute to poorer handling and is a not inconsiderable safety factor. Scope of delivery...
Available
€13.99
*
Screw side stand, Rieju Marathon (MRT) 125
Screw for side stand mounting. measurements: Thread: M10x1,25 Length: 52mm
Available
€7.79
*
With the right parts on your brakes, the chassis, the frame and the suspension of your motorcycle, you ensure the optimal driving experience and maximum safety.
.
"Who brakes later drives longer fast", you know yes. But then you should also have good brakes! Do not save there at the wrong end and they to that you regularly the brake lining and the brake discs at your motorcycle checks.
.
With the right levers and cables, you ensure a pleasant response when braking and clutching. This should not be underestimated, if you have ever sat half a day in the saddle and pulled a few hundred times on the lever, it can already be exhausting.
With the right fork and the optimal shock absorbers on your bike, you ensure your perfect comfort. Or just not, if you want to have more of a sporty seat and driving feel.
.
Viewed