No results were found for the filter!
Dimensions: Mounting hole spacing: 40mm; diameter: 6.5mm Total length: 83mm Connection: top Connection thread: M10x1mm Piston diameter: 12mm OEM number for comparison : 25.91177.009
Available
€48.95
*
In this universal brake fitting are only 2 things to note. Firstly, it fits on handlebars with a 22mm diameter. Secondly, no mirror thread is pre-drilled.
Available
€20.95
*
Standard pad compound for virtually all applications. The optimal performance offer the pads under normal driving conditions, so with rather cool brake system. The stability is of course also given at high temperatures, but the pads tend...
Available
€24.95
*
;
€15.95
*
CNC machined brake fluid reservoir from Motoflow. Available in different colors.
Available
€19.95
*
;
From €15.00
*
Among our handlebar attachments is also a cover for the front brake cylinder. The cover consists of 2 parts, which are connected by the mounting screws. Both parts were CNC-milled and are made of aluminum. The cover is available in 3...
Available
€22.95
*
Faulty braking effect is life-threatening and often due to a leaking brake pump. Repair is not always sensible or possible. In many cases there is no way around replacement. With this we offer an inexpensive universal part. Colour:...
Available
€39.95
*
Preassembled brake caliper incl. axle carrier and brake pads for Rieju Marathon (MRT) 125 . OEM part number for comparison purposes 0/000.860.5102
Available
€77.95
*
Cheap alternative to expensive original brake pads, but still high quality! This set of brake pads is suitable for everyday use, especially the longevity and solid brake performance characterize them. Technical data Dimensions: 85x42,5mm...
Available
€19.99
*
;
€13.95
*
CNC machined brake cylinder cover, fits on the rear master cylinder of the Aprilia RX & SX models from 2018 up, available in different colours. Delivery without seal! Aprilia OEM Part No.: Part of 2R000490
Available
€14.95
*
;
From €5.99
*
Typical brake disks, or sprocket bolt with blue dry thread lock (medium strength). Can also be used anywhere else on the moped. Thread: M6 Head: Flat / Torx Length: 20 mm
Available
€1.99
*
During maintenance work on the brake system, these small parts are often lost. The bleeder nipple can then become clogged and maintenance of the brake system becomes impossible the next time. A cover should therefore always be installed!
Available
€2.99
*
Faulty braking effect is life-threatening and often due to a leaking brake pump. Repair is not always sensible or possible, in many cases there is no way around replacement. Technical data Distance between the mounting holes: 50 mm...
Available
€27.95
*
Standard brake pad set from Motoflow. The compound is ideal for all applications involving road traffic. For racing purposes sports pads should be used due to the higher thermal load. Please compare the illustrated shape before...
Available
€13.99
*
;
€8.99
*
⚠️Aufgrund Due to the large number of different rims used, it is not always possible to assign brake discs, as well as sprockets, without any doubt. We therefore ask you to compare the technical data specified in the item description...
Available
€19.99
*
;
€19.95
*
Universal hand brake cylinder for the front disc brake. The complete fitting is delivered including brake lever and is equipped with a brake light switch. The brake cylinder is ideal for handlebar conversions and/or as an alternative...
Available
€22.95
*
NEW
Brake disk, Sherco SE/SM 125 from 23 years of construction, 300mm, front end
The brake disc with an outer diameter of 300 mm offers optimum braking function, even under tough conditions, thanks to its special sporty design. Optimum design ensures perfect heat dissipation, guaranteeing braking safety at all times.
Almost gone
€56.95
*
NEW
Original Beta replacement brake caliper incl. mounting plate for the rear axle. Technical data Axle: 15 mm Piston diameter: 30 mm OEM part number for comparison purposes 25.03073.009
Available
€226.90
*
NEW
Standard Bremsklötze von EBC. Die Beläge enthalten Aramid Fasern, die 6 mal stärker sind als Stahl und dabei völlig asbestfrei. In der Produktion werden nur schadstoffarme Komponenten verwendet. Die Materialmischungen einschließlich der...
Available
€21.95
*
Brembo offers high-quality replacement brake discs for many Yamaha DT and WR models, which correspond to the original discs in terms of design and quality. They are ideal for demanding road or off-road use and guarantee optimum braking...
Almost gone
€139.90
*
Rear brake disk, Fantic Caballero 125 Bj. 17-20 / E/M 125 Bj.18-20, 220mm, rear end
The brake disc for your Fantic offers you an affordable and reliable brake disc. A perfect braking effect is essential for safety while riding, which is why it is important to replace safety-relevant parts such as the brake disc when...
Out of Stock
€36.95
*
This article is an original spare part from the Beta brand. Incorrect braking action is life-threatening and is often caused by a leaking brake calliper. Replacement is not always absolutely necessary; this practical set can be used to...
Almost gone
€24.95
*
Brake caliper repair kit, 25x27mm for AJP brake
The brake caliper repair kit is specially designed for bikes with AJP disc brake systems and enables cost-efficient repair of the brake system. By replacing worn components, the original braking performance can be restored without having...
Out of Stock
€13.99
*
Brake caliper repair kit, 30x13mm for AJP front brake
The brake caliper repair kit is specially designed for bikes with AJP disc brake systems on the front wheel. This kit enables cost-effective repair of the brake caliper, eliminating the need for a complete replacement and restoring the...
Available
€11.99
*
The brake caliper piston from Beta ensures precise and reliable braking performance. Made from high-quality material, it offers high resistance to heat and wear. Perfect as a spare part for optimum function of your brake system.
Out of Stock
€29.95
*
Wenn es um die Bremsen deines 125er Motorrads geht, dann ist es wichtig, auf Qualität zu setzen. Von zuverlässigen Bremsbelägen bis hin zu robusten Bremsleitungen gibt es eine Vielzahl an Produkten, die für maximale Sicherheit sorgen. Auch Bremszylinder und -scheiben spielen eine wichtige Rolle, wenn es darum geht, dein Bike sicher und zuverlässig zu bremsen. In unserem Shop findest du alles, was du für die Bremsen deines 125er Motorrads brauchst. Von hochwertigen Ersatzteilen bis hin zu modernen Upgrades – wir haben alles, was das Herz begehrt. Mit unseren Produkten kannst du dich auf die Straße und dein Bike verlassen und ein sicheres und unvergessliches Fahrerlebnis genießen.
Viewed