Tip Use our  Bike-Filter to get only suitable articles displayed.
Tip Nutze dein zuletzt gewähltes Bike, um nur passende Artikel angezeigt zu bekommen.
0 Article
 

Brake cylinders & brake lines

Close filters
6 From 7
No results were found for the filter!
Brake cylinder cover Radical CNC Parts
Brake cylinder cover Radical CNC Parts, KTM Duke/RC 125, various colours
Among our handlebar attachments is also a cover for the front brake cylinder. The cover consists of 2 parts, which are connected by the mounting screws. Both parts were CNC-milled and are made of aluminum. The cover is available in 3...

Available

€22.95 *
Brake valve / master brake cylinder
Brake valve / master brake cylinder, Universal, Front, Silver/Aluminium colours
Faulty braking effect is life-threatening and often due to a leaking brake pump. Repair is not always sensible or possible. In many cases there is no way around replacement. With this we offer an inexpensive universal part. Colour:...

Available

€32.95 *
Caliper
Caliper, Rieju Marathon (MRT) 125, rear wheel
Preassembled brake caliper incl. axle carrier and brake pads for Rieju Marathon (MRT) 125 . OEM part number for comparison purposes 0/000.860.5102

Available

€74.95 *
Bolt and dust protection rubber Brake pump
Bolt and dust protection rubber Brake pump, Rieju Marathon (MRT) 125
Bolt and dust protection rubber as spare part for the brake pump of many Aprilia, Derbi, Rieju bikes.

Available

€6.99 *
Brake cylinder cover Radical CNC Parts
Brake cylinder cover Radical CNC Parts, Aprilia RX/SX 125 from year 18 (KXA/B), rear
CNC machined brake cylinder cover, fits on the rear master cylinder of the Aprilia RX & SX models from 2018 up, available in different colours. Delivery without seal! Aprilia OEM Part No.: Part of 2R000490

Available

€14.95 * ; From €5.99 *
Cover cap brake bleeding nipple
Cover cap brake bleeding nipple, different colours, pack of 2
During maintenance work on the brake system, these small parts are often lost. The bleeder nipple can then become clogged and maintenance of the brake system becomes impossible the next time. A cover should therefore always be installed!

Available

€2.99 *
Master brake cylinder
Master brake cylinder, Universal
Faulty braking effect is life-threatening and often due to a leaking brake pump. Repair is not always sensible or possible, in many cases there is no way around replacement. Technical data Distance between the mounting holes: 50 mm...

Available

€19.95 *
Brake valve
Brake valve, universal, front
Universal hand brake cylinder for the front disc brake. The complete fitting is delivered including brake lever and is equipped with a brake light switch. The brake cylinder is ideal for handlebar conversions and/or as an alternative...

Available

€22.95 *
NEW
Entlüfternippel JMC
Entlüfternippel JMC, M8x1.25, versch. Farben
JMC Entlüfternippel M8x1.25 – hochwertiges Ersatzteil zum einfachen Entlüften von Bremsanlagen und hydraulischen Systemen. Gefertigt aus robustem Material und in verschiedenen Farbvarianten erhältlich, sorgt der Entlüfternippel für...

Available

€18.99 *
Brake hose extension Brake hose extension, Universal item, various angles, steel braided, 10 cm, with parts certificate
This steel braided brake hose extension is the clean solution when more hose length is required due to handlebar risers or a handlebar conversion. The original brake hose remains in place and is simply extended by 10 cm . This saves you...

Available

€41.95 *
Brakepump-lever set Brakepump-lever set, Universal, front, without ABE
The universal radial brake pump for the front brake is the ideal solution if you want to significantly increase braking performance while achieving a clean racing look on the cockpit. The combination of brake lever and radial master...

Out of Stock

€78.90 *
Cover for master brake cylinder, Voca
Cover for master brake cylinder, Voca, Universal, for AJP brake cylinders, various colors
The CNC-milled brake cylinder cover from VOCA features precise workmanship and a robust aluminum housing that is significantly more durable than many standard covers. The anodized surface provides reliable protection against corrosion...

Available

€13.99 *
Cover for master brake cylinder Voca
Cover for master brake cylinder Voca, Aprilia RX/SX 125 from model year 18 (KXA/B), rear
CNC-machined brake cylinder cover, fits the rear master brake cylinder of Aprilia RX & SX models from 2018 onwards. The cover is available in different colors. Please note: Delivery does not include a seal! Aprilia OEM part no.:...

Available

€13.99 *
Brake caliper Beta OEM
Brake caliper Beta OEM, Beta RR 125 4T LC from year 07 onwards, rear
Original Beta replacement brake caliper incl. mounting plate for the rear axle. Technical data Axle: 15 mm Piston diameter: 30 mm OEM part number for comparison purposes 25.03073.009

Available

€226.90 *
Brake caliper seal kit Beta OEM
Brake caliper seal kit Beta OEM, Beta RR 125 ab Bj. 21, 30mm
This article is an original spare part from the Beta brand. Incorrect braking action is life-threatening and is often caused by a leaking brake calliper. Replacement is not always absolutely necessary; this practical set can be used to...

Almost gone

€24.95 *
Brake caliper piston Beta OEM
Brake caliper piston Beta OEM, Beta RR 125 ab Bj. 21, 30mm
The brake caliper piston from Beta ensures precise and reliable braking performance. Made from high-quality material, it offers high resistance to heat and wear. Perfect as a spare part for optimum function of your brake system.

Out of Stock

€29.95 *
Brake caliper Motoforce 4-piston Brake caliper Motoforce 4-piston, universal, various colors Colors, CNC milled, anodized
The 4-piston brake caliper from Motoforce Racing not only offers improved braking performance, but also an attractive design with various anodized finishes. The focus is on increasing performance at reasonable prices. Equipped with 4...

Available

€64.95 *
Master brake cylinder Voca
Master brake cylinder Voca, universal, various colors Colors, CNC milled
The brake pump from Voca Racing is perfect for 4-piston brake calipers and offers a precise and controllable braking feel. This improves the braking performance, shortens the braking distance and makes the handling sportier. It is...

Out of Stock

€69.90 *
Brake cylinder Most Brake cylinder Most, universal, 22mm, front, versch. Colors
MOST Racing hereby offers a radial CNC brake cylinder anodized in your favorite color! The assembly is very easy and fits all 22mm handlebars. Technical data: Type 3 or 4 fingers Adjustable Breakage protection Piston diameter 17.5 For...

Almost gone

€99.95 *
Brake caliper Brake caliper, Derbi Senda Bj. 04-16, front
This article is a cheap alternative to the expensive original spare part. The brake caliper corresponds to the original in dimensions and function. Technical data Distance of the mounting holes: 67 mm Piston diameter: 25 mm Type: 09

Almost gone

€449.90 *
Brake fitting/ master cylinder Brake fitting/ master cylinder, universal, 22mm, versch. Colors
Technical data: Mirror mount M10 x 1.25 right-hand thread 17,5mm piston for 22mm handlebar Banjo bolt M10x1,25 for brake line external reservoir Lever travel adjustable

Available

€89.95 * ; From €71.96 *
Stahlflex Bremsschlauch Stahlflex Bremsschlauch, rot, 120cm, universell
Diese Bremszüge können farblich passend zum rest eures Bikes in Rot bestellt werden. Die Anschlüsse haben einen Innnendurchmesser von 10mm, der Zug eine Gesamtlänge von 120cm.

Almost gone

€17.90 *
Ring spring/tension spring Brake pedal Rieju OEM
Ring spring/tension spring Brake pedal Rieju OEM, Rieju Marathon (MRT) 125
Here we offer the ring spring which returns the brake pedal to its original position. OEM part number for comparison purposes 0/000.470.5011

Available

€10.99 *
Brake fluid reservoir Brake fluid reservoir, universell, rot
Herewith we offer you a cheap brake fluid reservoir with stylish red CNC parts. The lid comes directly incl. seal, clamps and hose (10cm). Lid, mounting and screw cover are anodized red. In addition, the tank has the typical level...

Available

€10.99 *
6 From 7

Suchst du nach hochwertigen Ersatzteilen oder optischen Upgrades für dein 125er Motorrad? Dann bist du bei uns genau richtig! Wir bieten eine große Auswahl an BREMSZYLINDERN und BREMSLEITUNGEN, die für eine verbesserte Leistung und Optik deines Bikes sorgen werden.

Unsere BREMSZYLINDER sind aus hochwertigen Materialien gefertigt und garantieren eine zuverlässige Bremsleistung, während unsere BREMSLEITUNGEN für eine verbesserte Bremsrespons und -fühlbarkeit sorgen.

Neben ihren praktischen Vorteilen, bieten unsere BREMSZYLINDER und BREMSLEITUNGEN auch optische Upgrades für das Aussehen deines Motorrads. Wir haben eine Vielzahl von Designs und Farben zur Auswahl, damit du dein Bike ganz nach deinen Wünschen gestalten können.

Überzeug dich selbst und schau jetzt unser Angebot an BREMSZYLINDERN und BREMSLEITUNGEN für 125er Motorräder an. Wir sind sicher, dass du etwas finden wirst, das perfekt zu deinem Bike passt.

Viewed