Tip Use our  Bike-Filter to get only suitable articles displayed.
0 Article
 

Fork & Shock absorber

Close filters
3 From 4
No results were found for the filter!
Rate of increase TRW
Rate of increase TRW, Kawasaki Z 125
This elevation kit offers larger riders an easy way to adopt a more comfortable seating position. But also normal sized riders can benefit from a heightening kit. As the rear end is raised, the geometry of the chassis changes. Many...

Almost gone

€102.90 * ; €61.95 *
Forked seal ring set Athena
Forked seal ring set Athena, Yamaha WR 125, MT-07 (RM04), MT-09 (RN29)
Simmerring set Athena, these are of higher quality than the OEM seals and guarantee a remarkable performance and resistance to high temperatures and abrasion. outer rubber, double sealing lip Suitable for Showa forks with 41mm...

Available

€16.39 *
Lowering kit
Lowering kit, Yamaha YZF-R / MT 125 year 14-18 (RE11, RE29), with ABE
With these levers the rear of the Yamaha MT, or YZF-R 125 can be lowered a few centimeters. This makes it easier for smaller riders to get on and off the bike. However, due to the installation of the lowering system, it is often not...

Out of Stock

€124.95 *
Shock absorber Mono YSS
Shock absorber Mono YSS, Aprilia RS 125 until 2005
Aprilia RS125 2-stroke models have, apart from the often criticized Lifetime the cylinder / piston Combination another great Problem which concerns the original Sachs rear shock absorber. Especially with increasing age this shock...

Available

€219.00 *
Dust caps fork JMP
Dust caps fork JMP, Beta RR 125 year 14-, KTM SX / EXC 125 / Duke 690 from year 08
Dust caps protect the fork seals from dust and coarse dirt, which extends the service life of the fork seals accordingly. Technical data 48x58.5x6/11.5

Almost gone

€31.50 *
Dust caps fork Dust caps fork, Yamaha WR 125, MT07 (RM04), 41x53.5x12mm
Dust caps protect the fork seals from dust and coarse dirt, which extends the service life of the fork seals accordingly.

Available

€24.90 *
Fork seal rings Athena
Fork seal rings Athena, KTM Duke / RC 125 up to model year 16, 43x52.9x9/11,4mm
Quality radial shaft seals from Athena, suitable for KTM Duke 125, 200 and 390 models, as well as KTM RC 125, 200 & 390 up to model year 2017. One set is delivered. Dimensions: 43x52.9x9/11.4 mm

Available

€14.99 *
dust caps fork Athena
dust caps fork Athena, KTM Duke / RC 125 up to model year 16, 43x53.4x5.8/13 mm
Dust caps, as the name suggests, protect the fork seal rings from dust and coarse dirt. In this way they ensure that forked shaft seals last as long as possible. If the Simmerrings are defective and leaky, the dust protection should be...

Available

€10.59 *
Steering head bearing set Steering head bearing set, Yamaha MT, YZF-R 125 up to year 2018
The steering head bearing is thoroughly checked during the technical inspection of the vehicle. If it is worn out or slightly jammed, the motorcycle will not get a new sticker. The only remedy is to replace the bearing.

Available

€50.95 *
Lowering kit TRW
Lowering kit TRW, KTM Duke 125 year 11-16, KTM RC 125 year 14-16, with ABE
With the TRW-Lucas rear lowering there is a cost-effective way to reduce the seat height. On most models this is achieved by changing the linkage of the shock absorber. The installation in a specialist workshop is recommendable,...

Available

€179.94 *
Steering head bearing set JMP
Steering head bearing set JMP, Honda CBR 125 from year 05 (JC34, 39, 50), CBF 125 year 09-16 (JC40), NSR 125 year...
The steering head bearing is carefully checked during the technical inspection of the vehicle. If it is worn out or slightly jammed, the motorcycle will not get a new sticker. The only remedy is to replace the bearing.

Almost gone

€39.95 *
Steering head bearing set Steering head bearing set, Yamaha YBR 125
The steering head bearing is thoroughly checked during the technical inspection of the vehicle. If it is worn out or slightly jammed, the motorcycle will not get a new sticker. The only remedy is to replace the bearing.

Available

€13.99 *
Suspension strut Yamaha
Suspension strut Yamaha, YZF-R/MT 125, from year 14
A worn rear leg can be noticed quite quickly, even if the rear swings when tilting in curves. In addition, a leak at the upper oil ring is often visible, which spreads oil over a large area on the swingarm and possibly even on the rear...

Almost gone

€288.90 * ; €139.90 *
Steering head bearing set Steering head bearing set, Yamaha DT 125 RE/X
Manufactured by Koyo, one of Japan's leading bearing manufacturers. Worldwide original equipment manufacturer, high quality, 100% Made in Japan. - With dust seal Dimensions of the bearings: - Upper bearing: 47X25X15 - Lower bearing:...

Almost gone

€29.90 *
Steering head bearing set Rieju OEM
Steering head bearing set Rieju OEM, Rieju Marathon (MRT) 125
Replacement steering head bearing set for almost all Rieju models. Type: Taper roller bearing OEM part number for comparison ticks: 0/000.960.0200

Available

€13.99 *
Steering head bearing Piaggio OEM
Steering head bearing Piaggio OEM, Aprilia SX 125 from year 18
Aprilia or Piaggio original spare part, bearing designation SKF: 6205 25x52x15 OEM part number for comparison purposes 00000056205

Available

€9.99 *
Fork-type bellows Polisport
Fork-type bellows Polisport, universal, different colours
Protects the fork from stone chips, dirt and moisture. Available in 3 colours. Technical data length: 350mm width top: 32mm width bottom: 58mm 28 shafts

Available

€16.99 *
Rieju OEM upper triple tree
Rieju OEM upper triple tree, Rieju Marathon 125 Year of construction 12-17
Rieju original spare part. Fits almost all MRT models from year 09 (except MRT Pro with upside-down fork) OEM part number for comparison purposes Rieju: 0/000.660.6008

Almost gone

€145.90 *
Upside Down Fork Rieju OEM
Upside Down Fork Rieju OEM, Rieju Marathon LC 125
Complete upside-down sports fork from Rieju. The fork is used as a standard fork on the Pro models and can be used for both rim types (spoke or cast). The brake is designed for a disk diameter of 300mm. The matching 300mm brake disk for...

Almost gone

€925.90 *
Lower triple clamp OEM
Lower triple clamp OEM, Rieju Marathon (MRT) 125, incl. steering head bearing
Slightly cheaper alternative compared to the replacement of the complete fork. A matching steering head bearing is included. Notes We do not stock this item. This means that the item will be ordered by us directly from the supplier after...

Available

€219.90 *
Handlebar piece Yamaha OEM
Handlebar piece Yamaha OEM, Yamaha YZFR 125 Bj. 14-18, right
This item is an original spare part (OEM) of the brand Yamaha. OEM part number for comparison purposes 5D7F61222000 Scope of delivery: 1 pc. for right side

Available

€84.95 *
Fork OEM
Fork OEM, Rieju Marathon (MRT) 125, including steering head bearing
The fork is of course one of the most important parts of the chassis. In an accident it can happen quickly that the handlebars or triple clamps bend and the handling of the moped is negatively affected. We can offer an original Rieju...

Available

€399.90 *
Thru axle set Rieju OEM
Thru axle set Rieju OEM, Rieju Marathon (MRT) 125
Technical data total length: 235mm diameter wheel bearing: 15mm diameter shaft: 20mm Shaft length: 59mm Thread: M14 Thread length: 21mm width spacer: 21mm Outer diameter spacer: 25mm Scope of delivery Thru axle Self-locking nut Spacer

Almost gone

€53.95 *
Fork immersion tube Rieju OEM
Fork immersion tube Rieju OEM, Rieju Marathon (MRT) 125
In case of damage such as stone chips, it is essential to replace the immersion tube. This is because even the strongest oil scraper ring will lose oil at some point due to unevenness in the bare sealing surface. As a result, the damping...

Available

€104.95 *
3 From 4

Gabel und Stossdämpfer sind wichtige Komponenten jedes 125ccm Motorrads. Sie tragen dazu bei, die Fahrsicherheit zu erhöhen und das Fahrgefühl zu verbessern. In unserem Shop bieten wir original Ersatzteile, Dichtungen und Tieferlegungen für Gabel und Stossdämpfer von 125er Motorrädern an.

Unsere hochwertigen Ersatzteile sorgen dafür, dass dein Motorrad immer in Top-Zustand bleibt und du sicher unterwegs bist. Auch wenn du dein Bike optisch aufwerten möchtest, bieten wir Tieferlegungen an, die nicht nur cool aussehen, sondern auch das Handling verbessern.

Besuche unseren Shop und entdecke unsere große Auswahl an Gabel- und Stossdämpfer

Wer ein 125er Motorrad fährt, weiß wie wichtig eine gute Gabel und ein zuverlässiger Stossdämpfer sind. Sie sorgen nicht nur für mehr Fahrkomfort, sondern auch für mehr Sicherheit und Stabilität bei jeder Fahrt. Deshalb bieten wir in unserem Shop eine große Auswahl an Gabeln und Stossdämpfern für 125er Motorräder von renommierten Marken wie Yamaha, Honda und Suzuki.

Aber wir wissen auch, dass junge Motorradfahrer oft auf der Suche nach individuellen, einzigartigen Teilen sind, um ihr Bike aufzuwerten und es von der Masse abzuheben. Deshalb haben wir auch eine Reihe von speziellen Gabeln und Stossdämpfern im Angebot, die nicht nur leistungsstark sind, sondern auch ein cooles Design haben.

Überzeuge dich selbst von der Qualität unserer Gabeln und Stossdämpfer und schau in unserem Shop vorbei. Wir sind sicher, dass du das perfekte Teil für dein 125er Motorrad finden wirst.

Viewed