Tip Use our  Bike-Filter to get only suitable articles displayed.
0 Article
 

Clutch

Close filters
3 From 3
No results were found for the filter!
Clutch springs TRW
Clutch springs TRW, Rotax 122/123 (Aprilia RS 125 / SX 125), 6 pieces, reinforced
TRW-Lucas clutch springs 10% harder than the original springs. Delivery as complete set.

Available

€19.99 *
Clutch springs EBC Racing
Clutch springs EBC Racing, KTM Duke / RC 125 / 390
Reinforced clutch springs from EBC, 10% harder than the original springs. Provides relief for slipping clutches by increasing performance.

Almost gone

€15.50 *
Clutch springs TRW
Clutch springs TRW, Yamaha YI-3(4) engine (Yamaha MT /YZF-R 125, WR 125 (DE07), 4 pieces, 10% reinforced
10% harder clutch springs from TRW-Lucas. The increased pressure on the clutch plate prevents the clutch from slipping. Delivery as set consisting of 4 pcs.

Available

€14.90 *
Clutch springs TRW
Clutch springs TRW, Yamaha DT 125, reinforced +10%, 5 pieces
10% harder clutch springs from TRW-Lucas. The increased pressure on the clutch plate prevents the clutch from slipping. Delivery as a set consisting of 5 pcs.

Almost gone

€17.50 *
Clutch springs EBC
Clutch springs EBC, Honda KPP E1 4T engine (CBR 125, CB 125 R), 4 pieces, reinforced
EBC clutch springs, 10% harder than the original springs. Supplied as a complete set (4pcs).

Almost gone

€15.50 *
Clutch disc set EBC
Clutch disc set EBC, Yamaha MT/YZF-R 125 year 14-17 (RE11/RE29) , Honda CBF 125 (JC40)
The EBC CK standard clutch plates correspond to the original plates in dimension and quantity. The lining material is cork based with a high aluminium content to reduce wear and fading to a minimum. The highly compressed material...

Available

€30.95 *
Clutch springs EBC
Clutch springs EBC, Yamaha YI-3 from 2014 onwards (MT/YZF-R125 RE11/29, Beta RR, HM Moto, Rieju RS3)
Reinforced clutch springs from EBC, 10% harder than the original springs. Shank remedy for slipping clutches by increasing performance.

Available

€15.50 *
Clutch discs EBC Racing Carbon
Clutch discs EBC Racing Carbon, Yamaha MT/YZF-R 125 year 14-17 (RE11/RE29) , Honda CBF 125 (JC40)
To ensure that the clutch discs can withstand the high stresses and temperatures of racing, these pads are made of carbon fibre. Wear and fading are reduced to a minimum and even under extreme loads the material prevents the pads from...

Out of Stock

€60.95 *
Clutch disc set EBC
Clutch disc set EBC, Yamaha YI-3 engine (cars until 2014)
Cork-based product, impregnated with aluminium particles to increase durability and heat resistance. The material is highly compacted to avoid swelling. The CK series clutch kits contain a complete set of friction linings and are...

Available

€37.95 *
Clutch springs EBC reinforced
Clutch springs EBC reinforced, Yamaha YI-3 engine, YZF-R125 RE06 up to year 13, WR125 DE07 up to year 14
Features Increased compression force of 10 to 15% compared to standard springs Reduction of clutch slippage Made of heat-treated carbon steel

Available

€13.99 *
Clutch facings Newfren Standard
Clutch facings Newfren Standard, Rotax 122
Newfren offers a wide range of brake spare parts as well as clutch pads in different qualities. The cork pads offered here are well comparable with the original pad plates. But according to Newfren they should last a bit longer than the...

Out of Stock

€64.95 *
Clutch facings Newfren Racing
Clutch facings Newfren Racing, Rotax 122
In addition to the standard cork clutch facings, Newfren can also offer you a reinforced carbon kit. The special carbon mixture makes the clutch plates much more grippy! This makes it impossible for the clutch to slip even with heavily...

Out of Stock

€84.95 *
Clutch facings Newfren Standard
Clutch facings Newfren Standard, Honda KPP E1 engine (CBR 125, CB 125 R), without cut-off wheels
Lightly reinforced replacement clutch from Newfren. The clutch has been made a bit more grippy by a slightly improved formula and should therefore be a bit more durable than the original clutch facings. Only the friction discs are...

Almost gone

€32.95 *
Clutch hub lock washer Piaggio OEM
Clutch hub lock washer Piaggio OEM, Aprilia(Piaggio) M545 / Rotax 122/123 Motoren
This article is an original product of the Piaggio brand OEM number for comparison purposes : 876418

Available

€3.99 *
Quickshifter UMA
Quickshifter UMA, Universell
Improve your motorcycle experience with the Uma Racing quick shift lever. This innovative accessory allows you to shift gears without the need for the clutch, while protecting your motorcycle transmission. Installation is as easy as can...

Almost gone

€259.90 *
Clutch pressure plate / primary drive Piaggio OEM
Clutch pressure plate / primary drive Piaggio OEM, Piaggio/Aprilia M545 Motor
Original spare part from Piaggio. Fits Clutch pressure plate / primary drive Piaggio OEM, Piaggio/Aprilia M545 engine OEM part number for comparison 847046, ODN00H02600181

Almost gone

€69.95 *
Clutch pressure plate Piaggio OEM
Clutch pressure plate Piaggio OEM, Piaggio/Aprilia M545 Motor
Replacement clutch drum for Piaggio/Aprilia M545 engine. OEM part number for comparison 847045, 00H02600111, ODN00H02600111

Almost gone

€119.90 *
Sicherungsscheibe Kupplungskorb Piaggio OEM
Sicherungsscheibe Kupplungskorb Piaggio OEM, Aprilia(Piaggio) M545 / Rotax 122/123 Motoren
Diese Scheibe sichert die Befestigungsmutter des Kupplungskorbes von Derbi/Aprilia Motoren. Bei oft anstehenden Wartungen und Arbeiten ermüdet die Scheibe irgendwann und wird ggf. brechen. Da hilft dann nur noch ein Austausch der Scheibe.

Available

€3.99 *
3 From 3

Wenn es darum geht, die Leistung deines 125er Motorrads zu verbessern, ist die Kupplung ein wichtiges Element, das nicht vernachlässigt werden sollte. Eine gut funktionierende Kupplung ist entscheidend für eine reibungslose Fahrt und kann auch dazu beitragen, den Verschleiß anderer Komponenten zu verringern. Tuning oder Ersatz der Kupplung kann daher eine lohnende Investition sein.

Eines der wichtigsten Dinge, die du beim Ersetzen der Kupplung beachten solltest, ist, dass du hochwertige Teile verwendest. Billige Ersatzteile können schnell brechen und zu teuren Reparaturen führen. Stelle sicher, dass du deine Teile von einem vertrauenswürdigen Anbieter beziehst, um sicherzustellen, dass Sie die beste Qualität erhalten.

Eine andere wichtige Überlegung bei der Wahl von Tuning- oder Ersatzteilen ist, ob sie mit deinem Motorrad kompatibel sind. Stell sicher, dass die Teile, die du auswählst, für dein spezifisches 125er Bike geeignet sind. Andernfalls können sie nicht richtig funktionieren und möglicherweise sogar zu Schäden am Motor führen.

Wenn du dir unsicher bist, ob Tuning oder Ersatz der Kupplung für dein Motorrad das Richtige ist, wende dich gerne an uns oder einen professionellen Mechaniker.

Insgesamt ist das Ersetzen der Kupplung eine großartige Möglichkeit, um die Leistung deiner 125er zu verbessern. Stelle jedoch sicher, dass Sie hochwertige Teile von einem vertrauenswürdigen Anbieter verwenden und dass sie kompatibel mit deinem Motorrad sind.

Viewed