1. Choose model
RS3 125 (2011 bis 2016)
No results were found for the filter!
Fits 28.5mm handlebars. The handlebar is quite flat on this version. Of course, there is also the matching intake or the matching adapter for the standard 22mm handlebar mounts. The intake is completely CNC machined and anodized...
Available
€29.95
*
Vibration dampers are actually used to reduce vibrations in the steering tube, since these vibrations occur only very slightly on most 125s anyway, it is not necessary to design vibration dampers as absorber weights. Here we can offer...
Available
€17.99
*
;
€12.99
*
CNC machined brake fluid reservoir from Motoflow. Available in different colors.
Available
€19.95
*
Spare footrest pair from Radical. Can be mounted on Radical Racing footrest adapters. Note Delivery WITHOUT footrest adapter!
Available
€22.95
*
Stand mounts are used to use motorcycle paddock stands with claw mounts. The stand holders are 2-part black and orange anodized.
Available
€12.90
*
Simple CNC milled styling part for KTM Duke or RC 125, the screw is located at the top of the clutch housing. Great optical effect for a small budget!
Available
€13.99
*
For Yamaha 125cc YI-3-, as well as Kawasaki 125cc- and Honda KPP 125cc 4-stroke engines, we also offer an attractively designed oil filler plug. The screw is CNC milled and completely made of one piece of aluminium. It is available in...
Available
€15.90
*
;
€9.90
*
As a little gimmick we can offer a CNC manufactured adjusting screw for e.g. clutch cables. The adjusting screw fits on all vehicles with M8 adjusting device.
Almost gone
€12.95
*
NEW
Hier haben wir neue Lenkerenden von Puig, den SPEED. Aus einem Aluminiumblock gefräst und in sieben verschiedenen Farben für euch zur auswahl. Das Design verbindet die Einfachheit der Linien und den Minimalismus des Renn Charakters mit...
Available
€29.95
*
NEW
Hier haben wir neue Lenkerenden von Puig, den SHORTY. Aus einem Aluminiumblock gefräst und in sieben verschiedenen Farben für euch zur auswahl. Das Design verbindet die Einfachheit der Linien und den Minimalismus des Renn Charakters....
Available
€29.95
*
This headlight bracket is an essential part for mounting the universal LED headlight from Puig. It is made of high-quality CNC-milled aluminum and is therefore very robust and durable. In black, it matches the headlight very well and...
Almost gone
From €145.90
*
Universal lever guard from VOCA Racing. This type of lever guards is mandatory for safety reasons in MotoGP and other categories of the world of motorcycling. They are 100% recommended for racing, but can also be used on the road. They...
Available
€69.95
*
The lever protection set serves to protect the lever from breaking or bending when falling. The set is made of sturdy aluminum and therefore provides effective protection against falls.
Out of Stock
€44.95
*
Brake cylinder Most, universal, 22mm, front, versch. Colors
MOST Racing hereby offers a radial CNC brake cylinder anodized in your favorite color! The assembly is very easy and fits all 22mm handlebars. Technical data: Type 3 or 4 fingers Adjustable Breakage protection Piston diameter 17.5 For...
Available
€99.95
*
This item is an original Yamaha brand. A set contains 2 valve caps for each Schrader valve. Anodized finish for durability.
Available
€7.99
*
Brake fitting/ master cylinder, universal, 22mm, versch. Colors
Technical data: Mirror mount M10 x 1.25 right-hand thread 17,5mm piston for 22mm handlebar Banjo bolt M10x1,25 for brake line external reservoir Lever travel adjustable
Available
€89.95
*
Blackway is a French brand known for its high quality styles. The Diabolos are extensions that are attached to the rear of the bike to create an optimal mount for assembly stands.
Available
€9.99
*
Renthal is one of the leading brands when it comes to quality handlebar components for enduro and supermoto bikes! We are pleased to offer you Renthal products in our store. These are CNC machined handlebar clamps with 0mm offset for...
Available
€89.90
*
Blackway is a French brand known for its high quality styles. The Diabolos are extensions that are attached to the rear of the bike to create an optimal mount for assembly stands.
Available
€9.99
*
CNC handlebar brace, red, 22mm
This inexpensive and adjustable handlebar brace (225mm - 255mm) serves the stability of the handlebar and minimizes vibrations significantly. It fits Stadard handlebars with 22mm diameter and comes directly with an allen to adjust the...
Out of Stock
€19.99
*
Brake fluid reservoir, universell, rot
Herewith we offer you a cheap brake fluid reservoir with stylish red CNC parts. The lid comes directly incl. seal, clamps and hose (10cm). Lid, mounting and screw cover are anodized red. In addition, the tank has the typical level...
Out of Stock
€10.99
*
Cover master brake cylinder Most, Universal, various colors
To protect against stone chips, or as a simple styling part Most offers here a protective cover for the brake cylinder, on the rear footrest. The cover is largely universal fit through the sleeves and slotted holes. Nevertheless, it may...
Out of Stock
€29.95
*
Brake fluid reservoir, Universal, CNC milled
CNC milled brake fluid reservoir incl. handlebar mount. Available in different colours.
Almost gone
€18.90
*
MTKT offers a complete set, consisting of brake lever armature and clutch lever armature. A master brake cylinder for hydraulic brakes is also included. The individual parts of the set are mostly CNC milled and have an extremely...
Almost gone
€199.00
*
With CNC parts you have the opportunity to create with minimal effort an individual look to your Rieju RS3 125 to create. Parts like, Öleinfüllschrauben, brake cylinder cover, chain protector or even sprocket cover & motorcycle covers from CNC are mounted or replaced in a few minutes. Even more the parts, compared with a tuning exhaust system or a größeren cubic kit, significantly cheaper.
Apart from the erwähnten points CNC optics parts offer a much higher quality appearance than the Standard parts of the RS3 125. We ourselves offer our own parts from Radical Racing only after strict quality control. quality control. So in addition to fit and visual impact, we also check function! For example the brake cylinder covers have a hole to prevent a vacuum in the reservoir, just like the original cover. can arise.
In addition, there are also a variety of different colors, so you also the right CNC parts matching the color of your motorcycle have.
Viewed