No results were found for the filter!
The color selection was matched exactly to the 28.6mm cross handlebars from Stage6 range! The clamps fit but also on other 28mm handlebars. The handlebar clamps are CNC machined and anodized in color, with lasered logo on the top (2...
Available
€45.95
*
;
From €36.76
*
Mirror image, various colours
This mirror mount allows you to mount all mirrors with M8 thread on downhill handlebars or generally on handlebars where this mount is not available. Inner diameter: 22mm
Available
From €10.99
*
NEW
Die VOCA EVO Hebelprotektoren wurden für den sportlichen Einsatz entwickelt und bieten zusätzlichen Schutz für Brems- oder Kupplungshebel. Sie verhindern, dass der Hebel bei Kontakt mit anderen Fahrern oder Hindernissen unbeabsichtigt...
Available
€52.95
*
NEW
Mit dem eloxierten Schraubenset von Puig verleihst du deiner Cockpitscheibe eine individuelle Optik und ersetzt gleichzeitig die serienmäßigen Befestigungsschrauben durch hochwertige Aluminium-Komponenten. Die Schrauben und Muttern...
Available
€5.99
*
Die Spiegel Gewinde Abdeckschrauben M10 x 1,25 dienen zur sauberen und sicheren Abdeckung der originalen Spiegelgewinde am Lenker, insbesondere bei der Verwendung von Lenkerendenspiegeln. Gefertigt aus hochwertigem CNC-gefrästem...
Available
€10.99
*
Die Raximo Ventilkappen aus Aluminium sind eine einfache Möglichkeit, die Optik deiner Räder aufzuwerten, ohne in die Technik einzugreifen. Sie werden direkt auf das Ventil geschraubt und ersetzen die serienmäßigen Kunststoffkappen. Dank...
Available
€6.99
*
Adjustment screw for clutch cable, Various colors, 30 mm, M10, CNC aluminum
The CNC-milled aluminum clutch adjustment screw allows you to adjust your clutch cable quickly and precisely. The large adjustment wheel allows you to adjust the clutch play cleanly and in a controlled manner – even on the road without...
Available
€7.99
*
License plate light Sixty6, Universal items, various colors, with E number, CNC aluminum
The LED mini license plate light from SIXTY6 is a particularly compact solution for a clean rear end. Made from CNC-milled aluminum , it impresses with its precise workmanship and minimalist design. Despite its extremely small...
Available
€34.95
*
This footrest extension for FRS and FRS2 footrests gives you more freedom in your seating position – without any DIY solutions. The CNC-milled multi-angle positioner allows you to move the footrest 25 mm in all directions . This allows...
Out of Stock
€29.95
*
The RAXIMO LED Mini license plate light impresses with its very compact design and clean workmanship. The CNC-milled aluminum housing ensures a high-quality look and fits discreetly on almost any rear end. The modern LED technology with...
Available
€34.95
*
The CNC-milled footrest set from Voca impresses with its precise manufacturing and high-quality anodization. The anodization creates particularly deep colors that make your moped shine and add a striking accent. The precisely machined...
Available
€49.95
*
The CNC-milled brake cylinder cover from VOCA features precise workmanship and a robust aluminum housing that is significantly more durable than many standard covers. The anodized surface provides reliable protection against corrosion...
Available
€13.99
*
CNC-machined brake cylinder cover, fits the rear master brake cylinder of Aprilia RX & SX models from 2018 onwards. The cover is available in different colors. Please note: Delivery does not include a seal! Aprilia OEM part no.:...
Available
€13.99
*
Complete your handlebars! VOCA EVO weights not only add style, but also calm to the cockpit. The anodized aluminum dampens vibrations, protects the handlebar ends, and gives your moped or motorcycle a clean racing look. Installation is...
Available
€14.99
*
The VOCA Bestia CNC throttle grip 90° is one of the most exclusive and precise throttle grips on the market – made for those who refuse to compromise when it comes to their machine. The housing is CNC-milled from a single piece of...
Available
€65.95
*
More control, better feel and a really stylish look - with the original Fantic Racing CNC lever set for brake and clutch, you can noticeably upgrade your bike. Made from high-quality CNC-milled aluminum, the levers not only offer maximum...
Out of Stock
€109.90
*
STR8 footrests, Various colors, Rieju Marathon (MRT) 125, rider
These high-quality footrests made of anodized CNC-milled aluminum not only offer an attractive appearance, but also functional advantages for the passenger. These footrests are the ideal choice for riders who value quality, safety, and...
Available
€59.95
*
Footrests STR8, various colors Colors, Rieju Marathon (MRT) 125, pillion
These high-quality footrests made of anodized CNC-milled aluminium not only offer an attractive appearance, but also functional benefits for the passenger. These footrests are the ideal choice for riders who value quality, safety and...
Available
€57.95
*
Cladding screw set, universal, various colors Colors, M6x20, 10 pieces
Scope of delivery: 10x M6x20 screw 10x color anodized washer
Available
€7.99
*
Short-stroke throttle grip CNC Type, universal for 22mm handlebars, different colors
Short-stroke throttle grip made of aluminium, anodized in various colors. Suitable for standard motorcycle handlebars with 22 mm diameter.
Available
€42.95
*
The VOCA Bestia CNC Flow Cooler is a high-quality flow cooler that has been specially developed for powerful 2-stroke engines. It optimizes cooling performance and ensures effective temperature control, especially for tuned or heavily...
Available
€25.95
*
The VOCA CNC handlebar clamp is the perfect choice for anyone who values precision, stability and an aggressive racing design. Manufactured from high-quality CNC-milled aluminum, this handlebar clamp not only ensures a first-class look,...
Available
€44.95
*
The footrest extension from Movetronix gives your passenger the opportunity for a more relaxed ride. The footrest extension is clamped to the footrest and therefore offers more space for the pillion rider's foot. The extension is made of...
Available
€129.90
*
Mirror thread cover caps, black, for M10 thread, CNC milled
Cover for threads of the original mirrors, if you install handlebar end mirrors on your motorcycle, the existing mounts remain unused. With this aluminum cover for M10 threads, you can discreetly conceal them.
Available
€10.99
*
With CNC parts you have the opportunity to create with minimal effort an individual look to your Sherco SE 125 2 Takt to create. Parts like, Öleinfüllschrauben, brake cylinder cover, chain protector or even sprocket cover & motorcycle covers from CNC are mounted or replaced in a few minutes. Even more the parts, compared with a tuning exhaust system or a größeren cubic kit, significantly cheaper.
Apart from the erwähnten points CNC optics parts offer a much higher quality appearance than the Standard parts of the SE 125 2 Takt. We ourselves offer our own parts from Radical Racing only after strict quality control. quality control. So in addition to fit and visual impact, we also check function! For example the brake cylinder covers have a hole to prevent a vacuum in the reservoir, just like the original cover. can arise.
In addition, there are also a variety of different colors, so you also the right CNC parts matching the color of your motorcycle have.
Viewed