No results were found for the filter!
For 125cc Suzuki engines we have here an attractively designed oil filler plug in the offer. The screw is CNC milled and completely made of one piece of aluminium. It is available in different colours. Technical data Thread: M19x1 Thread...
Available
€10.99
*
;
From €5.99
*
From Radical Racing we can offer different color anodized aluminum footrests. The footrests are simply exchanged against the originals. The assembly can be done within about 10 minutes and is quite simple. The footrests are delivered...
Available
€39.95
*
Footrest adapter from Radical Racing. Suitable for Kawasaki Ninja or Z 125. Note Here it concerns only the adapters, as spare part! Footrests are not supplied!
Available
€29.95
*
;
€18.90
*
Footrest adapter from Radical Racing. Suitable for Honda CB 125 R from 2018. Note Here it concerns only the adapters, as spare part! Footrests are not supplied!
Available
€22.95
*
From Radical Racing we can offer different color anodized aluminum footrests. The footrests are simply exchanged against the originals. The assembly can be done within about 10 minutes and is quite simple. The footrests are delivered...
Available
€36.95
*
Footrest adapter pair from Radical Racing. These adapters allow Radical footrests to be attached to the vehicle. Suitable for all KTM Duke & RC models from 2011. Scope of delivery 1 pair of footrest adapters Mounting screws Footrests are...
Available
€22.95
*
From Radical Racing we can offer different color anodized aluminum footrests. The footrests are simply exchanged against the originals. The assembly can be done within about 10 minutes and is quite simple. The footrests are delivered...
Available
€39.95
*
From Radical Racing we can offer different color anodized aluminum footrests. The footrests are simply exchanged against the originals. The assembly can be done within about 10 minutes and is quite simple. The footrests are delivered...
Available
€39.95
*
Footrest adapter from Radical Racing. Suitable for Yamaha YZF-R 125 & MT 125. Note Here are only the adapters, as spare part! There are no footrests included!
Available
€22.95
*
These swingarm sliders can be mounted on the swingarm of the KTM Duke and protect the swingarm in case of a fall at particularly vulnerable points.
Available
€20.95
*
Styling adapter plate for the vehicle stand made of CNC milled aluminium. Anodized in black and orange and therefore perfectly matched to your KTM Duke! Easy mounting and quick optical upgrading. In addition, the footprint is increased...
Available
€21.95
*
Shift- and foot brake lever set from Motoflow, suitable for KTM Duke 125. Both levers are milled from aluminium and anodized in two colours. This makes them the perfect eyecatcher on the KTM Duke.
Available
€41.95
*
Tired of the boring brake fluid cover? No problem! We offer you here a fat CNC milled, of course optically embellished cover! The cover itself consists of two parts, which are connected by a small, already premounted stainless steel...
Available
€12.95
*
The Radical CNC brake levers already known and very popular from the KTM Duke 125 are now also available for the Yamaha YZF-R 125 (year of manufacture 2014). Compared to the KTM levers, we have of course adapted the available colour...
Available
€59.90
*
;
€47.95
*
For Yamaha 125cc YI-3-, as well as Kawasaki 125cc- and Honda KPP 125cc 4-stroke engines, we also offer an attractively designed oil filler plug. The screw is CNC milled and completely made of one piece of aluminium. It is available in...
Available
€15.90
*
;
From €6.99
*
For the front brake cylinder of nearly all Yamaha 125s (YZF-R125, MT 125 & WR 125), we can offer a much nicer version of the front brake cylinder cover. The cover consists of two parts, whereby the upper part of the cover can be selected...
Available
€19.90
*
;
From €8.99
*
CNC milled cover of the water tank incl. seal. Anodized orange. Dimensions thread: 21mm height: 16mm Outside diameter: 22mm
Available
€15.95
*
Cheap part that will attract a lot of attention. This screw cap is suitable for the rear brake fluid reservoir of the KTM Duke 125, or the front reservoir of the Aprilia RS 125 and can be fitted in less than a minute. Note: The seal of...
Available
€18.95
*
;
From €9.99
*
Here we have an oil filler plug for you, which you can easily exchange for the boring original from KTM. The assembly is of course very simple: old out, new in. You won't even need tools. The screw consists of two individual parts,...
Available
€14.99
*
;
From €10.99
*
Here we offer hand levers in a slightly shortened "Shorty" version. The levers do not affect the comfort while braking and clutch operation. Even the force to be applied during clutch operation does not have to be increased noticeably....
Available
€79.95
*
;
€39.95
*
NEW
This is an original spare part from the Fantic brand. It is made of CNC-milled aluminium, is anodized red and features the Fantic logo, which gives it a sporty design. OEM number for comparison purposes: 08904005
Out of Stock
€59.95
*
NEW
With the Fantic Original CNC engine cover lock set in red, you not only give your Fantic a sporty look, but also replace the standard plastic screws with high-quality aluminum parts. Advantages Visual highlight : The red anodized screws...
Out of Stock
€39.95
*
Passenger footrests, Beta RR 125 from year 21, various colors Colors
This pillion footrest set incl. bracket is the ideal solution for anyone who wants both functionality and style on their bike. The footrests are CNC-milled and offer high precision and quick, uncomplicated installation. Perfectly matched...
Out of Stock
€79.95
*
With the footrests from UMA for your YZF-R/MT 125 , you get a bit more design and reliability for your machine. Made from high-quality aluminum alloys and then CNC-milled, they offer maximum precision and durability. The footrests are...
Out of Stock
€109.90
*
With CNC parts you have the opportunity to create with minimal effort an individual look to your Sherco SE 125 2 Takt to create. Parts like, Öleinfüllschrauben, brake cylinder cover, chain protector or even sprocket cover & motorcycle covers from CNC are mounted or replaced in a few minutes. Even more the parts, compared with a tuning exhaust system or a größeren cubic kit, significantly cheaper.
Apart from the erwähnten points CNC optics parts offer a much higher quality appearance than the Standard parts of the SE 125 2 Takt. We ourselves offer our own parts from Radical Racing only after strict quality control. quality control. So in addition to fit and visual impact, we also check function! For example the brake cylinder covers have a hole to prevent a vacuum in the reservoir, just like the original cover. can arise.
In addition, there are also a variety of different colors, so you also the right CNC parts matching the color of your motorcycle have.
Viewed