No results were found for the filter!
Color matching, CNC milled 28.5mm handlebar mounts for the perfect finish on your bike! The mount is completely CNC machined and anodized afterwards. Available in different colors. Scope of delivery: 2pcs.
Available
€29.95
*
;
From €19.95
*
Motocross footpegs with widened contact area and improved grip. Made of CNC machined and anodized aluminum. The footrests are supplied together with the footrest adapters known from Radical. The rests are then bolted directly to the...
Available
€38.95
*
From Radical Racing we can offer here different color anodized aluminum footpegs. The footrests are simply replaced against the originals. The assembly can be done within about 10 min. The footrests are supplied with the appropriate...
Available
€39.95
*
Simple handlebar grip rubbers with optional red or black anodized sleeves on the front and rear part of the handle. The rubbers are medium soft and thus universally applicable. The assembly is quite Simpel. The indicated handlebar ends...
Available
€20.95
*
;
€15.95
*
Motocross footpegs with widened contact area and improved grip. Made of CNC machined and anodized aluminum. The footrests are supplied together with the footrest adapters known from Radical. The rests are then bolted directly to the...
Available
€38.95
*
Matching the various other engine styling parts from Radical Racing, herewith also comes a fully enclosing rear brake cylinder guard. incl. mounting material
Available
From €14.99
*
Aluminum fairing screws from Motoflow, in colored anodized finish. The screws are provided with wide lens head and a hexagon socket. So the fairing holds securely in place. Since it is aluminum, these screws are not suitable for high...
Available
€3.99
*
Brake & clutch lever guards are used on racing motorcycles similar to handguards on motocross bikes. However, they are intended less to protect the hands from mud and debris and more to protect the levers from a fall. That way, if the...
Available
€29.99
*
CNC machined styling shift lever from Radical Racing. The lever is available in 3 different anodized colors. The folding front part of the lever is always aluminium coloured. The Radical Racing logo is printed on the side of the lever....
Available
€49.95
*
;
From €39.95
*
Small, but fine detail that calls for change. With this anodized release lever you can remove the old disdainful release lever and set a chic colored accent on the engine. Absolutely high-quality product made of CNC-milled aluminum.
Available
From €15.95
*
Who is looking for a lever set with ABE, or KBA approval will find it here. The majority of levers offered on the market for Beta RR, or other vehicles, are offered without ABE. At the TÜV, or also not rarely occurring police controls,...
Almost gone
€104.90
*
We offer a complete set consisting of adjustable brake lever and clutch lever armature. Also included is a master cylinder for hydraulic brakes. The individual parts of the set are mostly CNC milled and have an extremely attractive...
Available
€99.90
*
;
€69.90
*
CNC machined brake fluid reservoir from Motoflow. Available in different colors.
Available
€19.95
*
;
From €15.00
*
Among our handlebar attachments is also a cover for the front brake cylinder. The cover consists of 2 parts, which are connected by the mounting screws. Both parts were CNC-milled and are made of aluminum. The cover is available in 3...
Available
€22.95
*
If you are looking for a lever set with ABE or KBA approval, you will find it here. The majority of the levers offered on the market for Yamaha YZF-R & MT 125 are offered without ABE. At the TÜV, or also not infrequently occurring police...
Available
€104.90
*
Here we can offer CNC manufactured, and color anodized brake levers & clutch levers from Radical as a set. The levers themselves consist of two parts. One is the adapter, which is needed to fix the lever to the vehicle, and the lever...
Available
€51.95
*
From Radical Racing we can offer different color anodized aluminum footrests. The footrests are simply exchanged against the originals. The assembly can be done within about 10 minutes and is quite simple. The footrests are delivered...
Available
€40.95
*
CNC machined brake cylinder cover, fits on the rear master cylinder of the Aprilia RX & SX models from 2018 up, available in different colours. Delivery without seal! Aprilia OEM Part No.: Part of 2R000490
Available
€14.95
*
;
From €5.99
*
From Radical Racing we can offer different color anodized aluminum footrests. The footrests are simply exchanged against the originals. The assembly can be done within about 10 minutes.
Available
€39.95
*
Tank ventilation hose with coloured anodised end cap
Available
€5.99
*
;
From €3.99
*
Spare footrest pair from Radical. Can be mounted on Radical Racing footrest adapters. Note Delivery WITHOUT footrest adapter!
Available
€22.95
*
Stand mounts are used to use motorcycle paddock stands with claw mounts. The stand holders are 2-part black and orange anodized.
Available
€12.90
*
Simple CNC milled styling part for KTM Duke or RC 125, the screw is located at the top of the clutch housing. Great optical effect for a small budget!
Available
€13.99
*
The most visually dangerous valve caps you can buy. The new valve caps, in the design of a hand grenade, are a real eye-catcher. Available in different colours. Scope of supply: 1 pair.
Available
€3.09
*
With CNC parts you have the opportunity to create with minimal effort an individual look to your Sherco SE 125 2 Takt to create. Parts like, Öleinfüllschrauben, brake cylinder cover, chain protector or even sprocket cover & motorcycle covers from CNC are mounted or replaced in a few minutes. Even more the parts, compared with a tuning exhaust system or a größeren cubic kit, significantly cheaper.
Apart from the erwähnten points CNC optics parts offer a much higher quality appearance than the Standard parts of the SE 125 2 Takt. We ourselves offer our own parts from Radical Racing only after strict quality control. quality control. So in addition to fit and visual impact, we also check function! For example the brake cylinder covers have a hole to prevent a vacuum in the reservoir, just like the original cover. can arise.
In addition, there are also a variety of different colors, so you also the right CNC parts matching the color of your motorcycle have.
Viewed