2. Filter by category
No results were found for the filter!
Dimensions: Mounting hole spacing: 40mm; diameter: 6.5mm Total length: 83mm Connection: top Connection thread: M10x1mm Piston diameter: 12mm OEM number for comparison : 25.91177.009
Available
€48.95
*
In this universal brake fitting are only 2 things to note. Firstly, it fits on handlebars with a 22mm diameter. Secondly, no mirror thread is pre-drilled.
Available
€19.99
*
Standard pad compound for virtually all applications. The optimal performance offer the pads under normal driving conditions, so with rather cool brake system. The stability is of course also given at high temperatures, but the pads tend...
Available
€24.95
*
;
€15.95
*
CNC machined brake fluid reservoir from Motoflow. Available in different colors.
Available
€19.95
*
;
From €15.00
*
Among our handlebar attachments is also a cover for the front brake cylinder. The cover consists of 2 parts, which are connected by the mounting screws. Both parts were CNC-milled and are made of aluminum. The cover is available in 3...
Available
€22.95
*
Faulty braking effect is life-threatening and often due to a leaking brake pump. Repair is not always sensible or possible. In many cases there is no way around replacement. With this we offer an inexpensive universal part. Colour:...
Available
€32.95
*
Preassembled brake caliper incl. axle carrier and brake pads for Rieju Marathon (MRT) 125 . OEM part number for comparison purposes 0/000.860.5102
Available
€74.95
*
Cheap alternative to expensive original brake pads, but still high quality! This set of brake pads is suitable for everyday use, especially the longevity and solid brake performance characterize them. Technical data Dimensions: 85x42,5mm...
Available
€19.99
*
;
€12.95
*
Bolt and dust protection rubber as spare part for the brake pump of many Aprilia, Derbi, Rieju bikes.
Available
€6.99
*
CNC machined brake cylinder cover, fits on the rear master cylinder of the Aprilia RX & SX models from 2018 up, available in different colours. Delivery without seal! Aprilia OEM Part No.: Part of 2R000490
Available
€14.95
*
;
From €5.99
*
Typical brake disks, or sprocket bolt with blue dry thread lock (medium strength). Can also be used anywhere else on the moped. Thread: M6 Head: Flat / Torx Length: 20 mm
Available
€1.99
*
During maintenance work on the brake system, these small parts are often lost. The bleeder nipple can then become clogged and maintenance of the brake system becomes impossible the next time. A cover should therefore always be installed!
Available
€2.99
*
Faulty braking effect is life-threatening and often due to a leaking brake pump. Repair is not always sensible or possible, in many cases there is no way around replacement. Technical data Distance between the mounting holes: 50 mm...
Available
€19.95
*
Standard brake pad set from Motoflow. The compound is ideal for all applications involving road traffic. For racing purposes sports pads should be used due to the higher thermal load. Please compare the illustrated shape before...
Available
€13.99
*
;
€4.99
*
⚠️Aufgrund Due to the large number of different rims used, it is not always possible to assign brake discs, as well as sprockets, without any doubt. We therefore ask you to compare the technical data specified in the item description...
Available
€19.99
*
;
€19.95
*
Universal hand brake cylinder for the front disc brake. The complete fitting is delivered including brake lever and is equipped with a brake light switch. The brake cylinder is ideal for handlebar conversions and/or as an alternative...
Available
€22.95
*
NEW
JMC Entlüfternippel M8x1.25 – hochwertiges Ersatzteil zum einfachen Entlüften von Bremsanlagen und hydraulischen Systemen. Gefertigt aus robustem Material und in verschiedenen Farbvarianten erhältlich, sorgt der Entlüfternippel für...
Available
€18.99
*
Brake hose extension, Universal item, various angles, steel braided, 10 cm, with parts certificate
This steel braided brake hose extension is the clean solution when more hose length is required due to handlebar risers or a handlebar conversion. The original brake hose remains in place and is simply extended by 10 cm . This saves you...
Available
€41.95
*
Brakepump-lever set, Universal, front, without ABE
The universal radial brake pump for the front brake is the ideal solution if you want to significantly increase braking performance while achieving a clean racing look on the cockpit. The combination of brake lever and radial master...
Almost gone
€78.90
*
The CNC-milled brake cylinder cover from VOCA features precise workmanship and a robust aluminum housing that is significantly more durable than many standard covers. The anodized surface provides reliable protection against corrosion...
Available
€13.99
*
CNC-machined brake cylinder cover, fits the rear master brake cylinder of Aprilia RX & SX models from 2018 onwards. The cover is available in different colors. Please note: Delivery does not include a seal! Aprilia OEM part no.:...
Available
€13.99
*
The Beta Wave brake disc for the rear wheel not only adds style, but also provides noticeably better deceleration when riding sportily – whether on the road or off-road. The wave-shaped design reduces weight, dissipates heat more...
Out of Stock
€61.99
*
Brake disk, Sherco SE/SM 125 from 23 years of construction, 300mm, front end
The brake disc with an outer diameter of 300 mm offers optimum braking function, even under tough conditions, thanks to its special sporty design. Optimum design ensures perfect heat dissipation, guaranteeing braking safety at all times.
Almost gone
€56.95
*
Original Beta replacement brake caliper incl. mounting plate for the rear axle. Technical data Axle: 15 mm Piston diameter: 30 mm OEM part number for comparison purposes 25.03073.009
Available
€226.90
*
Viewed