2. Filter by category
No results were found for the filter!
This article is an original spare part (OEM) of the manufacturer of the brand KTM.
Available
€2.19
*
This article is an original spare part (OEM) of the manufacturer Yamaha.
Available
€1.99
*
We offer you a cylinder kit for the Yamaha YZF-R125 with three programs stored on the ignition unit "Force Master 1" for the optimal adjustment of the injection to the driving application. With the first program the original ignition...
Available
€355.00
*
We offer you the Malossi cylinder kit, with full 180cc capacity for the Yamaha YZF-R125 (until 2013), and WR 125. The Malossi "Force Master" control unit, with four stored programs, and the possibility of fine-tuning the mixture in any...
Out of Stock
€599.90
*
Rocker arm set, Yamaha / Minarelli YI 4-Takt Motoren
The rocker arms operate the valves in the 4-stroke cylinder head. Since the part actuated by the camshaft is mounted is mounted on ball bearings it is mechanical exposed to mechanical wear. These rocker arms are the perfect & cheap...
Available
€39.90
*
Naraku 200cc Big-Bore ceramic cylinder kit with 66mm bore and hard chrome plating, suitable for Yamaha WR, YZF-R, MT and many other 125cc with Yamaha YI engine. Supplied as shown with all seals and small parts necessary for assembly. The...
Available
€229.90
*
Nockenwelle Original Replica, Yamaha YI-3/4 Motor
Poorly maintained Yamaha YI engines often have problems with a run-in camshaft. This is especially noticeable in the loss of power that occurs. Also the readjustment of the valves brings then nothing more, because the chrome layer of the...
Available
€49.90
*
Small component with great effect. The valve stem seals influence for example the oil consumption. Hard "stems" let oil run down the valve, which is then burned. For any work on the dismantled cylinder head, it is anyway recommended to...
Available
€7.49
*
;
€5.99
*
Valve stem seals are installed to prevent oil from the cylinder head from entering the combustion chamber via the valve guides. A blue smoking exhaust can be an indication for defective valve stem seals besides other damages. Suitable as...
Available
€5.95
*
;
€4.20
*
Paper seal to seal the timing chain housing. Should be replaced during all maintenance work on the timing chain tensioner. OEM part number for comparison purposes 430350; 834254; 862777; AP8550429; AP8575011; 847928
Available
€3.19
*
Cylinder kit from Airsal in standard 54mm bore for Yamaha YBR 125, this cylinder kit can be used if for example the original cylinder is damaged or worn out. So you have a cheap replacement for the expensive original spare part. The...
Almost gone
€179.90
*
;
€125.90
*
TNT aluminium replacement cylinder kit for air-cooled Yamaha 125cc engines (mostly used before 2006, but some still used today). Especially when the original cylinder is worn out or loses performance due to age and high mileage, a...
Almost gone
€69.95
*
This cylinder kit for Yamaha YBR 125 increases the standard displacement from 125cc to a full 150cc. This allows you to get some more power and especially some torque from the standard YBR-125 engine. When using this cylinder, the...
Almost gone
€139.90
*
If the timing chain tensioner is replaced, it may be necessary to renew its seal as well. Here we offer this spare part original from Yamaha. OEM part number for comparison purposes 1DYE22130000
Out of Stock
€4.24
*
Compared to the 150cc cylinder kit from Naraku, the 177cc cylinder has of course been given an even larger bore which in turn can further optimise the performance of the engine. Since in cubic classes from 160cc on the original ECU...
Almost gone
€219.90
*
Replacement gaskets for the Yamaha DT 125 R/RE and X cylinders.
Almost gone
€30.95
*
Replacement gaskets for the Piaggio 125cc 4-stroke engine, which was used for example in the Aprilia RS4 125.
Available
€79.95
*
Athena 125cc cylinder kit for Yamaha 125cc LC 2-stroke engines. The cylinder kit consists of an aluminium cylinder, a matching head and gaskets. For the exhaust control a suitable rotating cylinder is included. The cylinder is perfectly...
Out of Stock
€549.90
*
Athena 170cc cylinder kit for Yamaha 125cc LC 2-stroke engines. The cylinder kit consists of an aluminium cylinder, as well as a matching head and gaskets. For the exhaust control a suitable rotating cylinder is supplied. The carburetor...
Available
€589.95
*
Timing chain tensioner seal Flat gasket KTM- Original spare part OEM part number for comparison purposes 90136003003
Almost gone
€3.50
*
Seal timing chain tensioner KTM, KTM Duke, RC 125/200/390, O-ring
Timing chain tensioner seal O-ring 10.15X1.5 mm Original spare part OEM part number for comparison purposes J770010015
Available
€2.19
*
Pneumatic exhaust system for the Aprilia RS 125 engine. Most people will have noticed on their 125cc Aprilia RS that when the engine is de-throttled the power is suddenly released at around 8000 rpm by opening the exhaust slide. As this...
Available
€155.90
*
From Italkit we can offer here a supplement to the 125cc original Rotax cylinder, as well as the 140cc tuning cylinder kit. The combustion chamber calotte clearly increases the compression of the cylinder and is optimized in its geometry...
Available
€89.95
*
From Italkit we can offer here a supplement to the 125cc original Rotax cylinder, as well as the 140cc tuning cylinder kit. The combustion chamber calotte clearly increases the compression of the cylinder and is optimized in its geometry...
Almost gone
€89.95
*
The cylinder is the heart of your Sherco SE 125 2 Takt. This is where all the power at your disposal comes from. In modern engines are built to be very robust and durable. Nevertheless it can happen that a part of your cylinder breaks and you need a spare part. This is the case, for example, with the engine gasket from time to time. In this case, you should also carry out a repair on your SE 125 2 Takt, because a defective cylinder not only cylinder not only costs you performance on the road, but in the worst case it can also lead to a major more serious (and more expensive) damage to other areas of the engine.
In addition to replacement pistons, you can also find replicas of the original 125cc cylinders. So you can get the "factory condition" of your Sherco SE 125 2 Takt at any time.
Darüberhinaus we offer some tuning packs and tuning cylinders. Here there are different sizesößen between 125cc to 183cc displacement. So you increase the performance of your SE 125 2 Takt für the race track.
.
Viewed