No results were found for the filter!
This article is an original spare part (OEM) of the brand KTM OEM part number for comparison purposes 93530027000 Scope of delivery: 1 pc.
Out of Stock
€12.99
*
The basis for an optimally functioning engine and good maintenance of your vehicle is a tight engine. An oil leak is not only bad for the environment, but can also lead to dicey situations in fast cornering. So if you discover a leak...
Almost gone
€20.90
*
This article is an original spare part (OEM) of the manufacturer of the brand Honda.
Almost gone
€4.49
*
;
€2.49
*
This article is an original spare part (OEM) of the manufacturer of the brand KTM.
Out of Stock
€2.99
*
This article is an original spare part (OEM) of the manufacturer of the brand Kawasaki.
Available
€1.75
*
Special screw for fixing the clutch basket. Supplied with the necessary washer to fix the clutch spring. Scope of delivery: 1stck. Yamaha OEM part number for comparison: 1S7E67770000
Available
€0.39
*
Standard Honda clutch lever. Suitable for CB 125 R and MSX 125. Reference numbers: Honda: 53178KV0000
Available
€19.99
*
Clutch cover seal, Honda 125 4T AC
Clutch cover gasket for Honda 125cc AC (Air-Cooled) engines. Fits for example Honda CBF. thickness: 0,5mm Material: Paper
Available
€10.99
*
Reinforced clutch springs increase the contact pressure on the clutch linings and thus prevent the clutch from slipping. Especially after tuning work. Reinforced clutch springs can be used as a spare part for lighter tuning stages but...
Available
€14.99
*
TRW-Lucas clutch springs 10% harder than the original springs. Delivery as complete set.
Out of Stock
€19.99
*
Reinforced clutch springs from EBC, 10% harder than the original springs. Provides relief for slipping clutches by increasing performance.
Almost gone
€15.50
*
10% harder clutch springs from TRW-Lucas. The increased pressure on the clutch plate prevents the clutch from slipping. Delivery as set consisting of 4 pcs.
Available
€14.90
*
10% harder clutch springs from TRW-Lucas. The increased pressure on the clutch plate prevents the clutch from slipping. Delivery as a set consisting of 5 pcs.
Almost gone
€17.50
*
If the coupling is replaced or other maintenance work is pending under the coupling cover, it is always advisable to invest in a new seal at the same time. Subsequent oil leaks are always annoying and can thus be avoided.
Available
€7.99
*
Athena, an international company founded in 1973, designs and manufactures gaskets, technical spare parts and metal components for the industrial and motorcycle sector to the highest quality standards. Athena gaskets are therefore the...
Available
€10.99
*
Replacement gasket for the clutch cover of the Yamaha DT 125 engine which was used on the models R/RE/X from year 99-06.
Available
€7.99
*
Spare gasket for the clutch cover of the Aprilia RS4 125 or all mopeds with Piaggio 125cc 4-T engine.
Available
€11.99
*
The EBC CK standard clutch plates correspond to the original plates in dimension and quantity. The lining material is cork based with a high aluminium content to reduce wear and fading to a minimum. The highly compressed material...
Available
€35.95
*
Reinforced clutch springs from EBC, 10% harder than the original springs. Shank remedy for slipping clutches by increasing performance.
Almost gone
€15.50
*
To ensure that the clutch discs can withstand the high stresses and temperatures of racing, these pads are made of carbon fibre. Wear and fading are reduced to a minimum and even under extreme loads the material prevents the pads from...
Almost gone
€60.95
*
Cork-based product, impregnated with aluminium particles to increase durability and heat resistance. The material is highly compacted to avoid swelling. The CK series clutch kits contain a complete set of friction linings and are...
Available
€35.95
*
Features Increased compression force of 10 to 15% compared to standard springs Reduction of clutch slippage Made of heat-treated carbon steel
Available
€13.99
*
Newfren offers a wide range of brake spare parts as well as clutch pads in different qualities. The cork pads offered here are well comparable with the original pad plates. But according to Newfren they should last a bit longer than the...
Available
€69.95
*
In addition to the standard cork clutch facings, Newfren can also offer you a reinforced carbon kit. The special carbon mixture makes the clutch plates much more grippy! This makes it impossible for the clutch to slip even with heavily...
Available
€89.95
*
Viewed