No results were found for the filter!
Out of Stock
€101.65
*
Out of Stock
€17.40
*
Out of Stock
€305.75
*
Out of Stock
€414.64
*
From the manufacturer Italkit comes a reed box type VForce. Italkit has developed a removable double prism reed box with carbon blades. It is specially designed to optimize gas circulation and flow. In addition, the inlet with a diameter...
Available
€109.90
*
for cylinder models 60433 (old) and 73037 (modern). This valve is actuated by the exhaust gas pressure and opens in stages from 5,000 to 6,000 rpm. Homologation: No
Available
€119.90
*
This carburetor is recommended as a spare part for 125cc 4-stroke engines. It also fits Yamaha and Suzuki 4T engines. The Naraku PZ26 carburetor is equipped with manual flap choke. technical data: main jet: 85 (5mm) hole spacing intake...
Almost gone
€29.90
*
Replacement fuel injector from Piaggio. Suitable for 125cc 4-T Aprilia engines. OEM part number for comparison 890225
Available
€139.90
*
Fuel tap Original spare part OEM part number for comparison purposes 18G245000200
Available
€99.95
*
;
€79.95
*
Fuel pump Original spare part OEM part number for comparison purposes: 640517
Out of Stock
€269.90
*
Fuel tap Original spare part OEM part number for comparison purposes AP8102819
Available
€29.99
*
Exhaust slider Italkit Racing, Rotax 122/123 (Aprilia RS/RX/SX 125, 2-stroke), adjustable
The exhaust slide valve of throttled Rotax 122 & 123 engines is opened abruptly at 8,000 rpm by the electrical control of the slide valve. Not everyone can cope with this sudden power delivery and not everyone wants to be driving at such...
Available
€139.90
*
;
€119.90
*
Pneumatic exhaust system for the Aprilia RS 125 engine. Most people will have noticed on their 125cc Aprilia RS that when the engine is de-throttled the power is suddenly released at around 8000 rpm by opening the exhaust slide. As this...
Available
€155.90
*
This wiring harness is needed to connect the Polini ECU device to Yamaha injectors.
Out of Stock
€24.95
*
The Malossi Force Master II system primarily manipulates the injection times, which are passed on from the original control unit to the injection nozzle. This system is included in the 180cc cylinder kit. With three different...
Out of Stock
€285.00
*
With the Athena GET Chiptuning, the original performance of the KTM Duke can be increased by a few extra horsepower, depending on which setup is used. The GET unit is simply exchanged for the original CDI control unit. Afterwards the...
Almost gone
€329.95
*
The V-Force reed valve block from Italkit has a maximum cross-section on the smallest valves. This allows the diaphragms to open and close with less inherent gas force, resulting in higher efficiency and improved motor performance....
Available
€109.90
*
Replacement petrol tap for Rieju motorcycles (MRT). Technical data Diameter: 15mm Cock positions : Left side : To Top : Open Right : Reserve Incl. fuel filter. OEM number for comparison : 0/000.370.0500
Available
€11.99
*
Here we offer a vacuum fuel tap for all motorcycle models with carburetor. The fuel tap is simply pushed into the tank instead of the old one and can also be used to convert from manual operation to automatic operation. We recommend to...
Available
€8.99
*
Here we offer a simple choke, with an actuator, which can be installed in the fairing of the vehicle as desired. The lever is delivered with a cable pull, can only be used in vehicles with carburetor.
Available
€12.99
*
6mm clamp for fuel hoses. Delivered is 1 piece.
Available
€1.99
*
Fuel hose with one meter length and 5mm inner diameter. In many different colours. In addition to its actual use as a petrol hose, it can also be used as a hose for many other purposes. Available in many different colours. The hose can...
Available
€2.00
*
Float chamber drain plug, PWK Carburetor, Orange
Simple styling part for flat slide and type PWK carburetor. The screw is made of anodized aluminum. Delivery Incl. gasket
Available
€6.00
*
Oil hose, 2,2x4mm, 5m long, green, universal
Here we offer you a transparent green oil hose. Dimensions: Inner diameter: 2,2mm Outer diameter: 4mm Length: 5m
Available
€3.49
*
Viewed