No results were found for the filter!
for cylinder models 60433 (old) and 73037 (modern). This valve is actuated by the exhaust gas pressure and opens in stages from 5,000 to 6,000 rpm. Homologation: No
Almost gone
€119.90
*
This carburetor is recommended as a spare part for 125cc 4-stroke engines. It also fits Yamaha and Suzuki 4T engines. The Naraku PZ26 carburetor is equipped with manual flap choke. technical data: main jet: 85 (5mm) hole spacing intake...
Almost gone
€29.90
*
Replacement fuel injector from Piaggio. Suitable for 125cc 4-T Aprilia engines. OEM part number for comparison 890225
Available
€139.90
*
Fuel tap Original spare part OEM part number for comparison purposes 18G245000200
Out of Stock
€99.95
*
;
€79.95
*
Fuel pump Original spare part OEM part number for comparison purposes: 640517
Out of Stock
€269.90
*
Fuel tap Original spare part OEM part number for comparison purposes AP8102819
Available
€29.99
*
Exhaust slider, Rotax 122/123 (Aprilia RS/RX/SX 125, 2-stroke), adjustable
The exhaust slide valve of throttled Rotax 122 & 123 engines is opened abruptly at 8,000 rpm by the electrical control of the slide valve. Not everyone can cope with this sudden power delivery and not everyone wants to be driving at such...
Available
€169.90
*
;
€129.90
*
In modern 4-stroke engines, an engine that no longer starts is often due to a defective fuel pump. Due to the small design, the electronics of these pumps are unfortunately very susceptible to malfunctions. We offer you a replacement...
Almost gone
€109.90
*
Pneumatic exhaust system for the Aprilia RS 125 engine. Most people will have noticed on their 125cc Aprilia RS that when the engine is de-throttled the power is suddenly released at around 8000 rpm by opening the exhaust slide. As this...
Available
€155.90
*
This wiring harness is needed to connect the Polini ECU device to Yamaha injectors.
Out of Stock
€24.95
*
The Malossi Force Master II system primarily manipulates the injection times, which are passed on from the original control unit to the injection nozzle. This system is included in the 180cc cylinder kit. With three different...
Out of Stock
€285.00
*
With the Athena GET Chiptuning, the original performance of the KTM Duke can be increased by a few extra horsepower, depending on which setup is used. The GET unit is simply exchanged for the original CDI control unit. Afterwards the...
Almost gone
€329.95
*
The V-Force reed valve block from Italkit has a maximum cross-section on the smallest valves. This allows the diaphragms to open and close with less inherent gas force, resulting in higher efficiency and improved motor performance....
Available
€109.90
*
Bei diesem Artikel handelt es sich um eine günstige Alternative zum teuren Originalersatzteil. Der Benzinhahn kann mit allen Setuos verwendet werden, die einen entsprechend großen Anschluss haben. Wir empfehlen, den O-Ring zusätzlich mit...
Available
€6.99
*
;
€4.49
*
Replacement petrol tap for Rieju motorcycles (MRT). Technical data Diameter: 15mm Cock positions : Left side : To Top : Open Right : Reserve Incl. fuel filter. OEM number for comparison : 0/000.370.0500
Available
€12.99
*
Here we offer a vacuum fuel tap for all motorcycle models with carburetor. The fuel tap is simply pushed into the tank instead of the old one and can also be used to convert from manual operation to automatic operation. We recommend to...
Available
€8.99
*
Here we offer a simple choke, with an actuator, which can be installed in the fairing of the vehicle as desired. The lever is delivered with a cable pull, can only be used in vehicles with carburetor.
Available
€12.99
*
6mm clamp for fuel hoses. Delivered is 1 piece.
Available
€1.99
*
Fuel hose with one meter length and 5mm inner diameter. In many different colours. In addition to its actual use as a petrol hose, it can also be used as a hose for many other purposes. Available in many different colours. The hose can...
Available
€2.00
*
Manual choke cable Motoforce, PWK / CP / Flat Slide carburetor, red
The manual choke for PWK and Polini CP carburetors gives you full control over the cold start of your scooter or moped. Instead of relying on an automatic choke, you can now adjust the fuel/air mixture manually. This ensures reliable...
Out of Stock
€6.90
*
Fuel hose / petrol hose, 1m, neoprene, rubber compound, various diameters
Fuel hose / Petrol hose In the following variants: 6mm 7mm 8mm Length : 1m
Available
From €14.99
*
Fuel filter, 7mm, various colors
The aluminum elements of this fuel filter are available in different colors. This allows the filter and hoses to be visually matched. The connection width of the filter is 7 mm. The fuel hoses we offer are therefore a perfect fit.
Available
€9.99
*
Float chamber drain plug, PWK Carburetor, Orange
Simple styling part for flat slide and type PWK carburetor. The screw is made of anodized aluminum. Delivery Incl. gasket
Almost gone
€6.00
*
Oil hose, 2,2x4mm, 5m long, green, universal
Here we offer you a transparent green oil hose. Dimensions: Inner diameter: 2,2mm Outer diameter: 4mm Length: 5m
Available
€4.99
*
Viewed