1. Choose model
RS 125 (ab 2021, XA- Euro5)
RS 125 (2017 bis 2020, KC - Euro4)
RS4 125 (2011 bis 2017, TW - Euro3)
RS 125 (2006 bis 2013, RM/RD)
RS 125 (1995 bis 2005, MP/SF)
No results were found for the filter!
Technical data Outer diameter: 218 mm Inner diameter: 57 mm bolt circle: 80 mm Number of mounting holes: 6 mounting hole: 6,7 mm Countersink: none thickness: 3,5 mm Notes Due to the multitude of differently used rims, a doubtless...
Available
€27.95
*
Typical brake disks, or sprocket bolt with blue dry thread lock (medium strength). Can also be used anywhere else on the moped. Thread: M6 Head: Flat / Torx Length: 20 mm
Available
€1.99
*
Out of Stock
€156.20
*
Out of Stock
€228.59
*
Technical data Outside diameter: 220 mm Inner diameter: 110 mm bolt circle: 124 mm Number of mounting holes: 6 Mounting hole: 6.5 mm Countersink: 90° thickness: 4 mm Notes Due to the large number of differently used rims, it is not...
Almost gone
€61.95
*
Dank jahrzehntelanger Erfahrung im Bereich Bremstechnik setzten NG Bremsscheiben immer wieder Maßstäbe und überzeugen durch Qualität, höchste Präzision, lange Laufleistung, Optik und einem herausragenden Preis-/Leistungsverhältnis....
Almost gone
€92.95
*
Brake discs Screws, 3x countersunk head M8 20mm
Screws used to fix the brake disc. This article is a universally applicable product, which can be used for very many different brake discs. Please compare the shown screws with the original screws to avoid ordering errors! - thread M8 -...
Available
€1.29
*
Pack of 5 screws, M6 x 20 mm, flat head / inside corner (Torx), stepped
Typical brake disks, or sprocket bolt with blue dry thread lock (medium strength). Can also be used anywhere else on the moped. Thread: M6 Head: Flat / Torx Length: 20 mm
Available
€9.99
*
Screw, M6, with collar, pack of 4
Collar screw with M6 thread and 16mm length is idr. used as brake disk screw. But it can also be used for everything else. Thread: M6 Head: 6 Kant length: 16 mm
Available
€5.49
*
Schraube, M8 x 18 mm, Flachkopf / Innensechskant (TX), abgesetzt
Diese Schrauben werden idr. als Bremsscheiben-, oder Kettenradschrauben verwendet. Inkl. trockener Schraubensicherung (blau - mittelfest). Gewinde: M8 Kopf: Flach / TX Länge: 18 mm
Out of Stock
€2.49
*
Brake discs from EBC, Made In UK. The aim of the development is to improve the braking behaviour compared to the original brake disc. EBC uses HPSR steel with a low carbon content, which has an 18% higher friction coefficient. This steel...
Almost gone
€67.95
*
Original brake disc (rear wheel) from Piaggio, suitable for various vehicle models of the Piaggio Group. D= 218mm OEM part number for comparison purposes 866115
Available
€21.99
*
Piaggio original spare part, diameter: 300mm OEM part number for comparison purposes 866090, 00H01215021
Available
€59.95
*
Technical data Outer diameter: 300 mm Inner diameter: 90 mm bolt circle: 104 mm Number of mounting holes: 6 Mounting hole: 6.6 mm Reduction: none thickness: 4 mm Notes Due to the large number of differently used rims, it is not always...
Out of Stock
€34.95
*
Available
€2.49
*
Available
€1.99
*
Available
€2.49
*
Wave brake discs from Galfer increase safety and also convince visually. The danger of brake fading is reduced due to an increased heat emission caused by the shape of the disc. In combination with rather expensive sintered metal brake...
Almost gone
€99.95
*
Brake disc lock, universal, incl. key
A brake disc lock additionally protects your moped against theft. The lock is quite small and can therefore be carried under every seat without problems. To secure the lock, the lock is simply passed through a hole or groove in the brake...
Available
€11.99
*
Viewed