1. Choose model
RS 125 (from 2025, XTA (Euro5+))
RS 125 (2021 to 2024, XA- Euro5)
RS 125 (2017 to 2020, KC - Euro4)
RS4 125 (2011 to 2017, TW - Euro3)
RS 125 (2006 to 2013, RM/RD)
RS 125 (1995 to 2005, MP/SF)
No results were found for the filter!
NEW
Movetronix’s WP fork rings are a perfect fit for motorcycles equipped with WP forks and serve both to enhance the bike’s appearance and to protect the fork seals. They are installed in place of the original fork rings and reduce the...
Available
From €24.90
*
This item is an original equipment manufacturer (OEM) replacement part from Aprilia OEM part number for comparison purposes : AP8101271 Contents: 1
Available
€2.99
*
This original fork tube cap from Piaggio serves as a cap or closure for the front fork tubes, ensuring that dirt, moisture, and damage are kept away from the internal components. Manufactured in original quality, it impresses with its...
Available
€24.95
*
This original O-ring from Piaggio acts as a small but essential sealing component in the exhaust, engine, or fork system. Manufactured to factory standards, it provides reliable sealing against oil, air, or exhaust gases—thus...
Available
€4.99
*
This original Piaggio special washer (often referred to as a shim or spacer washer) is a small but important connecting part for the precise assembly and adjustment of components—e.g., in the front fork or transmission unit area. It...
Available
€7.99
*
This original oil seal with part number B044055 from the Piaggio Group is a high-quality connecting element for axles, forks, or transmission flanges in vehicles from Aprilia, Derbi, Gilera, Vespa, Moto Guzzi, and Piaggio. Manufactured...
Available
€9.99
*
This original retaining ring (snapping ring) from Piaggio is a small but very important fastening element in the front fork or other mechanical components. Manufactured in OEM quality, it ensures that components are securely fixed in...
Available
€2.99
*
Fork dust cap for USD forks on Aprilia RS 4 and RS 125 with 2- or 4-stroke engines. OEM part number for comparison purposes Aprilia: B044057 Scope of delivery: 1 piece.
Available
€7.99
*
Dust caps from JMP - better breakaway torque and lower friction due to special grease coating
Available
€14.99
*
Replacement sealing rings for the fork. Dimensions: 40x52.2x10/10.5, supplied in pairs
Almost gone
€14.99
*
This article is an original spare part (OEM) from Aprilia OEM part number for comparison purposes : PIA-896516 Scope of delivery: 1
Out of Stock
€43.52
*
Spongy riding behaviour or obvious oil loss at the fork are signs that it is time for a fork service. Athena sealing rings are of higher quality than OEM seals, or are even used as OEM seals by fork manufacturers. Athena sealing rings...
Available
€10.99
*
Viewed