1. Choose model
RX/SX 125 (ab 2021, KT - Euro5)
RX 125 (2018 bis 2020, KXA - Euro4)
No results were found for the filter!
This item is a cheap alternative to the expensive original spare part. The plate corresponds to the original in shape and dimensions. OEM part number for comparison purposes: 2B004468
Available
€2.49
*
Tire valve caps from Radical Racing with a sporty and modern design.
Available
€5.49
*
Replacement mounting plate with 2 screws. Used for mounting GP-Pro exhaust systems on Yamaha YZF-R 125 and MT 125 from Bj. 2021. But can also be used as a bracket for tinkering with all sorts of other uses. Technical data Dimensions:...
Available
€2.49
*
During maintenance work on the brake system, these small parts are often lost. The bleeder nipple can then become clogged and maintenance of the brake system becomes impossible the next time. A cover should therefore always be installed!
Available
€2.99
*
6mm clamp for fuel hoses. Delivered is 1 piece.
Available
€1.99
*
Hose clamps can be used in almost any application. Whether as reinforcement of the rubber mountings of the exhaust, or as a normal water hose clamp.
Available
€1.29
*
NEW
Aprilia OEM Ölmessstab (inkl. Dichtung) OEM Teilenummer: 874676
Out of Stock
€10.99
*
NEW
Lieferumfang 1 Stück! OEM Teilenummer: AP8150284
Out of Stock
€0.59
*
NEW
This item is an original spare part from the Piaggio brand. OEM part number for comparison purposes: CM001907
Available
€1.99
*
Mounting bracket Schmitt, universell
Universal with rubber buffer, e.g. for radiators, tanks, custom panels etc...
Available
€9.99
*
This item is an original spare part (OEM) of the brand Yamaha/Minarelli. The clip is used in various places for various bikes. An example on Yamaha motorcycles is the water pump. OEM part number for comparison purposes 990091040000,...
Available
€1.99
*
Needle roller bearing / Gearbox bearing / Shift drum bearing / Shaft bearing, universal, 10x10x14
This article is a cheap alternative to the expensive original spare part. The bearing corresponds to the original in shape, dimensions and connections. It can be used in different places of different bikes. OEM part number for comparison...
Available
€2.99
*
Gearbox bearing / Needle roller bearing / Shift shaft bearing, universell, 12x16x10
This item is a cheap alternative to the expensive original spare part. The bearing corresponds to the original in shape, dimensions and connections. It can be used in different places of different bikes. OEM part number for comparison...
Available
€2.99
*
Available
€2.12
*
Gasoline filter, Messing, 7,5mm
This fuel filter has a brass filter inside. This allows you to always see what is filtered. To install, simply split your fuel hose and insert the filter in the middle. Then you can secure the filter with clamps and you are done. Make...
Available
€1.99
*
Hose clamp for fixing the carburettor in the intake manifold or to fix air filter hoses or similar. Original Piaggio spare part, but universally applicable on any other vehicle model. OEM for comparison 842202
Out of Stock
€2.50
*
Rubber washer fairing screw, 5,5x14x1,5mm, 10 piece
Universal rubber rings for use under fairing screws. The rubber ring protects the paintwork / attachments from pressure points. 10 pieces of rubber rings 5,5x14x1,5mm are delivered.
Available
€2.99
*
This item is an original spare part (OEM) of the brand Piaggio. OEM part number for comparison purposes 2R000450 Scope of supply: 1 pc. front wheel left
Almost gone
€3.50
*
Spare part for Arrow exhaust systems.
Available
€9.99
*
Quick release fairing bolt set, 6mm, 10 stck.
Every owner of a racing bike knows how annoying it is to have to dismantle half the fairing for the smallest work steps on the moped. With this quick release set, the annoying screws of the past. The actual screws are provided with an...
Almost gone
€39.95
*
This item is an original spare part (OEM) of the brand Piaggio. OEM part number for comparison purposes 00H02810181, ODN00H02810181, 847545 Scope of delivery: 1 pc.
Available
€5.50
*
This item is an original spare part (OEM) of the brand Piaggio. OEM part number for comparison purposes 000H02810561, ODN00H02810561, 847541 Scope of delivery: 1 pc.
Available
€2.50
*
This item is an original spare part (OEM) of the brand Piaggio. OEM part number for comparison purposes 865736 Scope of delivery: 1 pc.
Almost gone
€19.99
*
Guide clip, universal, f. Cables and hoses
This is a(n) retaining clamp/guide clip for various cable guides on many bikes. Dimensions: - Material thickness: 5mm - Inside: 15mm - Outside: 20mm - Insertion length: 12mm OEM part number for comparison 00H02201591
Available
€2.49
*
Viewed