1. Choose model
RX/SX 125 (ab 2025, XS)
RX/SX 125 (2021 bis 2024, KT - Euro5)
RX 125 (2018 bis 2020, KXA - Euro4)
No results were found for the filter!
Spacers for handlebar clamps - So that you can also use them with a different handlebar thickness. For example, if you have 22mm handlebars but 28mm clamps , you can still use them together.
Available
€3.99
*
This intermediate tensioner is a practical accessory for adjustments or simply to adjust the tension of a Bowden cable. With a spring travel of 18 mm, it enables precise adjustment of the cable tension.
Available
€0.99
*
During maintenance work on the brake system, these small parts are often lost. The bleeder nipple can then become clogged and maintenance of the brake system becomes impossible the next time. A cover should therefore always be installed!
Available
€2.99
*
6mm clamp for fuel hoses. Delivered is 1 piece.
Available
€1.99
*
Hose clamps can be used in almost any application. Whether as reinforcement of the rubber mountings of the exhaust, or as a normal water hose clamp.
Available
€1.29
*
NEW
Bei diesem Artikel handelt es sich um ein Originalersatzteil (OEM) der Firma Aprilia OEM Artikelnummer zu Vergleichszwecken : 00H00202101 Lieferumfang: 1
Out of Stock
€3.99
*
NEW
This item is an original replacement part (OEM) from Aprilia OEM part number for comparison purposes : AP8152273 Scope of delivery: 1
Out of Stock
€2.99
*
NEW
This item is an original replacement part (OEM) from Yamaha OEM part number for comparison purposes : 901791400100 Scope of delivery: 1
Out of Stock
€6.99
*
NEW
This item is an original replacement part (OEM) from Aprilia OEM part number for comparison purposes : 2R000435 Scope of delivery: 1
Out of Stock
€2.29
*
NEW
This item is an original replacement part from Aprilia OEM part number for comparison purposes : CM314101 Scope of delivery: 1
Available
€18.95
*
NEW
This item is an original replacement part (OEM) from Aprilia/Piaggio. OEM item number for comparison purposes 2R000475 Scope of delivery: 1 piece
Almost gone
€11.99
*
NEW
This item is an original replacement part (OEM) from Aprilia/Piaggio. OEM item number for comparison purposes 2R000476 Scope of delivery: 1 piece
Almost gone
€4.99
*
NEW
This item is an original Aprilia Standard M5 sheet metal nut replacement part for fastening most common fairing screws.
Available
€1.99
*
NEW
This item is an original replacement part (OEM) from Aprilia. OEM item number for comparison purposes: 00H01600911 Scope of delivery: 1 piece.
Available
€1.99
*
Retaining rubber radiator, Outer diameter 23.5 mm x inner diameter 11 mm x height 10 mm
This rubber bushing for the radiator bracket is used for secure and low-vibration mounting of the radiator. It effectively absorbs vibrations and thus protects the radiator from damage. Thanks to the elastic material, it fits perfectly...
Available
€3.99
*
Rubber grommets assortment, 180-piece
More protection, less stress during installation. With this 180-piece rubber grommet set, you get everything you need to route cables cleanly through metal sheets - without any sharp edges or vibrations. The open grommets effectively...
Almost gone
€11.99
*
Assortment box for shaft retaining rings BGS, Outer rings 8-19mm 78-piece
A must for anyone who likes to do their own work in the garage or workshop. Assortment consisting of 78 parts. Outer shaft retaining rings including fan box. Scope of delivery: 20 circlips Ø 8 mm 20 circlips Ø 10 mm 16 Ø 12 mm circlips...
Available
€6.99
*
This item is an original spare part from the Piaggio brand. OEM number for comparison purposes: 00F01500021
Available
€4.99
*
Bei diesem Artikel handelt es sich um ein Originalersatzteil der Marke Piaggio. OEM-Nummer zu Vergleichszwecken: 00D01500021
Available
€10.99
*
Domino throttle cable nipple, universell
This is a spare part for many common throttle cables. Dimensions: 5.5mm x 7.5mm
Available
€1.99
*
Kickstarter Rubber, universal, black
If your bike's kickstarter works but slips every time you kick it, then it's time for a kickstarter rubber. This universal part, in simple black, ensures that you have a secure grip again when starting your moped. Whether you're riding...
Available
€2.99
*
This article is an original spare part from Aprilia OEM part number for comparison purposes : 2R000049 Scope of delivery: 1
Available
€2.99
*
This item is an original spare part from the Piaggio brand. OEM part number for comparison purposes: CM001907
Available
€1.99
*
Mounting bracket Schmitt, universell
Universal with rubber buffer, e.g. for radiators, tanks, custom panels etc...
Almost gone
€9.99
*
Viewed