1. Choose model
RX/SX 125 (ab 2025, XS)
RX/SX 125 (2021 bis 2024, KT - Euro5)
SX 125 (2018 bis 2020, KXB - Euro4)
SX 125 (2008 bis 2014)
2. Filter by category
No results were found for the filter!
Ball bearing / wheel bearing, Type: 6005 2RS
Single ball bearing / wheel bearing for various vehicles. Please compare the bearing sizes with the standard bearings of your bike before ordering. Technical data Inner diameter: 25mm Outer diameter: 47mm Width: 12mm Sealed on both sides
Available
€2.99
*
Einzelnes Radlager für die Hinterradfelge von bspw. Aprilia RX/SX 125. Für den fachgerechten Austausch müssen unbedingt beide Lager der Hinterachse erneuert werden! Daher bitte 2 Stück bestellen! OEM Artikelnummer zu Vergleichszwecken...
Available
€12.95
*
Mounting bracket Schmitt, universell
Universal with rubber buffer, e.g. for radiators, tanks, custom panels etc...
Available
€9.99
*
Incl. sealing ring. OEM part number for comparison purposes Aprilia / Piaggio: 826165
Available
€17.90
*
Standard M5 sheet metal nut for fastening most common fairing screws.
Available
€1.99
*
Locking bolt cylinder head Most Racing, M14x1,5, versch. Colors
This high quality aluminum sealing bolt with thread size M14x1.5 and matching copper sealing ring is an indispensable accessory for anyone looking for a reliable and durable sealing bolt. With its versatility, this bolt is perfect for...
Available
€17.95
*
;
From €12.56
*
Locking bolt cylinder head Most Racing, M12x1,5, versch. Colors
The aluminum locking bolts with thread size M12x1.5 and matching copper sealing ring are the perfect solution for closing holes, such as the temperature sensor hole on Derbi Euro4 models. Of course, the bolt is also suitable for other...
Available
€17.95
*
;
From €12.56
*
Hollow head screw, Magnetic, black, various Versions
Dimensions: M8X1.25 -20mm M8X1.25 -25mm M8X1.25 -35mm M10X1.25 -16mm M10X1.5 -15mm M10X1.5 -22mm M12X1.25 -10mm M12X1.5 -15mm M12X1.5 -12mm M8X1.5 -16mm M8X1.25 -15mm Scope of delivery: incl. copper gasket
Available
€11.99
*
;
From €9.59
*
Needle roller bearing / Gearbox bearing / Shift drum bearing / Shaft bearing, universal, 10x10x14
This article is a cheap alternative to the expensive original spare part. The bearing corresponds to the original in shape, dimensions and connections. It can be used in different places of different bikes. OEM part number for comparison...
Available
€2.99
*
Gearbox bearing / Needle roller bearing / Shift shaft bearing, universell, 12x16x10
This item is a cheap alternative to the expensive original spare part. The bearing corresponds to the original in shape, dimensions and connections. It can be used in different places of different bikes. OEM part number for comparison...
Available
€2.99
*
This article is an original spare part (OEM) from Aprilia OEM part number for comparison purposes : PIA-AP8101927 Scope of delivery: 1
Out of Stock
€4.33
*
This item is an original spare part (OEM) from Aprilia OEM part number for comparison purposes : PIA-AP8101743 Scope of delivery: 1
Out of Stock
€6.13
*
This article is an original spare part (OEM) from Aprilia OEM part number for comparison purposes : PIA-AP8120536 Scope of delivery: 1
Out of Stock
€6.56
*
This item is an original spare part (OEM) from Aprilia OEM part number for comparison purposes : PIA-AP8101588 Scope of delivery: 1
Out of Stock
€13.59
*
This article is an original spare part (OEM) from Aprilia OEM part number for comparison purposes : PIA-AP8101573 Scope of delivery: 1
Out of Stock
€3.38
*
This article is an original spare part (OEM) from Piaggio OEM part number for comparison purposes : PIA-CM001909 Scope of delivery: 1
Available
€2.12
*
This article is an original spare part (OEM) from Piaggio OEM part number for comparison purposes : PIA-B016808 Scope of delivery: 1
Available
€1.49
*
Crankshaft bearing set, Rotax 122/123, Aprilia RS 125, RX/SX 125
Replacement crankshaft bearings for the Rotax 122 & 123 engine. Scope of delivery Incl. both main bearings, a new piston pin bearing and the two crankshaft seal rings. Bearing type: 6206 C3
Almost gone
€41.95
*
Thread repair insert, M14 for thread spark plug / cylinder head
Thread insert - also known as threaded bush - for repairing defective spark plug threads M14x12.7mm on the cylinder head. The defective original thread is extended to M18. To do this, the old thread is drilled out to 16.5mm with a drill...
Available
€4.99
*
Replacement spring for preloading the rider footrest. This spring is needed to ensure the automatic unfolding of the footrest. This item is a original spare part (OEM) of the manufacturer of the brand Piaggio.
Available
€3.99
*
The cross-head of the coupling screws is known to quickly spin out. At some point it becomes difficult to unscrew or properly tighten the screws at all. The only remedy is new screws. Here we can offer a set consisting of 5 pcs. original...
Available
€3.99
*
Cap nuts / trim nut set, M7, 4 Stck
These nuts are suitable for use as cylinder head nuts, for example.
Available
€5.99
*
Hose clamp for fixing the carburettor in the intake manifold or to fix air filter hoses or similar. Original Piaggio spare part, but universally applicable on any other vehicle model. OEM for comparison 842202
Out of Stock
€2.50
*
For fairing parts Screw with flange / collar for fairing parts. Original spare part from Piaggio. OEM number: 575249 This screw is of course also very suitable for the fairing of other vehicle brands. Dimensions: Thread: M6 Length: 22mm
Available
€0.99
*
Viewed