Tip Use our  Bike-Filter to get only suitable articles displayed.
0 Article
 

Beta RR 125 4T Suction & injection system

1. Choose model
RR 125 T 4T LC (ab 2025, ZD3EH110)
RR T 125 4T LC (2023 bis 2024, ZD3EH100)
RR 125 R 4T LC (ab 2025, ZD3EH15 (Euro5+))
RR R 125 4T LC (2024 bis 2024, ZD3EH14)
RR 125 4T LC (2021 bis 2023, ZD3EH14)
RR 125 4T LC (2017 bis 2020, ZD3E9143)
RR 125 4T LC (2013 bis 2016, ZD3E4000)
Close filters
1 From 2
No results were found for the filter!
Injector / Injector Motoflow
Injector / Injector Motoflow, Yamaha YI-5 Motor
Improve the performance of your YI 5 engine with this high quality fuel injector. Designed to ensure precise fuel metering, it provides optimal combustion and improved engine performance. The valve is specifically designed for YI 5...

Available

€49.95 *
Fuel tap Original Replica
Fuel tap Original Replica, Vacuum, universal
Here we offer a vacuum fuel tap for all motorcycle models with carburetor. The fuel tap is simply pushed into the tank instead of the old one and can also be used to convert from manual operation to automatic operation. We recommend to...

Available

€8.99 *
Manual choke cable
Manual choke cable, universal, anodized handle
Here we offer a simple choke, with an actuator, which can be installed in the fairing of the vehicle as desired. The lever is delivered with a cable pull, can only be used in vehicles with carburetor.

Available

€12.99 *
Clamp
Clamp, universal, for example f. petrol, water or oil hoses, 6mm
6mm clamp for fuel hoses. Delivered is 1 piece.

Available

€1.99 *
Fuel Hose
Fuel Hose, 1 meter, d=5mm, different colours
Fuel hose with one meter length and 5mm inner diameter. In many different colours. In addition to its actual use as a petrol hose, it can also be used as a hose for many other purposes. Available in many different colours. The hose can...

Available

€2.00 *
NEW
Tuning ECU Malossi
Tuning ECU Malossi, Beta RR 125 from year 21, Fantic Caballero, XEF, XMF 125 from year 21 (Yamaha YI-5 Engines)
More power, better response and maximum control - with the Malossi Force Master 2.1 you can get the full potential out of your 125. This programmable ignition box was specially developed for the current Euro 5 and Euro 5+ engines from...

Out of Stock

€398.99 *
NEW
Cylinder kit 183cc & Tuning ECU Malossi
Cylinder kit 183cc & Tuning ECU Malossi, Beta RR 125 from year 21, Fantic Caballero, XEF, XMF 125 from year 21...
Malossi 183 cc performance kit - more power for Beta & Fantic 125 4T The set combines the Malossi 183 cc cylinder kit with the Force Master 2.1 ECU - perfectly tuned for the Beta RR and Fantic 125 4-stroke models from 2021. The aluminium...

Out of Stock

€759.90 *
NEW
ECU Chiptuning Modul Racedynamics Powertronic V4 ECU Chiptuning Modul Racedynamics Powertronic V4, Beta 125 RR 4T 2020-2022
Want to get more out of your Beta 125 RR 4T? Then the PowerTRONIC V4 is just the upgrade you've been waiting for. This smart piggyback ECU is packed with high-end functions and can be installed in just a few minutes - without any...

Out of Stock

€399.90 *
NEW
Manual choke cable Motoforce Manual choke cable Motoforce, PWK / CP / Flat Slide carburetor, red
The manual choke for PWK and Polini CP carburetors gives you full control over the cold start of your scooter or moped. Instead of relying on an automatic choke, you can now adjust the fuel/air mixture manually. This ensures reliable...

Out of Stock

€6.90 *
NEW
Beta OEM air intake
Beta OEM air intake, Beta RR 125 from year 21
More style and fresh air for your Beta: With the black air intake, you not only add a visual eye-catcher to your bike, but also ensure a reliable air supply. As an original Beta part, the air intake fits perfectly - no need to adjust it,...

Almost gone

€3.99 *
Fuel hose / petrol hose Fuel hose / petrol hose, 1m, neoprene, rubber compound, various diameters
Fuel hose / Petrol hose In the following variants: 6mm 7mm 8mm Length : 1m

Available

From €14.99 *
Fuel filter Fuel filter, 7mm, various colors
The aluminum elements of this fuel filter are available in different colors. This allows the filter and hoses to be visually matched. The connection width of the filter is 7 mm. The fuel hoses we offer are therefore a perfect fit.

Available

€9.99 *
Drossel flap sensor Drossel flap sensor, Yamaha YI 5 Motoren
Optimize the performance of your Yamaha vehicle with our high-quality throttle position sensor , specially developed for models with YI5 engines. This precision-manufactured replacement part ensures accurate detection of the throttle...

Out of Stock

€29.95 *
FORCE MASTER 2.1 control unit
FORCE MASTER 2.1 control unit, Beta RR Enduro/Motard 125 / Fantic Caballero, XMF 125, 4T LC from year 2021, E5
The Malossi Force Master 2.1 control unit boasts a completely new design and is therefore much easier to configure. User-friendliness is a major concern for Malossi, and the Force Master 2.1 is a prime example of this: it is modern,...

Out of Stock

€409.90 *
Inlet pipe UMA
Inlet pipe UMA, YI 3 motors, 34mm
Imported from Malaysia to offer the best possible performance, the intake manifold from UMA Racing . The UMA intake manifold is the ideal solution for Minarelli YI 3 engines with a diameter of 34 mm and 2-point input , especially for the...

Almost gone

€56.95 *
Intake manifold UMA
Intake manifold UMA, Yamaha Yzfr / Mt 125, 32mm
The UMA intake manifold with 32 mm is an essential attachment part for your Yamaha Yzfr or Mt 125. It is important not to skimp on essential parts for the quality of the gasoline-air mixture and thus an optimal power development. The UMA...

Almost gone

€54.95 *
Air filter connection UMA
Air filter connection UMA, YZFR 125, 34mm joint
The UMA air filter connection is an essential component for your Yamaha YZFR 125. It is responsible for ensuring an optimal gasoline-air mixture. So, in order to burn the gasoline efficiently, it is important that everything is tight and...

Out of Stock

€32.95 *
Inlet pipe UMA
Inlet pipe UMA, Yamaha Mt/Yzfr/Wr 125, Beta RR 125, Fantic Caballero 125, 34mm
The UMA intake manifold for the YI engines is an essential part for the cylinder. It injects the fuel&air and ensures an optimal gasoline-air mixture. It is virtually the A and O for the optimal power development. That's why you...

Available

€54.95 *
Intake manifold UMA
Intake manifold UMA, YI4, 5 engines, 34mm
34mm intake manifold from UMA-Racing, imported for you from faraway Malaysia. The intake manifold with 34mm is especially in conjunction with the 34mm throttle body from UMA-Racing an outstanding investment in your 125 Yamaha. The intake...

Available

€54.95 *
Float chamber drain plug Float chamber drain plug, PWK Carburetor, Orange
Simple styling part for flat slide and type PWK carburetor. The screw is made of anodized aluminum. Delivery Incl. gasket

Available

€6.00 *
Oil hose Oil hose, 2,2x4mm, 5m long, green, universal
Here we offer you a transparent green oil hose. Dimensions: Inner diameter: 2,2mm Outer diameter: 4mm Length: 5m

Available

€3.49 *
Oil hose Oil hose, 2,5x5mm, 5m long, green, universal
Here we offer you a transparent green oil hose. Dimensions: Inner diameter: 2,5mm Outer diameter: 5mm Length: 5m

Available

€3.99 *
choke lever choke lever, Universal, various colors, for mounting on handlebars
Universal choke lever for custom conversions. Simple mounting with clamp, directly on the handlebars as mentioned, fits virtually any cable choke. Available in black & chrome.

Available

€10.99 *
Carburettor DellOrto PHBH 28 BS Carburettor DellOrto PHBH 28 BS, universal
The PHBH 28mm version can be used as a replacement carburettor on various 125cc vehicles (e.g. RS 125). On 125s with a smaller carburettor, it can even have a slight performance-enhancing effect if tuned correctly. Note Does NOT have an...

Out of Stock

€139.90 *
1 From 2
Viewed