Tip Use our  Bike-Filter to get only suitable articles displayed.
0 Article
 

Derbi Senda 125 Chain spare parts

1. Choose model
Senda DRD 125 (2010 bis 2016, DR/PK)
Close filters
No results were found for the filter!
Screw
Screw, M6 x 20 mm, flat head / inner corner (Torx), stepped
Typical brake disks, or sprocket bolt with blue dry thread lock (medium strength). Can also be used anywhere else on the moped. Thread: M6 Head: Flat / Torx Length: 20 mm

Available

€1.99 *
Chain Pulley
Chain Pulley, universal, D=42mm
Universal deflection/guide roller for mounting on the swing arm D=42mm.

Available

€10.99 *
Chain Pulley
Chain Pulley, universal, D=32mm
Universal deflection/guide roller for mounting on the swing arm D=32mm.

Available

€8.49 *
Pinion mounting set Pinion mounting set, 87141090
Pinion mounting set Aprilia OEM OEM part number: 00000004510 00H02810421 AP8150284

Available

€6.99 *
Locking plate chain sprocket Locking plate chain sprocket, Derbi Senda, Aprilia RX/SX Bj. 00-10, Aprilia RS 50 06-17/125 Bj. 11-20
Pinion locking plate with M4x10mm screws for Derbi Senda and Aprilia SX geared mopeds. This locking plate for the pinion is comparable to the OEM number 00H02810421. Scope of delivery as shown in the product image.

Available

€2.99 *
Pinion cover Aprilia OEM
Pinion cover Aprilia OEM, Aprilia M545 Engine
This item is an original spare part (OEM) from Aprilia. OEM part number for comparison purposes: 863250 Scope of delivery: 1

Almost gone

€29.95 *
Screw / Sprocket bolt Screw / Sprocket bolt, M6x20 (DIN933), universal, 6 stck.
In the end it is a normal M6 8.8 DIN screw. Therefore it can be used almost universally. Here we offer a set of 6 screws. Scope of delivery: 6 pcs.

Available

€10.99 *
Pack of 5 screws Pack of 5 screws, M6 x 20 mm, flat head / inside corner (Torx), stepped
Typical brake disks, or sprocket bolt with blue dry thread lock (medium strength). Can also be used anywhere else on the moped. Thread: M6 Head: Flat / Torx Length: 20 mm

Available

€9.99 *
Screw Screw, M6, with collar, pack of 4
Collar screw with M6 thread and 16mm length is idr. used as brake disk screw. But it can also be used for everything else. Thread: M6 Head: 6 Kant length: 16 mm

Available

€5.49 *
Screw, sprocket / brake disk Screw, sprocket / brake disk, M8 x 18 mm, flat head / hexagon socket (TX), stepped
These bolts are usually used as brake disk or sprocket bolts. Incl. dry threadlocker (blue - medium strength). Thread: M8 Head: Flat / TX Length: 18 mm

Out of Stock

€2.49 *
Chain wheel bolt Chain wheel bolt, universal, M8x1,25x40mm
Stud bolt for universal use. Used on some vehicles, e.g. for fastening the chain wheel. (Yamaha MT 125 & YZF-R 125)

Available

€3.99 *
Viewed