1. Choose model
Ninja 125 (ab 2023, BR/BP)
Ninja 125 (2021 bis 2022, MF - Euro5)
Ninja 125 (2019 bis 2020, KFA - Euro4)
No results were found for the filter!
Spacers for handlebar clamps - So that you can also use them with a different handlebar thickness. For example, if you have 22mm handlebars but 28mm clamps , you can still use them together.
Available
€3.99
*
During maintenance work on the brake system, these small parts are often lost. The bleeder nipple can then become clogged and maintenance of the brake system becomes impossible the next time. A cover should therefore always be installed!
Available
€2.99
*
6mm clamp for fuel hoses. Delivered is 1 piece.
Available
€1.99
*
Hose clamps can be used in almost any application. Whether as reinforcement of the rubber mountings of the exhaust, or as a normal water hose clamp.
Available
€1.29
*
NEW
Retaining rubber radiator, Outer diameter 23.5 mm x inner diameter 11 mm x height 10 mm
This rubber bushing for the radiator bracket is used for secure and low-vibration mounting of the radiator. It effectively absorbs vibrations and thus protects the radiator from damage. Thanks to the elastic material, it fits perfectly...
Available
€3.99
*
NEW
Rubber grommets assortment, 180-piece
More protection, less stress during installation. With this 180-piece rubber grommet set, you get everything you need to route cables cleanly through metal sheets - without any sharp edges or vibrations. The open grommets effectively...
Out of Stock
€11.99
*
NEW
Assortment box for shaft retaining rings BGS, Outer rings 8-19mm 78-piece
A must for anyone who likes to do their own work in the garage or workshop. Assortment consisting of 78 parts. Outer shaft retaining rings including fan box. Scope of delivery: 20 circlips Ø 8 mm 20 circlips Ø 10 mm 16 Ø 12 mm circlips...
Available
€6.99
*
Domino throttle cable nipple, universell
This is a spare part for many common throttle cables. Dimensions: 5.5mm x 7.5mm
Available
€1.99
*
Kickstarter Gummi, universell, schwarz
Wenn der Kickstarter deines Bikes zwar funktioniert, aber bei jedem Tritt zur rutschigen Rutschpartie wird – dann wird’s Zeit für einen Kickstarter-Gummi. Dieses universelle teil, in schlichtem Schwarz, sorgt dafür, dass du wieder...
Available
€2.99
*
Color/ Green Set includes - 1x oil seal 37 x 50 x 11 - 1x dust cap 37 x 50.3 x 5.6 SKF fork oil seal When developing the fork oil seals, SKF placed particular emphasis on sealing performance. This means that the highest quality materials...
Almost gone
€39.95
*
Throttle cable intermediate tensioner, universell
This intermediate tensioner is a practical accessory for adjustments or simply to adjust the tension of a Bowden cable. With a spring travel of 18 mm, it enables precise adjustment of the cable tension.
Out of Stock
€1.50
*
Mounting bracket Schmitt, universell
Universal with rubber buffer, e.g. for radiators, tanks, custom panels etc...
Almost gone
€9.99
*
Gearbox bearing / Needle roller bearing / Shift shaft bearing, universell, 12x16x10
This item is a cheap alternative to the expensive original spare part. The bearing corresponds to the original in shape, dimensions and connections. It can be used in different places of different bikes. OEM part number for comparison...
Available
€2.99
*
Hose clamp for fixing the carburettor in the intake manifold or to fix air filter hoses or similar. Original Piaggio spare part, but universally applicable on any other vehicle model. OEM for comparison 842202
Almost gone
€2.50
*
Rubber washer fairing screw, 5,5x14x1,5mm, 10 piece
Universal rubber rings for use under fairing screws. The rubber ring protects the paintwork / attachments from pressure points. 10 pieces of rubber rings 5,5x14x1,5mm are delivered.
Available
€2.99
*
This item is an original spare part (OEM) of the brand Kawasaki. OEM part number for comparison purposes 921521758 Scope of delivery: 1 pc.
Almost gone
€13.67
*
;
€9.95
*
Fits ArtNo: 340280035This item is an original spare part (OEM) of the brand Kawasaki . OEM part number for comparison purposes 340280056 Scope of delivery: 1 pc.
Out of Stock
€14.73
*
Fitting sleeves are used to mount parts such as cylinder head & cylinder exactly centered on each other. From our experience, we know that in the case of a quick botch is often dispensed with fitting sleeves. This often results in leaks...
Available
€4.11
*
This article is an original spare part (OEM) of the manufacturer of the brand Kawasaki.
Available
€2.99
*
Guide clip, universal, f. Cables and hoses
This is a(n) retaining clamp/guide clip for various cable guides on many bikes. Dimensions: - Material thickness: 5mm - Inside: 15mm - Outside: 20mm - Insertion length: 12mm OEM part number for comparison 00H02201591
Available
€2.49
*
18mm hose clamp from Piaggio, can of course be used on all vehicles. OEM part number for comparison purposes 879888; 256074; 577557; AP8104072
Available
€4.99
*
Available
€6.49
*
Available
€1.49
*
Available
€1.99
*
Viewed