1. Choose model
Duke 125 (ab 2024)
Duke 125 (2021 bis 2023, IS DUKE - Euro5)
Duke 125 (2017 bis 2020, IS DUKE - Euro4)
Duke 125 (2011 bis 2016, Euro3)
No results were found for the filter!
This simple but effective clamp can increase your handlebar intake on almost all bikes! made of high quality CNC aluminum Handlebar mounts for Ø22 mm handlebars Increase the handlebar by about 20mm
Available
€29.95
*
An aluminum CNC machined brake fluid reservoir cap that fits your Duke like a glove. In a Duke-like orange, it's a stylistically fitting lid for the brake fluid reservoir.
Available
€12.99
*
An aluminum CNC machined brake fluid reservoir cap that fits your Duke like a glove. In a Duke-like orange, it's a stylistically fitting lid for the brake fluid reservoir.
Available
€10.99
*
Almost gone
€39.95
*
Herewith you get a color matching your bike brake fluid reservoir with CNC cap. The attachment takes place directly on the tank. The cap comes incl. seal, clamps and hose. In addition, the tank (∅42mm) has the typical level indicators...
Available
€9.99
*
With the lever protectors of Motoflow you effectively protect your levers and or hand from bending such as in a fall. The protectors are available in 2 different colors.
Available
€39.95
*
With the Motoflow handlebar clamps you give your handlebar an extra look through the red CNC machined aluminum. Your handlebar is raised a few centimeters, which can improve posture and thus prevent back pain. Due to the inner diameter...
Available
€29.95
*
The illuminated ring for the ignition lock of the KTM Duke/RC 125 gives your motorcycle a visual eye-catcher. This ring is designed for the ignition lock of the KTM Duke/RC 125 and provides a reference point for the ignition lock even in...
Available
€14.99
*
Tire valve caps from Radical Racing with a sporty and modern design.
Available
€5.49
*
Motocross footpegs with widened contact area and improved grip. Made of CNC machined and anodized aluminum. The footrests are supplied together with the footrest adapters known from Radical. The rests are then bolted directly to the...
Available
€39.95
*
Herewith comes a new color matching grille for your KTM! It is, from one piece CNC machined aluminum. Scope of delivery The scope of delivery includes washers and a spacer tape.
Available
€29.95
*
Herewith comes a new, color matching handlebar clamp for your KTM! It is, from one piece CNC machined aluminum. Scope of delivery In the scope of delivery are 4 screws. But you can theoretically also use the original.
Available
€29.95
*
Herewith come new color matching brake cylinder covers for your KTM! Note No seal and no screws are supplied! The original mounting materials can still be used.
Available
€19.99
*
Herewith come new, color matching chain tensioner for your KTM! It is, from one piece CNC machined aluminum. Scope of delivery
Available
€19.99
*
Color matching, CNC milled 28.5mm handlebar mounts for the perfect finish on your bike! The mount is completely CNC machined and anodized afterwards. Available in different colors. Scope of delivery: 2pcs.
Available
From €29.90
*
Simple handlebar grip rubbers with optional red or black anodized sleeves on the front and rear part of the handle. The rubbers are medium soft and thus universally applicable. The assembly is quite Simpel. The indicated handlebar ends...
Available
€20.95
*
Brake cylinder cover Radical Racing, universal, versch. Colors, rear
Matching the various other engine styling parts from Radical Racing, herewith also comes a fully enclosing rear brake cylinder guard. incl. mounting material
Available
From €17.99
*
Cheap brake and clutch lever set from Motoflow, available in 2 different colors The levers are ready for assembly, but without KB number.
Available
€39.95
*
;
€24.95
*
Aluminum fairing screws from Motoflow, in colored anodized finish. The screws are provided with wide lens head and a hexagon socket. So the fairing holds securely in place. Since it is aluminum, these screws are not suitable for high...
Available
€3.99
*
Brake & clutch lever guards are used on racing motorcycles similar to handguards on motocross bikes. However, they are intended less to protect the hands from mud and debris and more to protect the levers from a fall. That way, if the...
Available
€29.99
*
Oil filler plug for KTM models. The main purpose of the screw is to provide access to the gearbox and engine so that oil can be filled in. In this case, however, it looks visually more appealing than the simple original.
Available
€9.99
*
125 levers with ABE are the exception on the market. The often much cheaper products from Asia are of course not allowed on the vehicle. We can now offer here but in addition to these, much cheaper levers also a "V2" - premium variant,...
Available
€99.95
*
We offer a complete set consisting of adjustable brake lever and clutch lever armature. Also included is a master cylinder for hydraulic brakes. The individual parts of the set are mostly CNC milled and have an extremely attractive...
Available
€99.90
*
;
€69.90
*
Vibration dampers are actually used to reduce vibrations in the steering tube, since these vibrations are only very slightly pronounced in the 125 class motorcycles anyway, it is not necessary to perform vibration dampers as absorber...
Available
€14.99
*
;
From €9.99
*
With CNC parts you have the opportunity to create with minimal effort an individual look to your KTM Duke 125 to create. Parts like, Öleinfüllschrauben, brake cylinder cover, chain protector or even sprocket cover & motorcycle covers from CNC are mounted or replaced in a few minutes. Even more the parts, compared with a tuning exhaust system or a größeren cubic kit, significantly cheaper.
Apart from the erwähnten points CNC optics parts offer a much higher quality appearance than the Standard parts of the Duke 125. We ourselves offer our own parts from Radical Racing only after strict quality control. quality control. So in addition to fit and visual impact, we also check function! For example the brake cylinder covers have a hole to prevent a vacuum in the reservoir, just like the original cover. can arise.
In addition, there are also a variety of different colors, so you also the right CNC parts matching the color of your motorcycle have.
Viewed