1. Choose model
Duke 125 (ab 2024)
Duke 125 (2021 bis 2023, IS DUKE - Euro5)
Duke 125 (2017 bis 2020, IS DUKE - Euro4)
Duke 125 (2011 bis 2016, Euro3)
No results were found for the filter!
Fits 28.5mm handlebars. The handlebar is quite flat on this version. Of course, there is also the matching intake or the matching adapter for the standard 22mm handlebar mounts. The intake is completely CNC machined and anodized...
Available
€29.95
*
Vibration dampers are actually used to reduce vibrations in the steering tube, since these vibrations occur only very slightly on most 125s anyway, it is not necessary to design vibration dampers as absorber weights. Here we can offer...
Available
€17.99
*
;
€12.99
*
CNC machined brake fluid reservoir from Motoflow. Available in different colors.
Available
€19.95
*
Among our handlebar attachments is also a cover for the front brake cylinder. The cover consists of 2 parts, which are connected by the mounting screws. Both parts were CNC-milled and are made of aluminum. The cover is available in 3...
Available
From €19.90
*
Tank ventilation hose with coloured anodised end cap
Available
From €3.99
*
Footrest adapter pair from Radical Racing. These adapters allow Radical footrests to be attached to the vehicle. Suitable for all KTM Duke & RC models from 2011. Scope of delivery 1 pair of footrest adapters Mounting screws Footrests are...
Available
€22.95
*
From Radical Racing we can offer different color anodized aluminum footrests. The footrests are simply exchanged against the originals. The assembly can be done within about 10 minutes and is quite simple. The footrests are delivered...
Available
€39.95
*
Spare footrest pair from Radical. Can be mounted on Radical Racing footrest adapters. Note Delivery WITHOUT footrest adapter!
Available
€22.95
*
These swingarm sliders can be mounted on the swingarm of the KTM Duke and protect the swingarm in case of a fall at particularly vulnerable points.
Available
€20.95
*
Styling adapter plate for the vehicle stand made of CNC milled aluminium. Anodized in black and orange and therefore perfectly matched to your KTM Duke! Easy mounting and quick optical upgrading. In addition, the footprint is increased...
Available
€21.95
*
Stand mounts are used to use motorcycle paddock stands with claw mounts. The stand holders are 2-part black and orange anodized.
Available
€12.90
*
Simple CNC milled styling part for KTM Duke or RC 125, the screw is located at the top of the clutch housing. Great optical effect for a small budget!
Available
€13.99
*
Shift- and foot brake lever set from Motoflow, suitable for KTM Duke 125. Both levers are milled from aluminium and anodized in two colours. This makes them the perfect eyecatcher on the KTM Duke.
Available
€41.95
*
CNC milled cover of the water tank incl. seal. Anodized orange. Dimensions thread: 21mm height: 16mm Outside diameter: 22mm
Available
€15.95
*
Cheap part that will attract a lot of attention. This screw cap is suitable for the rear brake fluid reservoir of the KTM Duke 125, or the front reservoir of the Aprilia RS 125 and can be fitted in less than a minute. Note: The seal of...
Available
€18.95
*
;
From €9.99
*
Here we have an oil filler plug for you, which you can easily exchange for the boring original from KTM. The assembly is of course very simple: old out, new in. You won't even need tools. The screw consists of two individual parts,...
Available
€14.99
*
;
From €10.99
*
Here we offer hand levers in a slightly shortened "Shorty" version. The levers do not affect the comfort while braking and clutch operation. Even the force to be applied during clutch operation does not have to be increased noticeably....
Available
€79.95
*
;
€59.95
*
As a little gimmick we can offer a CNC manufactured adjusting screw for e.g. clutch cables. The adjusting screw fits on all vehicles with M8 adjusting device.
Out of Stock
€12.95
*
NEW
Hier haben wir neue Lenkerenden von Puig, den SPEED. Aus einem Aluminiumblock gefräst und in sieben verschiedenen Farben für euch zur auswahl. Das Design verbindet die Einfachheit der Linien und den Minimalismus des Renn Charakters mit...
Available
€29.95
*
NEW
Hier haben wir neue Lenkerenden von Puig, den SHORTY. Aus einem Aluminiumblock gefräst und in sieben verschiedenen Farben für euch zur auswahl. Das Design verbindet die Einfachheit der Linien und den Minimalismus des Renn Charakters....
Available
€29.95
*
This headlight bracket is an essential part for mounting the universal LED headlight from Puig. It is made of high-quality CNC-milled aluminum and is therefore very robust and durable. In black, it matches the headlight very well and...
Almost gone
From €145.90
*
Universal lever guard from VOCA Racing. This type of lever guards is mandatory for safety reasons in MotoGP and other categories of the world of motorcycling. They are 100% recommended for racing, but can also be used on the road. They...
Available
€69.95
*
The lever protection set serves to protect the lever from breaking or bending when falling. The set is made of sturdy aluminum and therefore provides effective protection against falls.
Out of Stock
€44.95
*
Brake cylinder Most, universal, 22mm, front, versch. Colors
MOST Racing hereby offers a radial CNC brake cylinder anodized in your favorite color! The assembly is very easy and fits all 22mm handlebars. Technical data: Type 3 or 4 fingers Adjustable Breakage protection Piston diameter 17.5 For...
Available
€99.95
*
With CNC parts you have the opportunity to create with minimal effort an individual look to your KTM Duke 125 to create. Parts like, Öleinfüllschrauben, brake cylinder cover, chain protector or even sprocket cover & motorcycle covers from CNC are mounted or replaced in a few minutes. Even more the parts, compared with a tuning exhaust system or a größeren cubic kit, significantly cheaper.
Apart from the erwähnten points CNC optics parts offer a much higher quality appearance than the Standard parts of the Duke 125. We ourselves offer our own parts from Radical Racing only after strict quality control. quality control. So in addition to fit and visual impact, we also check function! For example the brake cylinder covers have a hole to prevent a vacuum in the reservoir, just like the original cover. can arise.
In addition, there are also a variety of different colors, so you also the right CNC parts matching the color of your motorcycle have.
Viewed