1. Choose model
RST 125 (ab 2019)
No results were found for the filter!
The connection width of the filter is 5-6 mm. Thus, the gasoline hoses that we offer are a perfect fit. Inside is a durable lamellar filter. ⚠️Bitte Note flow direction - arrow is printed on.⚠️
Available
€2.99
*
6mm clamp for fuel hoses. Delivered is 1 piece.
Available
€1.99
*
Fuel hose with one meter length and 5mm inner diameter. In many different colours. In addition to its actual use as a petrol hose, it can also be used as a hose for many other purposes. Available in many different colours. The hose can...
Available
€2.99
*
Haltesystem für den Injektor von Aprilia 125cc 4-T Motoren. OEM Artikelnummer zu Vergleichszwecken Piaggio / Aprilia: 1A011529
Almost gone
€29.94
*
Oil hose, 2,2x4mm, 5m long, green, universal
Here we offer you a transparent green oil hose. Dimensions: Inner diameter: 2,2mm Outer diameter: 4mm Length: 5m
Available
€3.49
*
Oil hose, 2,5x5mm, 5m long, green, universal
Here we offer you a transparent green oil hose. Dimensions: Inner diameter: 2,5mm Outer diameter: 5mm Length: 5m
Available
€3.99
*
Gasoline filter, Nylon, 6mm
This fuel filter has a bright nylon filter inside. This allows you to always see what is filtered. To install, simply split your fuel hose and insert the filter in the middle. Then you can secure the filter with clamps and you are done....
Available
€1.99
*
Replacement fuel injector from Piaggio. Suitable for 125cc 4-T Aprilia engines. OEM part number for comparison 890225
Almost gone
€139.90
*
Benzinhahn, universal, M16 x 1,5
Largely universal, vacuum-controlled petrol tap with screw connection. The scope of delivery also includes the pre-filter (tube), which sits in the petrol tap. Suitable for all petrol tanks with corresponding thread & vacuum connection....
Available
€10.99
*
Oil hose, universal
In the course of time the original hose can become porous, so that oil leaks out. This will not only make your engine dirty, but it will also lose lubrication, which can lead to the dreaded piston jam. 1m - universally applicable. 3 x 5mm
Available
€2.99
*
Petrol tap, universal
Manual fuel tap. Especially useful for converted carburettors or intake manifolds which are not equipped with a vacuum connection. Usually the vacuum taps are then drilled through. In order to prevent the unintentional leakage of petrol...
Available
€8.49
*
Spring clip for fuel line
Spring clip for a tight fit of the fuel hose on the fuel tap and carburetor connection. 8,8 - 9,5mm
Available
€2.99
*
Viewed