No results were found for the filter!
NG is one of the few manufacturers to provide all brake discs with a KBA approval, which is why they can be driven on public roads without any problems. The general type approval of the German Federal Motor Transport Authority (KBA) is...
Almost gone
€72.95
*
All brake discs from TRW have an ABE. The discs are low-wear and have up to 30% longer service life compared to comparable discs. TRW brake discs consist of extremely dimensionally stable and hardened steel. The precise surface grinding...
Available
€151.90
*
All brake discs from TRW have an ABE. The discs are low-wear and have up to 30% longer life compared to some comparable brake discs. The discs are made of extremely dimensionally stable and hardened steel. The precise surface grinding...
Almost gone
€103.90
*
;
€77.95
*
The aim of the development is to improve the braking behaviour compared to the original brake disc. EBC uses HPSR steel with a low carbon content, which has an 18% higher friction coefficient. This steel is much more resistant to rust...
Almost gone
€67.95
*
All brake discs from TRW have an ABE, are low-wear and have up to 30% longer life compared to some comparable spare parts. All discs are made of extremely dimensionally stable and hardened steel. The precise surface grinding (thickness...
Almost gone
€109.90
*
All brake discs from TRW have an ABE. The brake discs are inherently low-wear and have up to 30% longer life compared to some comparable spare parts. All discs are made of extremely dimensionally stable and hardened steel. The precise...
Available
€129.90
*
The goal of EBC's in the development of this brake disc is to improve the braking performance compared to the original brake disc. EBC uses heat treated carbon steel for the "Contour" brake discs. This steel is much more resistant to...
Almost gone
€43.95
*
All brake discs have an ABE. The discs are low-wear and have up to 30% longer life compared to some comparable spare parts. All discs are made of extremely dimensionally stable and hardened steel. The precise surface grinding (thickness...
Available
€125.00
*
All brake discs from TRW have an ABE. The discs are low-wear and have up to 30% longer life compared to some comparable brake discs. The discs are made of extremely dimensionally stable and hardened steel. The precise surface grinding...
Available
€139.90
*
The brake disc is a wear part, as is the brake pad itself. Over time it wears out and becomes thinner and thinner. A too thin brake disc does not take up the temperature properly, which develops when braking. The consequence can be a...
Almost gone
€92.95
*
Technical data Outside diameter: 230 mm Inner diameter: 104 mm bolt circle: 124 mm Number of mounting holes: 6 Mounting hole: 10 mm Sink: flat thickness: 4 mm Notes Due to the large number of differently used rims, it is not always...
Out of Stock
€66.95
*
The aim of the development is to improve the braking behaviour compared to the original brake disc. EBC uses HPSR steel with a low carbon content, which has an 18% higher friction coefficient. This steel is much more resistant to rust...
Available
€61.95
*
EBC Prolite-Race brake disc. The aim of the development is to improve the braking behaviour compared to the original brake disc. EBC uses HPSR steel with a low carbon content, which has an 18% higher friction coefficient. This steel is...
Available
€179.90
*
Wave brake discs from Galfer increase safety and also convince visually. The danger of brake fading is reduced due to an increased heat emission caused by the shape of the disc. In combination with rather expensive sintered metal brake...
Almost gone
€99.95
*
A wave brake disc looks good and increases your safety. Its special shape causes a higher heat emission and reduces the danger of brake fading. Expensive brake pads with sintered metal, which are however only suitable for really high...
Available
€87.95
*
Wave brake discs from Galfer increase safety and also convince visually. The danger of brake fading is reduced due to an increased heat emission caused by the shape of the disc. In combination with rather expensive sintered metal brake...
Available
€119.90
*
Wave brake disks offer besides a great look also some advantages in terms of safety! The brake disc can emit more heat due to its special shape and thus automatically reduces brake fading. A Galfer Wave brake disc achieves the best...
Almost gone
€117.95
*
The wave brake discs Galfer with 6-hole mounting optimize the brake response by a loose bearing and weaken the brake fade by shape-related heat emission. In combination with the usually more expensive sintered metal brake pads, the wave...
Almost gone
€179.90
*
High-quality replacement brake disc from the parts manufacturer Motoflow. The brake disc corresponds in performance and wear resistance of the original disc. Please use the specified dimensions for comparison, because due to the variety...
Available
€69.95
*
Technical data Outer diameter: 218 mm Inner diameter: 57 mm bolt circle: 80 mm Number of mounting holes: 6 mounting hole: 6,7 mm Countersink: none thickness: 3,5 mm Notes Due to the multitude of differently used rims, a doubtless...
Available
€27.95
*
Typical brake disks, or sprocket bolt with blue dry thread lock (medium strength). Can also be used anywhere else on the moped. Thread: M6 Head: Flat / Torx Length: 20 mm
Available
€1.99
*
Technical data Outside diameter: 220 mm Inner diameter: 110 mm bolt circle: 124 mm Number of mounting holes: 6 Mounting hole: 6.5 mm Countersink: 90° thickness: 4 mm Notes Due to the large number of differently used rims, it is not...
Almost gone
€61.95
*
Rieju original brake disc. "Wavedisc" with a diameter of 200mm. OEM part number for comparison 0/001.090.0266
Almost gone
€139.90
*
This item is an original spare part (OEM) of the brand KTM. OEM part number for comparison purposes 93042020000 Scope of delivery: 1 pc. front
Almost gone
€29.95
*
Bist du auf der Suche nach hochwertigen BREMSSCHEIBEN für deine 125er? Dann bist du bei uns genau richtig! Wir bieten eine große Auswahl an BREMSSCHEIBEN, die perfekt als Ersatzteil oder Upgrades geeignet sind.
Unsere BREMSSCHEIBEN sind aus hochwertigen Materialien gefertigt und garantieren eine verbesserte Bremsleistung für dein Bike. Sie sind auch in verschiedenen Größen und Designs erhältlich, um dein Motorrad optisch aufzuwerten.
Wir bieten auch BREMSSCHEIBEN mit ABS-Funktion an, die eine verbesserte Kontrolle und Sicherheit beim Bremsen bieten. Diese Scheiben sind besonders nützlich bei Nässe oder unebenem Gelände.
Schau dir jetzt unser Angebot an BREMSSCHEIBEN für 125er Motorräder an und verbessere die Leistung und Optik deines Bikes. Wir sind sicher, dass du etwas finden wirst, das perfekt zu Ihrem Fahrzeug passt.
Viewed