Tip Use our  Bike-Filter to get only suitable articles displayed.
Tip Nutze dein zuletzt gewähltes Bike, um nur passende Artikel angezeigt zu bekommen.
0 Article
 

Suction & injection system

Close filters
6 From 7
No results were found for the filter!
Fuel tap Yamaha OEM
Fuel tap Yamaha OEM, Yamaha DT 125 from year 04-06, original spare part
Fuel tap Original spare part OEM part number for comparison purposes 18G245000200

Out of Stock

€99.95 * ; €79.95 *
Fuel pump incl. insert
Fuel pump incl. insert, Aprilia RS4 125 from year 11-17, original spare part
Fuel pump Original spare part OEM part number for comparison purposes: 640517

Out of Stock

€269.90 *
Fuel tap Aprilia OEM
Fuel tap Aprilia OEM, Aprilia RS 125 until 2013
Fuel tap Original spare part OEM part number for comparison purposes AP8102819

Available

€29.99 *
Exhaust slider Exhaust slider, Rotax 122/123 (Aprilia RS/RX/SX 125, 2-stroke), adjustable
The exhaust slide valve of throttled Rotax 122 & 123 engines is opened abruptly at 8,000 rpm by the electrical control of the slide valve. Not everyone can cope with this sudden power delivery and not everyone wants to be driving at such...

Available

€169.90 * ; €129.90 *
Fuel pump
Fuel pump, Yamaha YZF-R/ MT 125, from year of manufacture, 2014 (RE11, RE29)
In modern 4-stroke engines, an engine that no longer starts is often due to a defective fuel pump. Due to the small design, the electronics of these pumps are unfortunately very susceptible to malfunctions. We offer you a replacement...

Almost gone

€109.90 *
Exhaust slider Italkit Racing
Exhaust slider Italkit Racing, Rotax 122/123
Pneumatic exhaust system for the Aprilia RS 125 engine. Most people will have noticed on their 125cc Aprilia RS that when the engine is de-throttled the power is suddenly released at around 8000 rpm by opening the exhaust slide. As this...

Available

€155.90 *
Polini wiring harness
Polini wiring harness, Yamaha YZF-R 125 all models/ MT 125/ WR 125
This wiring harness is needed to connect the Polini ECU device to Yamaha injectors.

Out of Stock

€24.95 *
Injection system Malossi Force Master II
Injection system Malossi Force Master II, Yamaha YZF-R 125, WR 125 until 2013
The Malossi Force Master II system primarily manipulates the injection times, which are passed on from the original control unit to the injection nozzle. This system is included in the 180cc cylinder kit. With three different...

Out of Stock

€285.00 *
Chiptuning Athena GET
Chiptuning Athena GET, KTM Duke 125 year 2011-2016
With the Athena GET Chiptuning, the original performance of the KTM Duke can be increased by a few extra horsepower, depending on which setup is used. The GET unit is simply exchanged for the original CDI control unit. Afterwards the...

Almost gone

€329.95 *
Inlet manifold / reed block kit Italkit
Inlet manifold / reed block kit Italkit, V-Force, Rotax 122/123, 32mm - 34mm carburetor
The V-Force reed valve block from Italkit has a maximum cross-section on the smallest valves. This allows the diaphragms to open and close with less inherent gas force, resulting in higher efficiency and improved motor performance....

Available

€109.90 *
Fuel tap
Fuel tap, Rieju Marathon (MRT) 125
Replacement petrol tap for Rieju motorcycles (MRT). Technical data Diameter: 15mm Cock positions : Left side : To Top : Open Right : Reserve Incl. fuel filter. OEM number for comparison : 0/000.370.0500

Available

€12.99 *
Fuel tap Original Replica
Fuel tap Original Replica, Vacuum, universal
Here we offer a vacuum fuel tap for all motorcycle models with carburetor. The fuel tap is simply pushed into the tank instead of the old one and can also be used to convert from manual operation to automatic operation. We recommend to...

Available

€8.99 *
Manual choke cable
Manual choke cable, universal, anodized handle
Here we offer a simple choke, with an actuator, which can be installed in the fairing of the vehicle as desired. The lever is delivered with a cable pull, can only be used in vehicles with carburetor.

Available

€12.99 *
Clamp
Clamp, universal, for example f. petrol, water or oil hoses, 6mm
6mm clamp for fuel hoses. Delivered is 1 piece.

Available

€1.99 *
Fuel Hose
Fuel Hose, 1 meter, d=5mm, different colours
Fuel hose with one meter length and 5mm inner diameter. In many different colours. In addition to its actual use as a petrol hose, it can also be used as a hose for many other purposes. Available in many different colours. The hose can...

Available

€2.00 *
NEW
Kraftstoffpumpendüse Cardinals Racing Kraftstoffpumpendüse Cardinals Racing, Yamaha Y15, versch. Ausführungen
Die Cardinals Racing Kraftstoffpumpendüse wurde entwickelt, um den Kraftstoffdruck im Einspritzsystem zu optimieren und eine gleichmäßige Kraftstoffversorgung des Motors zu gewährleisten. Ein stabiler und optimaler Kraftstoffdruck ist...

Available

€13.99 *
NEW
Öleinfüllschraube UMA
Öleinfüllschraube UMA, Universell Yamaha / Honda 125 ccm, mit Bypass Ventil, 90º, versch. Farben
Die Uma Racing Öleinfüllschraube 90° für Honda und Yamaha Modelle kombiniert funktionale Druckentlastung mit hochwertiger CNC-Verarbeitung. Durch die integrierte Bypass-Funktion wird überschüssiger Druck im Motorgehäuse kontrolliert...

Available

€39.95 *
Manual choke cable Motoforce Manual choke cable Motoforce, PWK / CP / Flat Slide carburetor, red
The manual choke for PWK and Polini CP carburetors gives you full control over the cold start of your scooter or moped. Instead of relying on an automatic choke, you can now adjust the fuel/air mixture manually. This ensures reliable...

Out of Stock

€6.90 *
Fuel hose / petrol hose Fuel hose / petrol hose, 1m, neoprene, rubber compound, various diameters
Fuel hose / Petrol hose In the following variants: 6mm 7mm 8mm Length : 1m

Available

From €14.99 *
Fuel filter Fuel filter, 7mm, various colors
The aluminum elements of this fuel filter are available in different colors. This allows the filter and hoses to be visually matched. The connection width of the filter is 7 mm. The fuel hoses we offer are therefore a perfect fit.

Available

€9.99 *
Float chamber drain plug Float chamber drain plug, PWK Carburetor, Orange
Simple styling part for flat slide and type PWK carburetor. The screw is made of anodized aluminum. Delivery Incl. gasket

Almost gone

€6.00 *
Oil hose Oil hose, 2,2x4mm, 5m long, green, universal
Here we offer you a transparent green oil hose. Dimensions: Inner diameter: 2,2mm Outer diameter: 4mm Length: 5m

Available

€4.99 *
Oil hose Oil hose, 2,5x5mm, 5m long, green, universal
Here we offer you a transparent green oil hose. Dimensions: Inner diameter: 2,5mm Outer diameter: 5mm Length: 5m

Available

€3.99 *
choke lever choke lever, Universal, various colors, for mounting on handlebars
Universal choke lever for custom conversions. Simple mounting with clamp, directly on the handlebars as mentioned, fits virtually any cable choke. Available in black & chrome.

Available

€10.99 *
6 From 7

Du bist auf der Suche nach hochwertigen Ersatzteilen oder Tuningkomponenten für dein 125er Motorrad? Dann bist du bei uns genau richtig! Als Experten für ansaug- und Einspritzsysteme bieten wir alles, was du für eine Reparatur oder Optimierung deines Bikes brauchst.

Ob du nun auf der Suche nach einem neuen Luftfilter, Vergaser oder sogar einem kompletten Einspritzsystem bist – bei uns wirst du garantiert fündig. Und das Beste daran: Unsere Produkte sind nicht nur von bester Qualität, sondern auch noch zu erschwinglichen Preisen.

Egal, ob du ein erfahrener Tuner bist oder gerade erst damit beginnst, dein Bike aufzumotzen: Mit unserem breiten Angebot an ansaug- und Einspritzsystemen bist du für jede Situation gerüstet. Auch wenn du dein Bike einfach nur mit hochwertigen Ersatzteilen auf Vordermann bringen möchtest, sind wir die richtige Adresse für dich. Also worauf wartest du noch? Schau jetzt bei uns vorbei und sichere dir alles, was du für dein 125er Motorrad brauchst! Wir freuen uns auf dich!

Viewed