Tip Use our  Bike-Filter to get only suitable articles displayed.
0 Article
 

Piaggio VESPA GTS 125 Exhaust Spare Parts

1. Choose model
VESPA GTS 125 i.e. (2021 bis 2023, MD3A)
Close filters
1 From 2
No results were found for the filter!

Available

€19.99 *
Mounting plate exhaust rear silencer Radical Racing GP Pro
Mounting plate exhaust rear silencer Radical Racing GP Pro, f. Radical Racing GP Pro Auspuffanlagen
Replacement mounting plate with 2 screws. Used for mounting GP-Pro exhaust systems on Yamaha YZF-R 125 and MT 125 from Bj. 2021. But can also be used as a bracket for tinkering with all sorts of other uses. Technical data Dimensions:...

Available

€2.49 *

Available

€9.99 *
Exhaust spring
Exhaust spring, universal, 44mm
Simple exhaust spring, to hang the exhaust system on the cylinder, or to connect the muffler & manifold. Can also be used for other tinkering. The spring has ring eyelets at both ends. A little trickier to fit, but the hold is better!...

Available

€2.59 *
Insulating wool
Insulating wool, 25x25cm
Exhaust systems become louder with increasing age. One reason for this is that impurities from the engine, such as combustion residues, are deposited in them. In the same way it can also happen that insulation wool comes off the exhaust...

Available

€5.99 *
Exhaust plug Radical Racing
Exhaust plug Radical Racing, Universal, including FREE keychain !
Exhaust plugs are used during transport and mothballing of motorcycles to prevent rainwater from entering the exhaust system. This exhaust plug from Radical comes with a Remove before Ride Keylace.

Almost gone

€6.99 *
NEW
dB-killer insert GPR
dB-killer insert GPR, E4 rage
This is a replacement part for lost or defective dB killers. According to the manufacturer, it is compatible with all GPR Furore rear silencers . Scope of delivery dB-killer Seeger ring

Available

€79.95 *
Puig exhaust guard
Puig exhaust guard, 170-600mm, various Colors
Are you looking for practical and stylish protection for your bike's exhaust? The Puig exhaust guard offers you exactly that: reliable protection in the event of falls and a sporty look that enhances your bike. Advantages for you:...

Available

€59.95 *
dB-Killer Einsatz GPR
dB-Killer Einsatz GPR, Deeptone / Powercan Schalldämpfer
Mit diesem dB-Eater von GPR kannst du deinen Auspuff auf eine leisere, ABE-konforme Lautstärke bringen – ideal für den Straßenverkehr. Der Einsatz passt in GPR Powercan- und Deeptone-Quad-Schalldämpfer und reduziert den Geräuschpegel...

Almost gone

€89.90 *
Auspufffedern GPR
Auspufffedern GPR, universell
Diese großen Auspufffedern von GPR sorgen für sicheren Halt zwischen Schalldämpfer und Krümmer – ideal für Auspuffanlagen mit größerem Abstand oder flexibler Montage. Gefertigt aus robustem Federstahl, sind sie langlebig und...

Available

€16.95 *
Rubber exhaust springs GPR
Rubber exhaust springs GPR, universal, for exhaust clamps
This rubber shim from GPR serves as a protective insert for exhaust clamps and prevents scratches or vibrations between the clamp and the silencer. It has a standard length and fits all GPR exhaust clamps - simply cut to size and insert....

Available

€16.95 *
Auspuffgitter GPR
Auspuffgitter GPR, M3 Auspuffanlagen
Ersatzgitter für M3 Auspuffanlagen

Available

€49.95 *
Rubber cap LeoVince
Rubber cap LeoVince, f. LeoVince exhaust systems w. Carbon end cap
Cover cap for the mounting screw of the dB-Killer of SBK and LV-One exhaust systems.

Available

€9.99 *
Rubber bearing exhaust mounting Watts Rubber bearing exhaust mounting Watts, Universal, various colours
Colored rubber bearing for mounting the exhaust. It counteracts the expansion and contraction of the metal caused by heat development and thus prevents cracks in the frame or exhaust itself.

Out of Stock

€9.99 *
Exhaust gasket ring /- Graphite gasket Arrow
Exhaust gasket ring /- Graphite gasket Arrow, Universally usable for Arrow exhausts
Arrow replacement seal. Can be used not only with Arrow, but also with all other exhaust systems with 32mm diameter and plug-in flange. Technical data Diameter (inside): 32mm width: 30mm

Available

€10.00 *
Pipe clamp / Exhaust clamp Arrow
Pipe clamp / Exhaust clamp Arrow, Universal for Arrow exhausts, D=40mm
Spare part for Arrow exhaust systems. Can also be used for exhaust systems of other manufacturers with the same diameter.

Available

€10.00 *
Exhaust clamp steel Exhaust clamp steel, 36-39mm
20mm wide steel exhaust clamp with a clamping width of 36-39mm.

Available

€7.49 *
Manifold gasket
Manifold gasket, Universal, D=40mm
Copper seal ring. Technical data Inner diameter: 31.50 mm Outside diameter: 40.00 mm thickness: 4 .00 mm

Almost gone

€5.95 *
Manifold gasket
Manifold gasket, universal, graphite, 32x42x3mm
Replacement graphite manifold gasket. Fits in principle all vehicles with straight flange or plug-in flange connections up to 42mm diameter. (42mm is for example the original size of the Yamaha YI-3 & YI-4 engine).

Available

€4.99 *
Manifold gasket Athena
Manifold gasket Athena, 38 x 45 x 5,3mm
Aluminium/steel manifold gasket from Athena. Can be used on all vehicles with the corresponding outlet dimension of 45mm diameter.

Available

€4.50 *
Stud bolt universal, e.g. exhaust manifold Stud bolt universal, e.g. exhaust manifold, M6x30
Thread dimension M6x30. Scope of delivery: 1 pc.

Available

€1.59 *
Outlet screw set Outlet screw set, Cross/ 10 hexagon socket, M6 x 16mm (pair)
Exhaust bolt set for almost all common motorcycles. Can be mounted with a 10 mm wrench and a Phillips screwdriver. Dimensions: M6 x 16mm. Delivered are 2 pieces.

Available

€3.59 *
Exhaust connection gasket Athena
Exhaust connection gasket Athena, universal, 35x42.5x30mm
Graphite sealing ring from Athena. Can be used in many different vehicles as a seal for overlapping plug connections.

Available

€13.95 *
Manifold gasket Manifold gasket, 30x23x4mm
Standard aluminium sealing ring for various exhaust systems.

Available

€1.99 *
1 From 2
Viewed