1. Choose model
DT 125 (1999 bis 2006)
2. Filter by category
No results were found for the filter!
Brake fluid reservoir, universell, rot
Herewith we offer you a cheap brake fluid reservoir with stylish red CNC parts. The lid comes directly incl. seal, clamps and hose (10cm). Lid, mounting and screw cover are anodized red. In addition, the tank has the typical level...
Available
€10.99
*
Outer casing throttle cable, universal, different colours
This inexpensive cover offers itself , in order to adapt the throttle cable in colour to your bike. Dimensions Length: 2,5m Diameter 5mm
Available
€3.99
*
Spring clutch lever Domino, universal
The return spring on the clutch lever guarantees that it always springs back to its original position. If the spring is worn out, it must be replaced as quickly as possible. We offer an inexpensive alternative for this. In plug & play...
Available
€2.49
*
EBC standard brake pads contain aramid fibres, which are 6 times stronger than steel and completely asbestos-free. Only low-emission components are used in the production of EBC. These standard materials exceed all previous EBC standard...
Out of Stock
€27.90
*
Screw / Sprocket bolt, M6x20 (DIN933), universal, 6 stck.
In the end it is a normal M6 8.8 DIN screw. Therefore it can be used almost universally. Here we offer a set of 6 screws. Scope of delivery: 6 pcs.
Available
€10.99
*
Pack of 5 screws, M6 x 20 mm, flat head / inside corner (Torx), stepped
Typical brake disks, or sprocket bolt with blue dry thread lock (medium strength). Can also be used anywhere else on the moped. Thread: M6 Head: Flat / Torx Length: 20 mm
Available
€9.99
*
Screw, M6, with collar, pack of 4
Collar screw with M6 thread and 16mm length is idr. used as brake disk screw. But it can also be used for everything else. Thread: M6 Head: 6 Kant length: 16 mm
Available
€5.49
*
Screw, sprocket / brake disk, M8 x 18 mm, flat head / hexagon socket (TX), stepped
These bolts are usually used as brake disk or sprocket bolts. Incl. dry threadlocker (blue - medium strength). Thread: M8 Head: Flat / TX Length: 18 mm
Available
€2.49
*
JMP Levers Drop Forged Drop Forged levers from JMP are made from the high quality 6061-T6 aluminum alloy. The high material density makes the levers more elastic and thus more break-resistant than conventional replacement levers produced...
Almost gone
€19.99
*
Clutch cable adjusting screw Domino, M7, Universal
Almost universally applicable adjusting screw for clutch cables. Thread: M7 Inner diameter: 8,5 mm
Available
€5.49
*
EBC Standard brake pads with aramid fibres, which are 6 times stronger than steel and completely asbestos-free. Only low-emission components are used in production, these standard materials exceed all previous EBC standard qualities. The...
Available
€29.90
*
The aim of the development is to improve the braking behaviour compared to the original brake disc. EBC uses HPSR steel with a low carbon content, which has an 18% higher friction coefficient. This steel is much more resistant to rust...
Out of Stock
€67.95
*
Speedometer cable, Yamaha DT 125 until 2006
The smoothness of this European-derived shaft is improved by special calcium-based oils or greases. The lifetime of these waves is comparable, until longer than the original wave.
Out of Stock
€9.95
*
These EBC brake pads are provided with aramid fibres, which are 6 times stronger than steel, and of course they are completely asbestos-free. In the production of EBC generally only low-emission components are used. These materials also...
Almost gone
€29.90
*
throttle cable adjusting screw, M6, Universal
Almost universally applicable adjusting screw for throttle cables. Thread: M6 Inner diameter: 6 mm
Available
€2.99
*
Since the original screw can no longer be used with AJP brake calipers, we offer you here a suitable screw to order. Please take the thread dimension from the article description of the caliper.
Available
€3.59
*
Since the original screw can no longer be used with AJP brake calipers, we offer you here a suitable screw to order. Please take the thread dimension from the article description of the brake caliper.
Out of Stock
€3.99
*
Brake fluid reservoir, Universal, CNC milled
CNC milled brake fluid reservoir incl. handlebar mount. Available in different colours.
Out of Stock
€18.90
*
Copper paste is used for the highest temperatures in screw connections and interfaces, e.g. exhaust screws, spark plug threads and brakes, to prevent corrosion and ensure subsequent disassembly. Operating temperature range: - 40 °C to +...
Available
€8.99
*
Cable clip for the safe laying of brake hoses, cables, speedo cables or various trains. The mounting hole has a diameter of 6mm, so it can be mounted under nearly every screw up to 6mm.
Available
€5.49
*
Original Yamaha key blank. Can be used for every Yamaha bike train, of course with the exact cut. OEM part number for comparison purposes 5D7H25110900 ; 5D7H25110000
Out of Stock
€23.95
*
The aim of the development is to improve the braking behaviour compared to the original brake disc. EBC uses HPSR steel with a low carbon content, which has an 18% higher friction coefficient. This steel is much more resistant to rust...
Available
€61.95
*
Anti- Squeak foil, f. Brake pads
Anti-squeak foil / noise damping foil for brake pads. The foil is glued to the back plate of the brake pads and thus ensures less vibration, protects the brake pistons and reduces squeaking noises during braking. Scope of delivery: 4...
Available
€9.99
*
Standard brake pads from Galfer offer absolutely sufficient performance in all areas of application. The brake pad develops the best braking effect in medium to low temperature ranges, which makes it perfect for city and interurban...
Available
€25.95
*
;
€17.99
*
With the right parts on your brakes, chassis, frame and suspension from your Yamaha DT 125, you provide for the optimal driving experience and maximum safety.
"Who brakes later drives faster", you know. But then you should also have good brakes! Don't save at the wrong end and make sure that you regularly check the brake pads and discs on your DT 125. Brake discs on your DT 125 checks.
With the right levers and cables, you ensure a pleasant response when braking and clutching. clutch. This should not be underestimated, once you have sat in the saddle for half a day and pulled a few Hundred times on the lever has pulled, it can already be exhausting.
.
With the right fork and the optimal Stoßdämpfern on your Yamaha DT 125, you provide für your perfect comfort. Or not, if you want to have more of a sporty seat and driving feel.
Viewed