1. Choose model
MT 125 (ab 2024, Euro5+)
MT 125 (2021 bis 2023, RE40 - Euro5)
MT 125 (2020 bis 2020, RE39 - Euro4)
MT 125 (2017 bis 2019, RE29 - Euro4)
MT-125 (2014 bis 2016, RE11 - Euro3)
No results were found for the filter!
CNC machined and color anodized cover for the oil filter of Yamaha/Minarelli YI engines. Fits different vehicles. Through the attached Radical "R" icon an additional small eye-catcher on your MT 125, Beta RR or Fantic.
Available
€49.95
*
Herewith you get a color matching your bike brake fluid reservoir with CNC cap. The attachment takes place directly on the tank. The cap comes incl. seal, clamps and hose. In addition, the tank (∅42mm) has the typical level indicators...
Available
€9.99
*
With the lever protectors of Motoflow you effectively protect your levers and or hand from bending such as in a fall. The protectors are available in 2 different colors.
Available
€39.95
*
With the Motoflow handlebar clamps you give your handlebar an extra look through the red CNC machined aluminum. Your handlebar is raised a few centimeters, which can improve posture and thus prevent back pain. Due to the inner diameter...
Available
€29.95
*
Tire valve caps from Radical Racing with a sporty and modern design.
Available
€5.49
*
Motocross footpegs with widened contact area and improved grip. Made of CNC machined and anodized aluminum. The footrests are delivered together with the already known footrest adapters. The rests are then bolted directly to the system...
Available
€39.95
*
Color matching, CNC milled 28.5mm handlebar mounts for the perfect finish on your bike! The mount is completely CNC machined and anodized afterwards. Available in different colors. Scope of delivery: 2pcs.
Available
From €29.90
*
Simple handlebar grip rubbers with optional red or black anodized sleeves on the front and rear part of the handle. The rubbers are medium soft and thus universally applicable. The assembly is quite Simpel. The indicated handlebar ends...
Available
€20.95
*
Brake cylinder cover Radical Racing, universal, versch. Colors, rear
Matching the various other engine styling parts from Radical Racing, herewith also comes a fully enclosing rear brake cylinder guard. incl. mounting material
Available
From €17.99
*
Aluminum fairing screws from Motoflow, in colored anodized finish. The screws are provided with wide lens head and a hexagon socket. So the fairing holds securely in place. Since it is aluminum, these screws are not suitable for high...
Available
€3.99
*
Brake & clutch lever guards are used on racing motorcycles similar to handguards on motocross bikes. However, they are intended less to protect the hands from mud and debris and more to protect the levers from a fall. That way, if the...
Available
€29.99
*
If you are looking for a lever set with ABE or KBA approval, you will find it here. The majority of the levers offered on the market for Yamaha YZF-R & MT 125 are offered without ABE. At the TÜV, or also not infrequently occurring police...
Available
From €99.90
*
We offer a complete set consisting of adjustable brake lever and clutch lever armature. Also included is a master cylinder for hydraulic brakes. The individual parts of the set are mostly CNC milled and have an extremely attractive...
Available
€99.90
*
;
€69.90
*
Vibration dampers are actually used to reduce vibrations in the steering tube, since these vibrations are only very slightly pronounced in the 125 class motorcycles anyway, it is not necessary to perform vibration dampers as absorber...
Available
€14.99
*
;
From €9.99
*
Fits 28.5mm handlebars. The handlebar is quite flat on this version. Of course, there is also the matching intake or the matching adapter for the standard 22mm handlebar mounts. The intake is completely CNC machined and anodized...
Available
€29.95
*
Vibration dampers are actually used to reduce vibrations in the steering tube, since these vibrations occur only very slightly on most 125s anyway, it is not necessary to design vibration dampers as absorber weights. Here we can offer...
Available
€17.99
*
;
€12.99
*
CNC machined brake fluid reservoir from Motoflow. Available in different colors.
Available
€19.95
*
If you are looking for a lever set with ABE or KBA approval, you will find it here. The majority of the levers offered on the market for Yamaha YZF-R & MT 125 are offered without ABE. At the TÜV, or also not infrequently occurring police...
Available
€99.95
*
From Radical Racing we can offer different color anodized aluminum footrests. The footrests are simply exchanged against the originals. The assembly can be done within about 10 minutes and is quite simple. The footrests are delivered...
Available
€39.95
*
Footrest adapter from Radical Racing. Suitable for Yamaha YZF-R 125 & MT 125. Note Here are only the adapters, as spare part! There are no footrests included!
Available
€22.95
*
Spare footrest pair from Radical. Can be mounted on Radical Racing footrest adapters. Note Delivery WITHOUT footrest adapter!
Available
€22.95
*
Stand mounts are used to use motorcycle paddock stands with claw mounts. The stand holders are 2-part black and orange anodized.
Available
€12.90
*
Simple CNC milled styling part for KTM Duke or RC 125, the screw is located at the top of the clutch housing. Great optical effect for a small budget!
Available
€13.99
*
For Yamaha 125cc YI-3-, as well as Kawasaki 125cc- and Honda KPP 125cc 4-stroke engines, we also offer an attractively designed oil filler plug. The screw is CNC milled and completely made of one piece of aluminium. It is available in...
Available
€15.90
*
;
€9.90
*
With CNC parts you have the opportunity to create with minimal effort an individual look to your Yamaha MT 125 to create. Parts like, Öleinfüllschrauben, brake cylinder cover, chain protector or even sprocket cover & motorcycle covers from CNC are mounted or replaced in a few minutes. Even more the parts, compared with a tuning exhaust system or a größeren cubic kit, significantly cheaper.
Apart from the erwähnten points CNC optics parts offer a much higher quality appearance than the Standard parts of the MT 125. We ourselves offer our own parts from Radical Racing only after strict quality control. quality control. So in addition to fit and visual impact, we also check function! For example the brake cylinder covers have a hole to prevent a vacuum in the reservoir, just like the original cover. can arise.
In addition, there are also a variety of different colors, so you also the right CNC parts matching the color of your motorcycle have.
Viewed