1. Choose model
MT 125 (ab 2025, Euro5+)
MT 125 (2021 bis 2024, RE40 - Euro5)
MT 125 (2020 bis 2020, RE39 - Euro4)
MT 125 (2017 bis 2019, RE29 - Euro4)
MT-125 (2014 bis 2016, RE11 - Euro3)
No results were found for the filter!
Scope of delivery: 1 piece. OEM part number for comparison purposes Yamaha: 3C1E35560000
Available
€5.99
*
The UMA intake manifold with 32 mm is an essential attachment part for your Yamaha Yzfr or Mt 125. It is important not to skimp on essential parts for the quality of the gasoline-air mixture and thus an optimal power development. The UMA...
Almost gone
€54.95
*
The UMA air filter connection is an essential component for your Yamaha YZFR 125. It is responsible for ensuring an optimal gasoline-air mixture. So, in order to burn the gasoline efficiently, it is important that everything is tight and...
Out of Stock
€32.95
*
The UMA intake manifold for the YI engines is an essential part for the cylinder. It injects the fuel&air and ensures an optimal gasoline-air mixture. It is virtually the A and O for the optimal power development. That's why you...
Available
€54.95
*
34mm intake manifold from UMA-Racing, imported for you from faraway Malaysia. The intake manifold with 34mm is especially in conjunction with the 34mm throttle body from UMA-Racing an outstanding investment in your 125 Yamaha. The intake...
Available
€54.95
*
Handlebar switch Race Dynamics Powertronic, Universal for Power Tronic V4, Black
With the optional handlebar switch from Race Dynamics for the Powertronic V4 you can easily switch between the two power modes. This handlebar switch is suitable for any vehicle for which a Powertronic V4 tuning ECU is available, such as...
Available
€62.95
*
Out of Stock
€217.00
*
ECU Chiptuning Modul Racedynamics FuelX Lite, Yamaha MT 125 ab Bj. 20 (RE40)
Das einfachste und günstigste Tuningmodul von Racedynamics, welches simpel erklärt, das Signal der Original Lambdasonde umrechnet und ein verfälschtes Signal an das Original Motorsteuergerät übergibt. Durch diesen Eingriff wird die...
Out of Stock
€214.90
*
ECU Chiptuning Modul FuelX Pro, Yamaha MT 125 from year 20
This tuning module from Racedynamics is a simple to use auxiliary control unit, which simply explains, the signal of the original lambda probe converted and a distorted signal to the original engine control unit. Through this...
Out of Stock
€249.90
*
In addition to the improved fuel curves, the efforts of Malossi technical staff led to an increase in the rev limiter depending on the vehicle, making Force Master 2 an even more powerful ECU! Force Master 2 allows you to change the...
Out of Stock
€329.90
*
ECU Chiptuning Power Tronic V4, Yamaha MT 125 from year 20
The "PowerTRONIC V4 " is one of the most advanced "piggyback control units" with full range of functions for motorcycles currently available worldwide. "Piggyback" in this case means that this control module is used in addition to the...
Out of Stock
€399.00
*
Out of Stock
€101.65
*
Oil hose, 2,2x4mm, 5m long, green, universal
Here we offer you a transparent green oil hose. Dimensions: Inner diameter: 2,2mm Outer diameter: 4mm Length: 5m
Available
€3.49
*
Oil hose, 2,5x5mm, 5m long, green, universal
Here we offer you a transparent green oil hose. Dimensions: Inner diameter: 2,5mm Outer diameter: 5mm Length: 5m
Available
€3.99
*
Benzinhahn, universal, M16 x 1,5
Largely universal, vacuum-controlled petrol tap with screw connection. The scope of delivery also includes the pre-filter (tube), which sits in the petrol tap. Suitable for all petrol tanks with corresponding thread & vacuum connection....
Almost gone
€10.99
*
This wiring harness is needed to connect the Polini ECU device to Yamaha injectors.
Out of Stock
€24.95
*
Oil hose, universal
In the course of time the original hose can become porous, so that oil leaks out. This will not only make your engine dirty, but it will also lose lubrication, which can lead to the dreaded piston jam. 1m - universally applicable. 3 x 5mm
Available
€2.99
*
Petrol tap, universal
Manual fuel tap. Especially useful for converted carburettors or intake manifolds which are not equipped with a vacuum connection. Usually the vacuum taps are then drilled through. In order to prevent the unintentional leakage of petrol...
Almost gone
€8.49
*
Spring clip for fuel line
Spring clip for a tight fit of the fuel hose on the fuel tap and carburetor connection. 8,8 - 9,5mm
Available
€2.99
*
Viewed