No results were found for the filter!
Benzinpumpe, Yamaha WR 125 Bj. 09-16, YZF-R 125 Bj. 08-16
Bei diesem Artikel handelt es sich um eine günstige Alternative zum teuren Originalersatzteil. Die BEnzinpumpe entspricht dem Original in Maßen, Anschluss und Funktion. Die Kraftstoffpumpe wird einfach gegen die defekte Pumpe...
Out of Stock
€21.95
*
ECU Chiptuning Modul FuelX Pro, Yamaha YZF-R 125 year 19-20 (RE39)
This tuning module from Racedynamics is a simple to use auxiliary control unit, which simply explains, the signal of the original lambda probe converted and a distorted signal to the original engine control unit. Through this...
Available
€249.90
*
ECU Chiptuning Power Tronic V4, Yamaha YZF-R125 from year 19 (RE39/RE40)
The "PowerTRONIC V4 " is one of the most advanced "piggyback control units" with full range of functions for motorcycles currently available worldwide. "Piggyback" in this case means that this control module is used in addition to the...
Available
€459.90
*
Out of Stock
€101.65
*
With this programming kit from the Italian tuning specialist Top Performances, the injection programs from the injection control unit can be changed. The supplied CD contains the programs and the instructions with which new mappings can...
Almost gone
€99.95
*
Oil hose, 2,2x4mm, 5m long, green, universal
Here we offer you a transparent green oil hose. Dimensions: Inner diameter: 2,2mm Outer diameter: 4mm Length: 5m
Available
€3.49
*
Oil hose, 2,5x5mm, 5m long, green, universal
Here we offer you a transparent green oil hose. Dimensions: Inner diameter: 2,5mm Outer diameter: 5mm Length: 5m
Available
€3.99
*
Gasoline filter, Nylon, 6mm
This fuel filter has a bright nylon filter inside. This allows you to always see what is filtered. To install, simply split your fuel hose and insert the filter in the middle. Then you can secure the filter with clamps and you are done....
Available
€1.99
*
This pressure regulator increases the fuel pressure of the injection pump from 2.5 bar to 3.5 bar. This also increases the injection quantity, since the opening times of the injection valve do not change. This makes it very easy to...
Out of Stock
€39.95
*
Single Malossi Force-Master engine control unit. Required by Malossi to use the cylinder kit: "3114852". The Malossi Force Master offers the possibility to optimize the mixture, respectively the injection of the engine in all load...
Out of Stock
€285.00
*
Benzinhahn, universal, M16 x 1,5
Largely universal, vacuum-controlled petrol tap with screw connection. The scope of delivery also includes the pre-filter (tube), which sits in the petrol tap. Suitable for all petrol tanks with corresponding thread & vacuum connection....
Available
€10.99
*
This wiring harness is needed to connect the Polini ECU device to Yamaha injectors.
Out of Stock
€24.95
*
The Malossi Force Master II system primarily manipulates the injection times, which are passed on from the original control unit to the injection nozzle. This system is included in the 180cc cylinder kit. With three different...
Out of Stock
€285.00
*
Oil hose, universal
In the course of time the original hose can become porous, so that oil leaks out. This will not only make your engine dirty, but it will also lose lubrication, which can lead to the dreaded piston jam. 1m - universally applicable. 3 x 5mm
Available
€2.99
*
Petrol tap, universal
Manual fuel tap. Especially useful for converted carburettors or intake manifolds which are not equipped with a vacuum connection. Usually the vacuum taps are then drilled through. In order to prevent the unintentional leakage of petrol...
Available
€8.49
*
Spring clip for fuel line
Spring clip for a tight fit of the fuel hose on the fuel tap and carburetor connection. 8,8 - 9,5mm
Available
€2.99
*
Viewed