No results were found for the filter!
Standard Rieju replacement fairing screw, but we have marked this as a universal screw in the shop, because it can of course be used on any other vehicle as well. OEM part number for comparison purposes 0/000.460.3031
Available
€1.49
*
Fairing / cockpit screw set, screws + washer + rubber nut M6 (10 pieces each)
6mm fairing screws, or cockpit washer screw set. The set contains 10 screws, the matching washers and 10 rubber nuts.
Almost gone
€15.99
*
Cladding screw, M6x14, Torx T-30
Spare fairing screw. It can of course be used on any other vehicle. Please note dimensions!
Available
€1.49
*
Spare fairing screw. It can of course be used on any other vehicle. Note dimensions! Scope of delivery 5 pcs.
Available
€6.99
*
Cladding screw, M6x10, Torx T-30, universal
Simple, very short fairing screw with flat head and Torx hexagon socket. Technical data length: 10mm Thread: M6 Width across flats: T-30
Available
€1.49
*
Screw / Sprocket bolt, M6x20 (DIN933), universal, 6 stck.
In the end it is a normal M6 8.8 DIN screw. Therefore it can be used almost universally. Here we offer a set of 6 screws. Scope of delivery: 6 pcs.
Available
€10.99
*
Screw, M5x16, Inbus DIN912, universal, 5 stck.
5mm DIN socket head screw. Can be used for every imaginable purpose. Scope of delivery: 5 pcs. Technical data Head: Cylindrical drive: Hexagon socket (Allen) length: 16mm Thread: M5 Standard: DIN912
Out of Stock
€5.99
*
Screw, M5x16, Inbus DIN912, universal
5mm DIN socket head screw. Can be used for every imaginable purpose. Scope of delivery: 1 pc. Technical data Head: Cylindrical Propulsion: Hexagon socket (Inbus) Length: 16mm Thread: M5 Standard: DIN912
Out of Stock
€1.29
*
Screw / Sprocket bolt, M6x20 (DIN933), universal
In the end it is a normal M6 8.8 DIN screw. Therefore it can be used almost universally. Scope of supply: 1 pc.
Available
€1.99
*
Cladding screw, M6x10, Torx T-30, universal, 5 stck.
Simple, very short fairing screw with flat head and Torx hexagon socket. Can of course be used on all vehicles. Scope of delivery: 5 pcs. Technical data length: 10mm Thread: M6 Width across flats: T-30
Available
€6.99
*
Cladding screw, Universal, M5
Screw with collar and hexagon socket, for fairing parts, suitable for various vehicles. Thread: M5 length: 9 mm
Available
€1.99
*
Pack of 5 screws, M6 x 20 mm, flat head / inside corner (Torx), stepped
Typical brake disks, or sprocket bolt with blue dry thread lock (medium strength). Can also be used anywhere else on the moped. Thread: M6 Head: Flat / Torx Length: 20 mm
Available
€9.99
*
Screw, M6, with collar, pack of 4
Collar screw with M6 thread and 16mm length is idr. used as brake disk screw. But it can also be used for everything else. Thread: M6 Head: 6 Kant length: 16 mm
Available
€5.49
*
Fairing / cockpit screw set, M5, screws, washers & rubber nut, (10 pieces each)
5mm fairing screws, or cockpit windscreen screw set. The set contains 10 screws, the matching washers and 10 rubber nuts. suitable for hole diameters 10mm to 11mm
Available
€15.99
*
Schraube, Kettenrad / Bremsscheibe, M8 x 18 mm, Flachkopf / Innensechskant (TX), abgesetzt
Diese Schrauben werden idr. als Bremsscheiben-, oder Kettenradschrauben verwendet. Inkl. trockener Schraubensicherung (blau - mittelfest). Gewinde: M8 Kopf: Flach / TX Länge: 18 mm
Available
€2.49
*
10 pack fairing screws, Universal, M5
Pack of 10 hexagon socket head fairing screws, suitable for the fairings of various vehicles. Thread: M5 length: 9 mm
Available
€16.99
*
Clutch cable adjusting screw, M6, Universal
Almost universally applicable adjusting screw for clutch cables. Thread: M6 Inner diameter: 8,5 mm
Available
€3.49
*
Clutch cable adjusting screw Domino, M7, Universal
Almost universally applicable adjusting screw for clutch cables. Thread: M7 Inner diameter: 8,5 mm
Available
€5.49
*
Chain wheel bolt, universal, M8x1,25x40mm
Stud bolt for universal use. Used on some vehicles, e.g. for fastening the chain wheel. (Yamaha MT 125 & YZF-R 125)
Available
€3.99
*
Drain plug Oil/ dummy plug Coolant temperature, M14x1.5
M14 screw with 1.5 thread pitch. Can be used e.g. as drain plug for engine oil.
Available
€2.79
*
Available
€1.59
*
Outlet screw set, Cross/ 10 hexagon socket, M6 x 16mm (pair)
Exhaust bolt set for almost all common motorcycles. Can be mounted with a 10 mm wrench and a Phillips screwdriver. Dimensions: M6 x 16mm. Delivered are 2 pieces.
Available
€3.59
*
Screw, M4, hexagon socket
Is used by some manufacturers, for example, to secure the sprocket. But it can also be used to secure other things like any other screw.
Available
€1.99
*
Available
€0.99
*
Viewed