Tip Use our  Bike-Filter to get only suitable articles displayed.
0 Article
 

Aprilia RS/RS4 125 Suction & injection system

1. Choose model
RS 125 (ab 2021, XA- Euro5)
RS 125 (2017 bis 2020, KC - Euro4)
RS4 125 (2011 bis 2017, TW - Euro3)
RS 125 (2006 bis 2013, RM/RD)
RS 125 (1995 bis 2005, MP/SF)
Close filters
2 From 2
No results were found for the filter!
Oil hose Oil hose, universal
In the course of time the original hose can become porous, so that oil leaks out. This will not only make your engine dirty, but it will also lose lubrication, which can lead to the dreaded piston jam. 1m - universally applicable. 3 x 5mm

Available

€2.99 *
Petrol tap Petrol tap, universal
Manual fuel tap. Especially useful for converted carburettors or intake manifolds which are not equipped with a vacuum connection. Usually the vacuum taps are then drilled through. In order to prevent the unintentional leakage of petrol...

Available

€8.49 *
Spring clip for fuel line Spring clip for fuel line
Spring clip for a tight fit of the fuel hose on the fuel tap and carburetor connection. 8,8 - 9,5mm

Available

€2.99 *
Inlet manifold / reed block kit Italkit
Inlet manifold / reed block kit Italkit, V-Force, Rotax 122/123, 32mm - 34mm carburetor
The V-Force reed valve block from Italkit has a maximum cross-section on the smallest valves. This allows the diaphragms to open and close with less inherent gas force, resulting in higher efficiency and improved motor performance....

Available

€109.90 *
2 From 2
Viewed