1. Choose model
RS 125 (2021 bis 2024, XA- Euro5)
RS 125 (2017 bis 2020, KC - Euro4)
RS4 125 (2011 bis 2017, TW - Euro3)
RS 125 (2006 bis 2013, RM/RD)
RS 125 (1995 bis 2005, MP/SF)
2. Filter by category
No results were found for the filter!
NEW
Spacers for handlebar clamps - So that you can also use them with a different handlebar thickness. For example, if you have 22mm handlebars but 28mm clamps , you can still use them together.
Available
€3.99
*
Available
€2.99
*
Simple exhaust spring, to hang the exhaust system on the cylinder, or to connect the muffler & manifold. Can also be used for other tinkering. The spring has ring eyelets at both ends. A little trickier to fit, but the hold is better!...
Available
€2.59
*
Typical brake disks, or sprocket bolt with blue dry thread lock (medium strength). Can also be used anywhere else on the moped. Thread: M6 Head: Flat / Torx Length: 20 mm
Available
€1.99
*
During maintenance work on the brake system, these small parts are often lost. The bleeder nipple can then become clogged and maintenance of the brake system becomes impossible the next time. A cover should therefore always be installed!
Available
€2.99
*
Almost universally applicable adjusting screw for clutch cables. Thread: M6 Inner diameter: 8,5 mm
Available
€3.49
*
Wheel bearing which can be used for different vehicles as front or rear wheel bearing. Note Please compare the technical data of this bearing with your original wheel bearing. Technical data Outside diameter: 32 mm width: 10 mm Inner...
Available
€5.99
*
Universal SKF bearing of type "6202-2RS", sealed on both sides. Suitable for example as rear or front axle bearing. But please compare your bearing type before ordering! Technical data Type : 6202 Inner diameter : 15 mm Outside diameter...
Available
€5.99
*
Magnetic oil drain plugs collect the metallic abrasion at the magnet and thus protect the engine & gearbox from excessive wear. Supplied with sealing ring.
Available
€5.99
*
Nut with M7 thread for fixing the cylinder head. A set of 4 special nuts is supplied. The nuts have a length of 13mm and have a collar. Special thread M7. Suitable for all Minarelli, Kymco, MBK, Yamaha, CPI, Keeway engines and other...
Available
€3.99
*
6mm clamp for fuel hoses. Delivered is 1 piece.
Available
€1.99
*
We can supply these spare clips for your fairing at a reasonable price. 10 pieces - For M6 screws!
Available
€8.99
*
Here we can offer you 10 sheet metal nuts incl. the suitable lens head cross recessed screws. The screws and lenses are especially suitable for fixing the fairing. The brass-coloured screws also give your moped a noble gold screw look....
Available
€5.19
*
Hose clamps can be used in almost any application. Whether as reinforcement of the rubber mountings of the exhaust, or as a normal water hose clamp.
Available
€1.29
*
NEW
This item is an original spare part from the Piaggio brand. OEM number for comparison purposes: 8290405
Out of Stock
€17.99
*
NEW
Cladding screw set, universal, various colors Colors, M6x20, 10 pieces
Scope of delivery: 10x M6x20 screw 10x color anodized washer
Almost gone
€7.99
*
NEW
Domino throttle cable nipple, universell
This is a spare part for many common throttle cables. Dimensions: 5.5mm x 7.5mm
Available
€1.99
*
This article is an original spare part (OEM) from Aprilia OEM part number for comparison purposes : AP8221204 Scope of delivery: 1
Out of Stock
€10.99
*
This article is an original spare part (OEM) from Aprilia OEM part number for comparison purposes : AP8121999 Scope of delivery: 1
Out of Stock
€13.99
*
This article is an original spare part (OEM) from Aprilia OEM part number for comparison purposes : AP8221211 Scope of delivery: 1
Out of Stock
€3.49
*
Kickstarter Gummi, universell, schwarz
Abgewinkelter Kickstartergummi – mehr Grip beim Kick! Robuster Kickstartergummi mit abgewinkeltem Design für besseren Halt beim Starten. Rutschfestes Material sorgt für sicheres Kicken – auch bei Nässe. Details: Abgewinkelte Form für...
Almost gone
€2.99
*
Diese großen Auspufffedern von GPR sorgen für sicheren Halt zwischen Schalldämpfer und Krümmer – ideal für Auspuffanlagen mit größerem Abstand oder flexibler Montage. Gefertigt aus robustem Federstahl, sind sie langlebig und...
Available
€16.95
*
This item is an original spare part (OEM) from Aprilia OEM part number for comparison purposes : AP0240820 Scope of delivery: 1
Out of Stock
€14.99
*
This article is an original spare part (OEM) from Aprilia OEM part number for comparison purposes : AP4ABN000117 Scope of delivery: 1
Available
€14.99
*
Viewed