1. Choose model
RS 125 (ab 2025, XTA (Euro5+))
RS 125 (2021 bis 2024, XA- Euro5)
RS 125 (2017 bis 2020, KC - Euro4)
RS4 125 (2011 bis 2017, TW - Euro3)
RS 125 (2006 bis 2013, RM/RD)
RS 125 (1995 bis 2005, MP/SF)
No results were found for the filter!
Spacers for handlebar clamps - So that you can also use them with a different handlebar thickness. For example, if you have 22mm handlebars but 28mm clamps , you can still use them together.
Available
€3.99
*
During maintenance work on the brake system, these small parts are often lost. The bleeder nipple can then become clogged and maintenance of the brake system becomes impossible the next time. A cover should therefore always be installed!
Available
€2.99
*
6mm clamp for fuel hoses. Delivered is 1 piece.
Available
€1.99
*
Hose clamps can be used in almost any application. Whether as reinforcement of the rubber mountings of the exhaust, or as a normal water hose clamp.
Available
€1.29
*
NEW
Bei diesem Artikel handelt es sich um ein Original Ersatzteil (OEM) der Marke Aprilia OEM Artikelnummer zu Vergleichszwecken: 00H01600911 Lieferumfang: 1 Stck.
Available
€1.99
*
NEW
Bei diesem Artikel handelt es sich um ein Originalersatzteil der Firma Aprilia OEM Artikelnummer zu Vergleichszwecken : CM314101 Lieferumfang: 1
Out of Stock
€17.99
*
NEW
Bei diesem Artikel handelt es sich um ein Originalersatzteil der Marke Aprilia Standard M5 Blechmutter zur Befestigung der meisten gängigen Verkleidungsschrauben.
Available
€1.99
*
NEW
Die original Piaggio-Buchse bzw. der Limit-Stop mit der Teilenummer B044048 ist ein kleines, aber wichtiges Ersatzteil im Bereich der Vordergabelaufhängung oder Gabelaufnahme diverser Modelle. Sie sorgt dafür, dass Anschläge oder...
Available
€7.99
*
NEW
Retaining rubber radiator, Outer diameter 23.5 mm x inner diameter 11 mm x height 10 mm
This rubber bushing for the radiator bracket is used for secure and low-vibration mounting of the radiator. It effectively absorbs vibrations and thus protects the radiator from damage. Thanks to the elastic material, it fits perfectly...
Almost gone
€3.99
*
Rubber grommets assortment, 180-piece
More protection, less stress during installation. With this 180-piece rubber grommet set, you get everything you need to route cables cleanly through metal sheets - without any sharp edges or vibrations. The open grommets effectively...
Almost gone
€11.99
*
Assortment box for shaft retaining rings BGS, Outer rings 8-19mm 78-piece
A must for anyone who likes to do their own work in the garage or workshop. Assortment consisting of 78 parts. Outer shaft retaining rings including fan box. Scope of delivery: 20 circlips Ø 8 mm 20 circlips Ø 10 mm 16 Ø 12 mm circlips...
Available
€6.99
*
Domino throttle cable nipple, universell
This is a spare part for many common throttle cables. Dimensions: 5.5mm x 7.5mm
Available
€1.99
*
Kickstarter Gummi, universell, schwarz
Wenn der Kickstarter deines Bikes zwar funktioniert, aber bei jedem Tritt zur rutschigen Rutschpartie wird – dann wird’s Zeit für einen Kickstarter-Gummi. Dieses universelle teil, in schlichtem Schwarz, sorgt dafür, dass du wieder...
Out of Stock
€2.99
*
Throttle cable intermediate tensioner, universell
This intermediate tensioner is a practical accessory for adjustments or simply to adjust the tension of a Bowden cable. With a spring travel of 18 mm, it enables precise adjustment of the cable tension.
Available
€1.50
*
This item is an original spare part from the Piaggio brand. OEM part number for comparison purposes: CM001907
Available
€1.99
*
Mounting bracket Schmitt, universell
Universal with rubber buffer, e.g. for radiators, tanks, custom panels etc...
Almost gone
€9.99
*
Gearbox bearing / Needle roller bearing / Shift shaft bearing, universell, 12x16x10
This item is a cheap alternative to the expensive original spare part. The bearing corresponds to the original in shape, dimensions and connections. It can be used in different places of different bikes. OEM part number for comparison...
Available
€2.99
*
This article is an original spare part (OEM) from Aprilia OEM part number for comparison purposes : PIA-AP8101927 Scope of delivery: 1
Out of Stock
€4.33
*
This item is an original spare part (OEM) from Aprilia OEM part number for comparison purposes : PIA-AP8101743 Scope of delivery: 1
Out of Stock
€6.13
*
This article is an original spare part (OEM) from Aprilia OEM part number for comparison purposes : PIA-AP8120536 Scope of delivery: 1
Out of Stock
€6.56
*
This article is an original spare part (OEM) from Aprilia OEM part number for comparison purposes : PIA-AP8101573 Scope of delivery: 1
Out of Stock
€3.38
*
This article is an original spare part (OEM) from Piaggio OEM part number for comparison purposes : PIA-CM001909 Scope of delivery: 1
Available
€2.12
*
Hose clamp for fixing the carburettor in the intake manifold or to fix air filter hoses or similar. Original Piaggio spare part, but universally applicable on any other vehicle model. OEM for comparison 842202
Out of Stock
€2.50
*
Rubber washer fairing screw, 5,5x14x1,5mm, 10 piece
Universal rubber rings for use under fairing screws. The rubber ring protects the paintwork / attachments from pressure points. 10 pieces of rubber rings 5,5x14x1,5mm are delivered.
Available
€2.99
*
Viewed