1. Choose model
RS 125 (ab 2025, XTA (Euro5+))
RS 125 (2021 bis 2024, XA- Euro5)
RS 125 (2017 bis 2020, KC - Euro4)
RS4 125 (2011 bis 2017, TW - Euro3)
RS 125 (2006 bis 2013, RM/RD)
RS 125 (1995 bis 2005, MP/SF)
2. Filter by category
No results were found for the filter!
Auslaufartikel - leider nicht mehr verfügbar Alternative: Auspufffeder universal, 44mm Auspufffeder universal, 70mm entlastet
Out of Stock
€5.99
*
This article is an original spare part (OEM) from Aprilia OEM part number for comparison purposes : PIA-AP8101927 Scope of delivery: 1
Out of Stock
€4.33
*
This item is an original spare part (OEM) from Aprilia OEM part number for comparison purposes : PIA-AP8101743 Scope of delivery: 1
Out of Stock
€6.13
*
This article is an original spare part (OEM) from Aprilia OEM part number for comparison purposes : PIA-AP8120536 Scope of delivery: 1
Out of Stock
€6.56
*
This article is an original spare part (OEM) from Aprilia OEM part number for comparison purposes : PIA-AP8101573 Scope of delivery: 1
Out of Stock
€3.38
*
This article is an original spare part (OEM) from Aprilia OEM part number for comparison purposes : PIA-601345 Scope of delivery: 1
Out of Stock
€12.02
*
This article is an original spare part (OEM) from Piaggio OEM part number for comparison purposes : PIA-CM001909 Scope of delivery: 1
Out of Stock
€2.12
*
This article is an original spare part (OEM) from Piaggio OEM part number for comparison purposes : PIA-B016808 Scope of delivery: 1
Available
€1.49
*
Crankshaft bearing set, Rotax 122/123, Aprilia RS 125, RX/SX 125
Replacement crankshaft bearings for the Rotax 122 & 123 engine. Scope of delivery Incl. both main bearings, a new piston pin bearing and the two crankshaft seal rings. Bearing type: 6206 C3
Available
€41.95
*
Thread repair insert, M14 for thread spark plug / cylinder head
Thread insert - also known as threaded bush - for repairing defective spark plug threads M14x12.7mm on the cylinder head. The defective original thread is extended to M18. To do this, the old thread is drilled out to 16.5mm with a drill...
Available
€4.99
*
The cross-head of the coupling screws is known to quickly spin out. At some point it becomes difficult to unscrew or properly tighten the screws at all. The only remedy is new screws. Here we can offer a set consisting of 5 pcs. original...
Available
€3.99
*
Cap nuts / trim nut set, M7, 4 Stck
These nuts are suitable for use as cylinder head nuts, for example.
Available
€5.99
*
Hose clamp for fixing the carburettor in the intake manifold or to fix air filter hoses or similar. Original Piaggio spare part, but universally applicable on any other vehicle model. OEM for comparison 842202
Almost gone
€2.50
*
For fairing parts Screw with flange / collar for fairing parts. Original spare part from Piaggio. OEM number: 575249 This screw is of course also very suitable for the fairing of other vehicle brands. Dimensions: Thread: M6 Length: 22mm
Available
€0.99
*
Rubber washer fairing screw, 5,5x14x1,5mm, 10 piece
Universal rubber rings for use under fairing screws. The rubber ring protects the paintwork / attachments from pressure points. 10 pieces of rubber rings 5,5x14x1,5mm are delivered.
Available
€2.99
*
Spring clutch lever Domino, universal
The return spring on the clutch lever guarantees that it always springs back to its original position. If the spring is worn out, it must be replaced as quickly as possible. We offer an inexpensive alternative for this. In plug & play...
Available
€2.49
*
Quick release fairing bolt set, 6mm, 10 stck.
Every owner of a racing bike knows how annoying it is to have to dismantle half the fairing for the smallest work steps on the moped. With this quick release set, the annoying screws of the past. The actual screws are provided with an...
Available
€39.95
*
Screw, M8 x 25 mm, flat head / internal hexagon (Allen), stepped
These bolts are usually used as brake disc bolts or sprocket bolts. Thread: M8 Head: Flat / Allen Length: 25 mm
Out of Stock
€2.49
*
Screw, M6 x 18mm, hexagon socket (Allen), V2A
Universal stainless steel screw with hexagon socket and cylindrical head. Technical data Thread: M6 Length: 18 mm
Available
€1.29
*
Screw, M6 x 30mm, hexagon socket (Allen)
Universal, zinc-plated (stainless) standard screw with hexagon socket (Allen) and cylindrical head. Technical data Thread: M6 Length: 30 mm
Available
€1.29
*
Screw, M6 x 16 mm, hexagon socket, flat head
Round head hexagon socket screw, such screws are often used for fairing parts. Technical data Head: Flat / Round Thread: M6 Length: 16 mm
Available
€1.29
*
Screw, M4 x 8mm, countersunk head/cross recess, black
For example for various brake pump covers, but can of course also be used everywhere else. Technical data Thread: M4 Head: countersunk / cross recess Length: 12 mm
Available
€1.29
*
This item is an original spare part (OEM) of the brand Piaggio. OEM part number for comparison purposes 00H02810181, ODN00H02810181, 847545 Scope of delivery: 1 pc.
Available
€5.50
*
This item is an original spare part (OEM) of the brand Piaggio. OEM part number for comparison purposes 000H02810561, ODN00H02810561, 847541 Scope of delivery: 1 pc.
Available
€2.50
*
Viewed