1. Choose model
SMR 125 (2011 bis 2013, A500AB)
No results were found for the filter!
The connection width of the filter is 5-6 mm. Thus, the gasoline hoses that we offer are a perfect fit. Inside is a durable lamellar filter. ⚠️Bitte Note flow direction - arrow is printed on.⚠️
Available
€2.99
*
Von Radical Racing bieten wir hier einen High-Quality-Flachschieber-Vergaser mit einer Bohrung von 24mm an. Der Anthrazitfarben pulverbeschichtet was ihm rein Optisch ein sportlicheres Finish verleiht. Verglichen mit anderen farbigen...
Available
€99.95
*
Herewith we offer you a high quality flat slide carburettor with a bore of 24mm. It is powder coated in anthracite, which gives it a purely optical sporty finish. Compared to other coloured carburettors, this paint cannot flake off and...
Available
€99.95
*
Here we offer a vacuum fuel tap for all motorcycle models with carburetor. The fuel tap is simply pushed into the tank instead of the old one and can also be used to convert from manual operation to automatic operation. We recommend to...
Available
€8.99
*
Here we offer a simple choke, with an actuator, which can be installed in the fairing of the vehicle as desired. The lever is delivered with a cable pull, can only be used in vehicles with carburetor.
Available
€12.99
*
6mm clamp for fuel hoses. Delivered is 1 piece.
Available
€1.99
*
Fuel hose with one meter length and 5mm inner diameter. In many different colours. In addition to its actual use as a petrol hose, it can also be used as a hose for many other purposes. Available in many different colours. The hose can...
Available
€2.99
*
Imported from Malaysia to offer the best possible performance, the intake manifold from UMA Racing . The UMA intake manifold is the ideal solution for Minarelli YI 3 engines with a diameter of 34 mm and 2-point input , especially for the...
Almost gone
€56.95
*
The UMA intake manifold with 32 mm is an essential attachment part for your Yamaha Yzfr or Mt 125. It is important not to skimp on essential parts for the quality of the gasoline-air mixture and thus an optimal power development. The UMA...
Almost gone
€54.95
*
The UMA air filter connection is an essential component for your Yamaha YZFR 125. It is responsible for ensuring an optimal gasoline-air mixture. So, in order to burn the gasoline efficiently, it is important that everything is tight and...
Almost gone
€32.95
*
The UMA intake manifold for the YI engines is an essential part for the cylinder. It injects the fuel&air and ensures an optimal gasoline-air mixture. It is virtually the A and O for the optimal power development. That's why you...
Almost gone
€54.95
*
34mm intake manifold from UMA-Racing, imported for you from faraway Malaysia. The intake manifold with 34mm is especially in conjunction with the 34mm throttle body from UMA-Racing an outstanding investment in your 125 Yamaha. The intake...
Almost gone
€54.95
*
Float chamber drain plug, PWK Carburetor, Orange
Simple styling part for flat slide and type PWK carburetor. The screw is made of anodized aluminum. Delivery Incl. gasket
Available
€6.00
*
Oil hose, 2,2x4mm, 5m long, green, universal
Here we offer you a transparent green oil hose. Dimensions: Inner diameter: 2,2mm Outer diameter: 4mm Length: 5m
Available
€3.49
*
Oil hose, 2,5x5mm, 5m long, green, universal
Here we offer you a transparent green oil hose. Dimensions: Inner diameter: 2,5mm Outer diameter: 5mm Length: 5m
Available
€3.99
*
Gasoline filter, Nylon, 6mm
This fuel filter has a bright nylon filter inside. This allows you to always see what is filtered. To install, simply split your fuel hose and insert the filter in the middle. Then you can secure the filter with clamps and you are done....
Available
€1.99
*
Carburettor DellOrto PHBH 28 BS, universal
The PHBH 28mm version can be used as a replacement carburettor on various 125cc vehicles (e.g. RS 125). On 125s with a smaller carburettor, it can even have a slight performance-enhancing effect if tuned correctly. Note Does NOT have an...
Available
€139.90
*
Benzinhahn, universal, M16 x 1,5
Largely universal, vacuum-controlled petrol tap with screw connection. The scope of delivery also includes the pre-filter (tube), which sits in the petrol tap. Suitable for all petrol tanks with corresponding thread & vacuum connection....
Available
€10.99
*
Oil hose, universal
In the course of time the original hose can become porous, so that oil leaks out. This will not only make your engine dirty, but it will also lose lubrication, which can lead to the dreaded piston jam. 1m - universally applicable. 3 x 5mm
Available
€2.99
*
Petrol tap, universal
Manual fuel tap. Especially useful for converted carburettors or intake manifolds which are not equipped with a vacuum connection. Usually the vacuum taps are then drilled through. In order to prevent the unintentional leakage of petrol...
Available
€8.49
*
Spring clip for fuel line
Spring clip for a tight fit of the fuel hose on the fuel tap and carburetor connection. 8,8 - 9,5mm
Available
€2.99
*
Viewed