Tip Use our  Bike-Filter to get only suitable articles displayed.
0 Article
 

Suction & injection system

Close filters
3 From 4
No results were found for the filter!
ECU Programming Kit Top Performances
ECU Programming Kit Top Performances, Big Bore, YI-3 Motoren
With this programming kit from the Italian tuning specialist Top Performances, the injection programs from the injection control unit can be changed. The supplied CD contains the programs and the instructions with which new mappings can...

Almost gone

€99.95 *
Camshaft KTM OEM
Camshaft KTM OEM, KTM 4T engines (KTM Duke/RC, Husqvarna Svartpilen/Vitpilen), exhaust
This item is an original spare part of the brand KTM. OEM part number for comparison purposes 93536010033

Almost gone

€169.90 *
Injection pressure regulator Big Bore Top Performance
Injection pressure regulator Big Bore Top Performance, Yamaha YZF-R / MT 125 Bj. 08-16 (RE06, RE11)
This pressure regulator increases the fuel pressure of the injection pump from 2.5 bar to 3.5 bar. This also increases the injection quantity, since the opening times of the injection valve do not change. This makes it very easy to...

Out of Stock

€39.95 *
Membran Doppelventil Italkit
Membran Doppelventil Italkit, Cagiva Mito 125, Carbon
From the manufacturer Italkit comes a reed box type VForce. Italkit has developed a removable double prism reed box with carbon blades. It is specially designed to optimize gas circulation and flow. In addition, the inlet with a diameter...

Available

€109.90 *
Pneumatic exhaust valve Italkit
Pneumatic exhaust valve Italkit, Cagiva Mito 125 (99-06)
for cylinder models 60433 (old) and 73037 (modern). This valve is actuated by the exhaust gas pressure and opens in stages from 5,000 to 6,000 rpm. Homologation: No

Available

€119.90 *
Carburettor Naraku PZ26
Carburettor Naraku PZ26, Derbi Senda 125ccm 4-stroke, 26mm
This carburetor is recommended as a spare part for 125cc 4-stroke engines. It also fits Yamaha and Suzuki 4T engines. The Naraku PZ26 carburetor is equipped with manual flap choke. technical data: main jet: 85 (5mm) hole spacing intake...

Almost gone

€29.90 *
ECU engine control unit Malossi Force Master
ECU engine control unit Malossi Force Master, Yamaha YZF-R / MT 125 ab Bj. 2014 (RE11, 29, 39)
Single Malossi Force-Master engine control unit. Required by Malossi to use the cylinder kit: "3114852". The Malossi Force Master offers the possibility to optimize the mixture, respectively the injection of the engine in all load...

Almost gone

€285.00 *
Injector Piaggio OEM
Injector Piaggio OEM, Aprilia RS4/RS/SX 125 ab Bj. 11-17
Replacement fuel injector from Piaggio. Suitable for 125cc 4-T Aprilia engines. OEM part number for comparison 890225

Almost gone

€139.90 *
Fuel tap Yamaha OEM
Fuel tap Yamaha OEM, Yamaha DT 125 from year 04-06, original spare part
Fuel tap Original spare part OEM part number for comparison purposes 18G245000200

Almost gone

€99.95 *
Fuel tap Aprilia OEM
Fuel tap Aprilia OEM, Aprilia RS 125 until 2013
Fuel tap Original spare part OEM part number for comparison purposes AP8102819

Available

€29.99 *
Exhaust slider Italkit Racing Exhaust slider Italkit Racing, Rotax 122/123 (Aprilia RS/RX/SX 125, 2-stroke), adjustable
The exhaust slide valve of throttled Rotax 122 & 123 engines is opened abruptly at 8,000 rpm by the electrical control of the slide valve. Not everyone can cope with this sudden power delivery and not everyone wants to be driving at such...

Available

€139.90 * ; €119.90 *
Exhaust slider Italkit Racing
Exhaust slider Italkit Racing, Rotax 122/123
Pneumatic exhaust system for the Aprilia RS 125 engine. Most people will have noticed on their 125cc Aprilia RS that when the engine is de-throttled the power is suddenly released at around 8000 rpm by opening the exhaust slide. As this...

Available

€155.90 *
Polini wiring harness
Polini wiring harness, Yamaha YZF-R 125 all models/ MT 125/ WR 125
This wiring harness is needed to connect the Polini ECU device to Yamaha injectors.

Almost gone

€24.95 *
Injection system Malossi Force Master II
Injection system Malossi Force Master II, Yamaha YZF-R 125, WR 125 until 2013
The Malossi Force Master II system primarily manipulates the injection times, which are passed on from the original control unit to the injection nozzle. This system is included in the 180cc cylinder kit. With three different...

Out of Stock

€285.00 *
Chiptuning Athena GET
Chiptuning Athena GET, KTM Duke 125 year 2011-2016
With the Athena GET Chiptuning, the original performance of the KTM Duke can be increased by a few extra horsepower, depending on which setup is used. The GET unit is simply exchanged for the original CDI control unit. Afterwards the...

Almost gone

€329.95 *
Inlet manifold / reed block kit Italkit
Inlet manifold / reed block kit Italkit, V-Force, Rotax 122/123, 32mm - 34mm carburetor
The V-Force reed valve block from Italkit has a maximum cross-section on the smallest valves. This allows the diaphragms to open and close with less inherent gas force, resulting in higher efficiency and improved motor performance....

Available

€109.90 *
Flachschieber Vergaser Radical Racing
Flachschieber Vergaser Radical Racing, 24mm
Von Radical Racing bieten wir hier einen High-Quality-Flachschieber-Vergaser mit einer Bohrung von 24mm an. Der Anthrazitfarben pulverbeschichtet was ihm rein Optisch ein sportlicheres Finish verleiht. Verglichen mit anderen farbigen...

Available

€99.95 *
Flat slide carburettor
Flat slide carburettor, 28mm
Herewith we offer you a high quality flat slide carburettor with a bore of 24mm. It is powder coated in anthracite, which gives it a purely optical sporty finish. Compared to other coloured carburettors, this paint cannot flake off and...

Available

€99.95 *
3 From 4

Du bist auf der Suche nach hochwertigen Ersatzteilen oder Tuningkomponenten für dein 125er Motorrad? Dann bist du bei uns genau richtig! Als Experten für ansaug- und Einspritzsysteme bieten wir alles, was du für eine Reparatur oder Optimierung deines Bikes brauchst.

Ob du nun auf der Suche nach einem neuen Luftfilter, Vergaser oder sogar einem kompletten Einspritzsystem bist – bei uns wirst du garantiert fündig. Und das Beste daran: Unsere Produkte sind nicht nur von bester Qualität, sondern auch noch zu erschwinglichen Preisen.

Egal, ob du ein erfahrener Tuner bist oder gerade erst damit beginnst, dein Bike aufzumotzen: Mit unserem breiten Angebot an ansaug- und Einspritzsystemen bist du für jede Situation gerüstet. Auch wenn du dein Bike einfach nur mit hochwertigen Ersatzteilen auf Vordermann bringen möchtest, sind wir die richtige Adresse für dich. Also worauf wartest du noch? Schau jetzt bei uns vorbei und sichere dir alles, was du für dein 125er Motorrad brauchst! Wir freuen uns auf dich!

Viewed