Tip Use our  Bike-Filter to get only suitable articles displayed.
0 Article
 

Suction & injection system

Filter
Close filters
4 From 4
No results were found for the filter!
Fuel filter Motoflow
Fuel filter Motoflow, Transparent, universal
The connection width of the filter is 5-6 mm. Thus, the gasoline hoses that we offer are a perfect fit. Inside is a durable lamellar filter. ⚠️Bitte Note flow direction - arrow is printed on.⚠️

Available

€2.99 *
Benzinhahn
Benzinhahn, Rieju Marathon (MRT) 125
Replacement petrol tap for Rieju motorcycles (MRT). Technical data Diameter: 15mm Cock positions : Left side : To Top : Open Right : Reserve Incl. fuel filter. OEM number for comparison : 0/000.370.0500

Available

€11.99 *
Benzinhahn Original Replica
Benzinhahn Original Replica, Vacuum, universal
Here we offer a vacuum fuel tap for all motorcycle models with carburetor. The fuel tap is simply pushed into the tank instead of the old one and can also be used to convert from manual operation to automatic operation. We recommend to...

Available

€8.99 *
Manual choke cable
Manual choke cable, universal, anodized handle
Here we offer a simple choke, with an actuator, which can be installed in the fairing of the vehicle as desired. The lever is delivered with a cable pull, can only be used in vehicles with carburetor.

Available

€12.99 *
Clamp
Clamp, universal, for example f. petrol, water or oil hoses, 6mm
6mm clamp for fuel hoses. Delivered is 1 piece.

Available

€1.99 *
Fuel Hose
Fuel Hose, 1 meter, d=5mm, different colours
Fuel hose with one meter length and 5mm inner diameter. In many different colours. In addition to its actual use as a petrol hose, it can also be used as a hose for many other purposes. Available in many different colours. The hose can...

Available

€2.99 *
Float chamber drain plug Float chamber drain plug, PWK Carburetor, Orange
Simple styling part for flat slide and type PWK carburetor. The screw is made of anodized aluminum. Delivery Incl. gasket

Available

€6.00 *
Oil hose Oil hose, 2,2x4mm, 5m long, green, universal
Here we offer you a transparent green oil hose. Dimensions: Inner diameter: 2,2mm Outer diameter: 4mm Length: 5m

Available

€3.49 *
Oil hose Oil hose, 2,5x5mm, 5m long, green, universal
Here we offer you a transparent green oil hose. Dimensions: Inner diameter: 2,5mm Outer diameter: 5mm Length: 5m

Available

€3.99 *
Gasoline filter Gasoline filter, Nylon, 6mm
This fuel filter has a bright nylon filter inside. This allows you to always see what is filtered. To install, simply split your fuel hose and insert the filter in the middle. Then you can secure the filter with clamps and you are done....

Available

€1.99 *
Carburettor DellOrto PHBH 28 BS Carburettor DellOrto PHBH 28 BS, universal
The PHBH 28mm version can be used as a replacement carburettor on various 125cc vehicles (e.g. RS 125). On 125s with a smaller carburettor, it can even have a slight performance-enhancing effect if tuned correctly. Note Does NOT have an...

Available

€139.90 *
Benzinhahn Benzinhahn, universal, M16 x 1,5
Largely universal, vacuum-controlled petrol tap with screw connection. The scope of delivery also includes the pre-filter (tube), which sits in the petrol tap. Suitable for all petrol tanks with corresponding thread & vacuum connection....

Available

€10.99 *
Carburetor Racing PWK34 Carburetor Racing PWK34, Incl. Powerjet
The recessed intake tract ensures better airflow and thus improved engine response. The outer dimensions of the carburettor as well as the intake manifold connection width (up to 30mm: 35mm/ from 32mm: 40mm) have been reduced for easier...

Available

€129.90 *
Oil hose Oil hose, universal
In the course of time the original hose can become porous, so that oil leaks out. This will not only make your engine dirty, but it will also lose lubrication, which can lead to the dreaded piston jam. 1m - universally applicable. 3 x 5mm

Available

€2.99 *
Petrol tap Petrol tap, universal
Manual fuel tap. Especially useful for converted carburettors or intake manifolds which are not equipped with a vacuum connection. Usually the vacuum taps are then drilled through. In order to prevent the unintentional leakage of petrol...

Available

€8.49 *
Spring clip for fuel line Spring clip for fuel line
Spring clip for a tight fit of the fuel hose on the fuel tap and carburetor connection. 8,8 - 9,5mm

Available

€2.99 *
4 From 4

Du bist auf der Suche nach hochwertigen Ersatzteilen oder Tuningkomponenten für dein 125er Motorrad? Dann bist du bei uns genau richtig! Als Experten für ansaug- und Einspritzsysteme bieten wir alles, was du für eine Reparatur oder Optimierung deines Bikes brauchst.

Ob du nun auf der Suche nach einem neuen Luftfilter, Vergaser oder sogar einem kompletten Einspritzsystem bist – bei uns wirst du garantiert fündig. Und das Beste daran: Unsere Produkte sind nicht nur von bester Qualität, sondern auch noch zu erschwinglichen Preisen.

Egal, ob du ein erfahrener Tuner bist oder gerade erst damit beginnst, dein Bike aufzumotzen: Mit unserem breiten Angebot an ansaug- und Einspritzsystemen bist du für jede Situation gerüstet. Auch wenn du dein Bike einfach nur mit hochwertigen Ersatzteilen auf Vordermann bringen möchtest, sind wir die richtige Adresse für dich. Also worauf wartest du noch? Schau jetzt bei uns vorbei und sichere dir alles, was du für dein 125er Motorrad brauchst! Wir freuen uns auf dich!

Viewed