1. Choose model
DT 125 (1999 bis 2006)
No results were found for the filter!
NEW
Spacers for handlebar clamps - So that you can also use them with a different handlebar thickness. For example, if you have 22mm handlebars but 28mm clamps , you can still use them together.
Available
€3.99
*
During maintenance work on the brake system, these small parts are often lost. The bleeder nipple can then become clogged and maintenance of the brake system becomes impossible the next time. A cover should therefore always be installed!
Available
€2.99
*
6mm clamp for fuel hoses. Delivered is 1 piece.
Available
€1.99
*
Hose clamps can be used in almost any application. Whether as reinforcement of the rubber mountings of the exhaust, or as a normal water hose clamp.
Available
€1.29
*
NEW
Gummi-Durchgangstüllen Sortiment, 180-teilig
Mehr Schutz, weniger Stress beim Verlegen. Mit diesem 180-teiligen Gummitüllen-Set bekommst du alles, was du brauchst, um Kabel sauber durch Metallbleche zu führen – ganz ohne scharfe Kanten oder Vibrationen. Die offenen Tüllen dämpfen...
Almost gone
€11.99
*
NEW
Sortimentskasten Wellensicherungsringe BGS, Außenringe 8-19mm 78-teilig
Für jeden der gerne selber schraubt, ein muss für die Garage oder Werkstatt. Sortiment bestehend aus 78-Teile. Außenwellensicherungsringe inklusive Fächerkasten. Lieferumfang: 20 Seegerringe Ø 8 mm 20 Seegerringe Ø 10 mm 16 Seegerringe Ø...
Out of Stock
€6.99
*
Domino throttle cable nipple, universell
This is a spare part for many common throttle cables. Dimensions: 5.5mm x 7.5mm
Available
€1.99
*
Kickstarter Gummi, universell, schwarz
Wenn der Kickstarter deines Bikes zwar funktioniert, aber bei jedem Tritt zur rutschigen Rutschpartie wird – dann wird’s Zeit für einen Kickstarter-Gummi. Dieses universelle teil, in schlichtem Schwarz, sorgt dafür, dass du wieder...
Available
€2.99
*
Throttle cable intermediate tensioner, universell
This intermediate tensioner is a practical accessory for adjustments or simply to adjust the tension of a Bowden cable. With a spring travel of 18 mm, it enables precise adjustment of the cable tension.
Out of Stock
€1.50
*
This article is an original spare part (OEM) from Yamaha OEM part number for comparison purposes : 902012201800 Scope of delivery: 1
Almost gone
€5.99
*
Single spacer washer for mounting the swing arm / swing arm bearing. Scope of delivery 1 piece. One is required for the right and one for the left. OEM part number for comparison purposes Yamaha: 90201254H800
Almost gone
€3.65
*
Mounting bracket Schmitt, universell
Universal with rubber buffer, e.g. for radiators, tanks, custom panels etc...
Available
€9.99
*
This item is an original spare part (OEM) of the brand Yamaha/Minarelli. The clip is used in various places for various bikes. An example on Yamaha motorcycles is the water pump. OEM part number for comparison purposes 990091040000,...
Available
€1.99
*
Gearbox bearing / Needle roller bearing / Shift shaft bearing, universell, 12x16x10
This item is a cheap alternative to the expensive original spare part. The bearing corresponds to the original in shape, dimensions and connections. It can be used in different places of different bikes. OEM part number for comparison...
Available
€2.99
*
This item is an original spare part (OEM) from Yamaha OEM part number for comparison purposes : YAM-904502800100 Scope of delivery: 1
Out of Stock
€7.94
*
This item is an original spare part (OEM) from Yamaha OEM part number for comparison purposes : YAM-904672005000 Scope of delivery: 1
Out of Stock
€6.05
*
Hose clamp for fixing the carburettor in the intake manifold or to fix air filter hoses or similar. Original Piaggio spare part, but universally applicable on any other vehicle model. OEM for comparison 842202
Out of Stock
€2.50
*
Rubber washer fairing screw, 5,5x14x1,5mm, 10 piece
Universal rubber rings for use under fairing screws. The rubber ring protects the paintwork / attachments from pressure points. 10 pieces of rubber rings 5,5x14x1,5mm are delivered.
Available
€2.99
*
Guide clip, universal, f. Cables and hoses
This is a(n) retaining clamp/guide clip for various cable guides on many bikes. Dimensions: - Material thickness: 5mm - Inside: 15mm - Outside: 20mm - Insertion length: 12mm OEM part number for comparison 00H02201591
Available
€2.49
*
18mm hose clamp from Piaggio, can of course be used on all vehicles. OEM part number for comparison purposes 879888; 256074; 577557; AP8104072
Available
€4.99
*
Available
€6.49
*
Available
€1.49
*
Exhaust connection rubber, Yamaha DT 50, double reinforced version
Replacement rubber used between the rear silencer and exhaust manifold. These quickly crack and tear due to the high stress caused by temperature fluctuations and enormous heat.
Available
€3.59
*
Available
€1.99
*
Viewed