1. Choose model
DT 125 (1999 bis 2006)
2. Filter by category
No results were found for the filter!
Spacers for handlebar clamps - So that you can also use them with a different handlebar thickness. For example, if you have 22mm handlebars but 28mm clamps , you can still use them together.
Available
€3.99
*
Available
€2.99
*
Simple exhaust spring, to hang the exhaust system on the cylinder, or to connect the muffler & manifold. Can also be used for other tinkering. The spring has ring eyelets at both ends. A little trickier to fit, but the hold is better!...
Available
€2.59
*
Typical brake disks, or sprocket bolt with blue dry thread lock (medium strength). Can also be used anywhere else on the moped. Thread: M6 Head: Flat / Torx Length: 20 mm
Available
€1.99
*
During maintenance work on the brake system, these small parts are often lost. The bleeder nipple can then become clogged and maintenance of the brake system becomes impossible the next time. A cover should therefore always be installed!
Available
€2.99
*
Almost universally applicable adjusting screw for clutch cables. Thread: M6 Inner diameter: 8,5 mm
Available
€3.49
*
Wheel bearing which can be used for different vehicles as front or rear wheel bearing. Note Please compare the technical data of this bearing with your original wheel bearing. Technical data Outside diameter: 32 mm width: 10 mm Inner...
Available
€5.99
*
Universal SKF bearing of type "6202-2RS", sealed on both sides. Suitable for example as rear or front axle bearing. But please compare your bearing type before ordering! Technical data Type : 6202 Inner diameter : 15 mm Outside diameter...
Available
€5.99
*
Magnetic oil drain plugs collect the metallic abrasion at the magnet and thus protect the engine & gearbox from excessive wear. Supplied with sealing ring.
Available
€5.99
*
Nut with M7 thread for fixing the cylinder head. A set of 4 special nuts is supplied. The nuts have a length of 13mm and have a collar. Special thread M7. Suitable for all Minarelli, Kymco, MBK, Yamaha, CPI, Keeway engines and other...
Available
€3.99
*
6mm clamp for fuel hoses. Delivered is 1 piece.
Available
€1.99
*
We can supply these spare clips for your fairing at a reasonable price. 10 pieces - For M6 screws!
Available
€8.99
*
Here we can offer you 10 sheet metal nuts incl. the suitable lens head cross recessed screws. The screws and lenses are especially suitable for fixing the fairing. The brass-coloured screws also give your moped a noble gold screw look....
Available
€5.19
*
Hose clamps can be used in almost any application. Whether as reinforcement of the rubber mountings of the exhaust, or as a normal water hose clamp.
Available
€1.29
*
Motorcycle mirrors as well as the manufacturer's built-in mount on the handlebars are unfortunately not always the same. So it is sometimes necessary to get suitable adapters for the mirror to be able to screw the mirror onto the moped....
Available
From €2.50
*
NEW
Bei diesem Artikel handelt es sich um ein Originalersatzteil (OEM) der Firma Yamaha OEM Artikelnummer zu Vergleichszwecken : 3Y1153610000 ( ersetzt 33M153610000, 3Y11536100)
Out of Stock
€22.99
*
NEW
Bei diesem Artikel handelt es sich um ein Originalersatzteil (OEM) der Firma Yamaha O-Ring / Dichtring OEM Artikelnummer zu Vergleichszwecken : 931011014200
Out of Stock
€3.99
*
NEW
Bei diesem Artikel handelt es sich um ein Originalersatzteil (OEM) der Firma Yamaha OEM Artikelnummer zu Vergleichszwecken : 990800760000 (ersetzt 934300701200, 934300702000, 934301501200, 990000560000, 9900005600BL, 990010760000,...
Out of Stock
€1.99
*
NEW
Retaining rubber radiator, Outer diameter 23.5 mm x inner diameter 11 mm x height 10 mm
This rubber bushing for the radiator bracket is used for secure and low-vibration mounting of the radiator. It effectively absorbs vibrations and thus protects the radiator from damage. Thanks to the elastic material, it fits perfectly...
Available
€3.99
*
NEW
Der Original Yamaha Kupplungsbefestigungsschraube 901190500100 (Ersatz 9011610390BL, 901190582700, M01190500100) wird im Kupplungsbereich deiner DT125 / DT125R / DT125RE / DT125X verwendet. Er dient zur Befestigung von Bauteilen rund um...
Out of Stock
€2.89
*
NEW
Der O-Ring 93210-27778-00 (Ersatz 932102719400, 932102737000) dichtet zuverlässig den Thermostat- oder Kühlerschlauchanschluss deiner Yamaha DT125 / DT125R / DT125X ab. Er sorgt für eine perfekte Abdichtung im Kühlsystem und verhindert...
Out of Stock
€6.99
*
NEW
Bei diesem Artikel handelt es sich um ein Originalprodukt der Marke Yamaha OEM Nummer zu Vergleichszwecken : 902151227100 ( Teilenummern ersetzt 902151227800)
Out of Stock
€4.99
*
NEW
Original Ritzelwellen Öldichtring. Zur fachgerechten reparatur einer undichten Welle. OEM Artikelnummer zu Vergleichszwecken Yamaha: 931022604200
Out of Stock
€13.95
*
NEW
The Beta OEM bolt for the pinion retaining plate is a small but indispensable original part for your Beta RR 125. It secures the locking plate to the drive pinion and prevents the pinion nut from coming loose while riding - a crucial...
Available
€4.25
*
Viewed