1. Choose model
MT 125 (ab 2025, Euro5+)
MT 125 (2021 bis 2024, RE40 - Euro5)
MT 125 (2020 bis 2020, RE39 - Euro4)
MT 125 (2017 bis 2019, RE29 - Euro4)
MT-125 (2014 bis 2016, RE11 - Euro3)
2. Filter by category
No results were found for the filter!
With these deflection levers, the rear of the Yamaha MT or YZF-R 125 can be lowered by a few centimeters. This makes it easier for smaller riders to get on and off the bike. Note, however, that the preload of the shock absorber should be...
Out of Stock
€29.95
*
When developing the fork seals, SKF focused on maximum sealing performance and therefore uses the highest quality materials for fork seals and dirt wipers. The sealing kits from SKF offer a particularly low "stick-slip" effect - in other...
Almost gone
€35.95
*
Does your fork still look bare and boring? Now you can easily change that. With the Forkshrinks from Factoryfork, you can customize your fork to match your bike. The protectors fit all standard bikes and are easy to fit. You can find...
Almost gone
€49.95
*
Does your fork still look bare and boring? You can now easily change that. With the Forkshrinks from Factoryfork, you can customize your fork to match your bike. The protectors fit all common bikes and are easy to install. You can find...
Out of Stock
€49.95
*
Does your fork still look bare and boring? You can now easily change that. With the Forkshrinks from Factoryfork, you can customize your fork to match your bike. The protectors fit all common bikes and are easy to install. You can find...
Available
€49.95
*
Does your fork still look bare and boring? You can now easily change that. With the Forkshrinks from Factoryfork, you can customize your fork to match your bike. The protectors fit all common bikes and are easy to install. You can find...
Out of Stock
€49.95
*
Does your fork still look bare and boring? You can now easily change that. With the Forkshrinks from Factoryfork, you can customize your fork to match your bike. The protectors fit all common bikes and are easy to install. You can find...
Out of Stock
€49.95
*
Does your fork still look bare and boring? You can now easily change that. With the Forkshrinks from Factoryfork, you can customize your fork to match your bike. The protectors fit all common bikes and are easy to install. You can find...
Available
€49.95
*
This article is an original spare part (OEM) from Yamaha OEM part number for comparison purposes : 901792581100 Scope of delivery: 1
Almost gone
€17.99
*
This article is an original spare part (OEM) from Yamaha OEM part number for comparison purposes : 902012201800 Scope of delivery: 1
Almost gone
€5.99
*
This article is an original spare part from Yamaha OEM part number for comparison purposes : 9017622X0000 Scope of delivery: 1
Available
€19.99
*
This article is an original spare part (OEM) from Yamaha OEM part number for comparison purposes: 93399999X000 Scope of delivery: 1
Out of Stock
€49.95
*
This article is an original spare part from Yamaha OEM part number for comparison purposes : 4FPF34112000 Scope of delivery: 1
Available
€17.95
*
This article is an original spare part (OEM) from Yamaha OEM part number for comparison purposes : 5TL2341E0000 Scope of delivery: 1
Available
€2.79
*
This article is an original spare part (OEM) from Yamaha OEM part number for comparison purposes : 5VLF341E0000 Scope of delivery: 1
Available
€3.99
*
This article is an original spare part from Yamaha OEM part number for comparison purposes : 4FPF34121000 Scope of delivery: 1
Available
€8.99
*
Standard dust cap. 1 piece is supplied. For professional repair, both caps should be replaced! OEM part number for comparison purposes Yamaha: 5D7F31443000
Available
€16.99
*
Standard oil seal for Yamaha forks. 1 piece is supplied. When repairing forks, we always recommend replacing both oil seals on both bars. OEM part number for comparison purposes Yamaha: 5D7F31453000
Out of Stock
€16.99
*
The shock absorber for the Yamaha YZFR 125 has a large damper piston with a diameter of 35/46 mm and uses high-pressure nitrogen gas. The piston rod has a diameter of 16 mm and allows individual adjustment of spring preload, rebound...
Almost gone
€264.90
*
Out of Stock
€289.90
*
Rear lowering, Yamaha YZF-R from year 19, MT from year 20, with ABE
There are several reasons to lower the rear of his machine. The 2 most popular are certainly the visual distinction from identical motorcycles and less difficulty for smaller people. With this product, your Yamaha can be lowered by 35mm....
Almost gone
€139.90
*
This item is an original spare part (OEM) of the brand Yamaha. OEM part number for comparison 5D7F33403000
Available
€319.90
*
Steering head bearing set, Yamaha MT, YZF-R 125 up to year 2018
The steering head bearing is thoroughly checked during the technical inspection of the vehicle. If it is worn out or slightly jammed, the motorcycle will not get a new sticker. The only remedy is to replace the bearing.
Available
€50.95
*
Viewed