1. Choose model
XMAX 125 (2021 bis 2024, SEH3)
2. Filter by category
No results were found for the filter!
Spacers for handlebar clamps - So that you can also use them with a different handlebar thickness. For example, if you have 22mm handlebars but 28mm clamps , you can still use them together.
Available
€3.99
*
This intermediate tensioner is a practical accessory for adjustments or simply to adjust the tension of a Bowden cable. With a spring travel of 18 mm, it enables precise adjustment of the cable tension.
Available
€0.99
*
We can now offer you an oil drain plug that is at least of the same quality and standard as the original. This plug also corresponds to the original in terms of shape, dimensions and function. This engine-specific spare part is...
Available
€22.95
*
Available
€2.99
*
Simple exhaust spring, to hang the exhaust system on the cylinder, or to connect the muffler & manifold. Can also be used for other tinkering. The spring has ring eyelets at both ends. A little trickier to fit, but the hold is better!...
Available
€2.59
*
As this is an engine-specific spare part, it fits various models of the brands: Fantic, Beta, Rieju, HM, Husqvarna and Yamaha. Use the bike filter to see if your bike is included. Replacement drain plug for Yamaha / Minarelli YI engines....
Available
€18.99
*
Typical brake disks, or sprocket bolt with blue dry thread lock (medium strength). Can also be used anywhere else on the moped. Thread: M6 Head: Flat / Torx Length: 20 mm
Available
€1.99
*
During maintenance work on the brake system, these small parts are often lost. The bleeder nipple can then become clogged and maintenance of the brake system becomes impossible the next time. A cover should therefore always be installed!
Available
€2.99
*
Almost universally applicable adjusting screw for clutch cables. Thread: M6 Inner diameter: 8,5 mm
Available
€3.49
*
Wheel bearing which can be used for different vehicles as front or rear wheel bearing. Note Please compare the technical data of this bearing with your original wheel bearing. Technical data Outside diameter: 32 mm width: 10 mm Inner...
Available
€5.99
*
Universal SKF bearing of type "6202-2RS", sealed on both sides. Suitable for example as rear or front axle bearing. But please compare your bearing type before ordering! Technical data Type : 6202 Inner diameter : 15 mm Outside diameter...
Available
€5.99
*
Magnetic oil drain plugs collect the metallic abrasion at the magnet and thus protect the engine & gearbox from excessive wear. Supplied with sealing ring.
Available
€5.99
*
Nut with M7 thread for fixing the cylinder head. A set of 4 special nuts is supplied. The nuts have a length of 13mm and have a collar. Special thread M7. Suitable for all Minarelli, Kymco, MBK, Yamaha, CPI, Keeway engines and other...
Out of Stock
€3.99
*
6mm clamp for fuel hoses. Delivered is 1 piece.
Available
€1.99
*
We can supply these spare clips for your fairing at a reasonable price. 10 pieces - For M6 screws!
Available
€8.99
*
Here we can offer you 10 sheet metal nuts incl. the suitable lens head cross recessed screws. The screws and lenses are especially suitable for fixing the fairing. The brass-coloured screws also give your moped a noble gold screw look....
Available
€5.19
*
Hose clamps can be used in almost any application. Whether as reinforcement of the rubber mountings of the exhaust, or as a normal water hose clamp.
Available
€1.29
*
NEW
The original Honda oil drain plug with part number 90131896650 ensures a secure and tight seal on the oil drain opening. It is precisely matched to Honda engines and guarantees a reliable seal when changing the oil. Damaged or worn drain...
Almost gone
€6.99
*
NEW
Adjustment screw for clutch cable, Various colors, 30 mm, M10, CNC aluminum
The CNC-milled aluminum clutch adjustment screw allows you to adjust your clutch cable quickly and precisely. The large adjustment wheel allows you to adjust the clutch play cleanly and in a controlled manner – even on the road without...
Available
€7.99
*
NEW
This item is an original replacement part (OEM) from Aprilia OEM part number for comparison purposes : 2R000430 Scope of delivery: 1
Available
€0.99
*
NEW
Retaining rubber radiator, Outer diameter 23.5 mm x inner diameter 11 mm x height 10 mm
This rubber bushing for the radiator bracket is used for secure and low-vibration mounting of the radiator. It effectively absorbs vibrations and thus protects the radiator from damage. Thanks to the elastic material, it fits perfectly...
Out of Stock
€3.99
*
The Beta OEM bolt for the pinion retaining plate is a small but indispensable original part for your Beta RR 125. It secures the locking plate to the drive pinion and prevents the pinion nut from coming loose while riding - a crucial...
Available
€4.25
*
Locking bolt, Screw and seal, various Sizes
The oil drain plug is a small but important spare part - it ensures that your engine oil remains safely in the engine housing and can be drained cleanly when changing the oil. If the thread is damaged or the old screw is twisted, this...
Available
€4.99
*
Ball bearing, Type: 608 2RS
The 608 2RS ball bearing is a high-quality bearing sealed on both sides for a wide range of applications on motorcycles, scooters and scooters. Thanks to its precision manufacturing, it offers smooth running, high load capacity and a...
Almost gone
€3.99
*
Viewed