No results were found for the filter!
Spacers for handlebar clamps - So that you can also use them with a different handlebar thickness. For example, if you have 22mm handlebars but 28mm clamps , you can still use them together.
Available
€3.99
*
Schnelleres Tanken und optische Anpassung sind riesige Vorteile, die dieser Tankdeckel mit sich bringt. Zudem kann er einfach per Plug&Play angebracht werden.
Available
€34.95
*
During maintenance work on the brake system, these small parts are often lost. The bleeder nipple can then become clogged and maintenance of the brake system becomes impossible the next time. A cover should therefore always be installed!
Available
€2.99
*
If the washers of the old head bolts are worn, bent or can no longer be removed from the old head bolt, they must be replaced. Complete set of Yamaha original spare parts. OEM part number for comparison 902010860900
Available
€1.99
*
6mm clamp for fuel hoses. Delivered is 1 piece.
Available
€1.99
*
Hose clamps can be used in almost any application. Whether as reinforcement of the rubber mountings of the exhaust, or as a normal water hose clamp.
Available
€1.29
*
NEW
Yamaha Originalersatzteil OEM Artikelnummer zu Vergleichszwecken Yamaha: 3FV259240000; 3LD259240000; 3SP259245100; Lieferumfang 1 Stück
Out of Stock
€12.99
*
NEW
Bei diesem Artikel handelt es sich um ein Originalersatzteil (OEM) der Firma Yamaha OEM Artikelnummer zu Vergleichszwecken : 902151480200 Lieferumfang: 1
Out of Stock
€3.99
*
NEW
Bei diesem Artikel handelt es sich um ein Originalersatzteil (OEM) der Firma Yamaha OEM Artikelnummer zu Vergleichszwecken : 990092050000 Lieferumfang: 1
Out of Stock
€0.99
*
NEW
Bei diesem Artikel handelt es sich um ein Original Ersatzteil (OEM) der Marke Yamaha. OEM Artikelnummer zu Vergleichszwecken 903381600800 Lieferumfang: 1 Stck.
Out of Stock
€3.99
*
NEW
Bei diesem Artikel handelt es sich um ein Originalersatzteil der Marke Yamaha. OEM-Nummer zu Vergleichszwecken: 3C1161930000
Available
€6.99
*
NEW
Bei diesem Artikel handelt es sich um ein Originalprodukt der Marke Yamaha OEM Nummer zu Vergleichszwecken : 5D7E61350000
Out of Stock
€3.99
*
NEW
Retaining rubber radiator, Outer diameter 23.5 mm x inner diameter 11 mm x height 10 mm
This rubber bushing for the radiator bracket is used for secure and low-vibration mounting of the radiator. It effectively absorbs vibrations and thus protects the radiator from damage. Thanks to the elastic material, it fits perfectly...
Almost gone
€3.99
*
Rubber grommets assortment, 180-piece
More protection, less stress during installation. With this 180-piece rubber grommet set, you get everything you need to route cables cleanly through metal sheets - without any sharp edges or vibrations. The open grommets effectively...
Almost gone
€11.99
*
Assortment box for shaft retaining rings BGS, Outer rings 8-19mm 78-piece
A must for anyone who likes to do their own work in the garage or workshop. Assortment consisting of 78 parts. Outer shaft retaining rings including fan box. Scope of delivery: 20 circlips Ø 8 mm 20 circlips Ø 10 mm 16 Ø 12 mm circlips...
Available
€6.99
*
Domino throttle cable nipple, universell
This is a spare part for many common throttle cables. Dimensions: 5.5mm x 7.5mm
Available
€1.99
*
Kickstarter Gummi, universell, schwarz
Wenn der Kickstarter deines Bikes zwar funktioniert, aber bei jedem Tritt zur rutschigen Rutschpartie wird – dann wird’s Zeit für einen Kickstarter-Gummi. Dieses universelle teil, in schlichtem Schwarz, sorgt dafür, dass du wieder...
Out of Stock
€2.99
*
This item is an original spare part (OEM) from the Yamaha/Minarelli brand. We have created a set consisting of the following individual parts: 1x 903403282300 - Large screw 1x 932103281300 - Gasket large 1x 903401482400 - small screw 1x...
Out of Stock
€20.95
*
Throttle cable intermediate tensioner, universell
This intermediate tensioner is a practical accessory for adjustments or simply to adjust the tension of a Bowden cable. With a spring travel of 18 mm, it enables precise adjustment of the cable tension.
Available
€1.50
*
This article is an original spare part (OEM) from Yamaha OEM part number for comparison purposes : 902012201800 Scope of delivery: 1
Almost gone
€5.99
*
Yamaha OEM cover cap. OEM part number: 5D7F58250000
Almost gone
€6.99
*
Cover cap for the mirror screw. 1 piece is supplied! OEM part number for comparison purposes Yamaha: 20PF34690000
Available
€0.19
*
Mounting bracket Schmitt, universell
Universal with rubber buffer, e.g. for radiators, tanks, custom panels etc...
Almost gone
€9.99
*
This item is an original spare part (OEM) of the brand Yamaha/Minarelli. The clip is used in various places for various bikes. An example on Yamaha motorcycles is the water pump. OEM part number for comparison purposes 990091040000,...
Available
€1.99
*
Viewed